Linux Manual Pages

Free Software * Books

Source Code

Free Media

Linux

UUlib

NAME
SYNOPSIS
DESCRIPTION
EXPORTED CONSTANTS
EXPORTED FUNCTIONS
LARGE EXAMPLE DECODER
AUTHOR
SEE ALSO

NAME

Convert::UUlib − Perl interface to the uulib library (a.k.a. uudeview/uuenview).

SYNOPSIS

use Convert::UUlib ':all';
# read all the files named on the commandline and decode them
# into the CURRENT directory. See below for a longer example.
LoadFile $_ for @ARGV;
for (my $i = 0; my $uu = GetFileListItem $i; $i++) {
    if ($uu−>state & FILE_OK) {
      $uu−>decode;
      print $uu−>filename, "\n";
    }
}

DESCRIPTION

Read the file doc/library.pdf from the distribution for in-depth information about the C−library used in this interface, and the rest of this document and especially the non-trivial decoder program at the end.

EXPORTED CONSTANTS

Action code constants

  ACT_IDLE      we don't do anything
  ACT_SCANNING  scanning an input file
  ACT_DECODING  decoding into a temp file
  ACT_COPYING   copying temp to target
  ACT_ENCODING  encoding a file

Message severity levels

  MSG_MESSAGE   just a message, nothing important
  MSG_NOTE      something that should be noticed
  MSG_WARNING   important msg, processing continues
  MSG_ERROR     processing has been terminated
  MSG_FATAL     decoder cannot process further requests
  MSG_PANIC     recovery impossible, app must terminate

Options

  OPT_VERSION   version number MAJOR.MINORplPATCH (ro)
  OPT_FAST      assumes only one part per file
  OPT_DUMBNESS  switch off the program's intelligence
  OPT_BRACKPOL  give numbers in [] higher precendence
  OPT_VERBOSE   generate informative messages
  OPT_DESPERATE try to decode incomplete files
  OPT_IGNREPLY  ignore RE:plies (off by default)
  OPT_OVERWRITE whether it's OK to overwrite ex. files
  OPT_SAVEPATH  prefix to save−files on disk
  OPT_IGNMODE   ignore the original file mode
  OPT_DEBUG     print messages with FILE/LINE info
  OPT_ERRNO     get last error code for RET_IOERR (ro)
  OPT_PROGRESS  retrieve progress information
  OPT_USETEXT   handle text messages
  OPT_PREAMB    handle Mime preambles/epilogues
  OPT_TINYB64   detect short B64 outside of Mime
  OPT_ENCEXT    extension for single−part encoded files
  OPT_REMOVE    remove input files after decoding (dangerous)
  OPT_MOREMIME  strict MIME adherence
  OPT_DOTDOT    ".."−unescaping has not yet been done on input files
  OPT_RBUF      set default read I/O buffer size in bytes
  OPT_WBUF      set default write I/O buffer size in bytes
  OPT_AUTOCHECK automatically check file list after every loadfile

Result/Error codes

  RET_OK        everything went fine
  RET_IOERR     I/O Error − examine errno
  RET_NOMEM     not enough memory
  RET_ILLVAL    illegal value for operation
  RET_NODATA    decoder didn't find any data
  RET_NOEND     encoded data wasn't ended properly
  RET_UNSUP     unsupported function (encoding)
  RET_EXISTS    file exists (decoding)
  RET_CONT      continue −− special from ScanPart
  RET_CANCEL    operation canceled

File States

This code is zero, i.e. "false":
  UUFILE_READ   Read in, but not further processed
The following state codes are or'ed together:
  FILE_MISPART  Missing Part(s) detected
  FILE_NOBEGIN  No 'begin' found
  FILE_NOEND    No 'end' found
  FILE_NODATA   File does not contain valid uudata
  FILE_OK       All Parts found, ready to decode
  FILE_ERROR    Error while decoding
  FILE_DECODED  Successfully decoded
  FILE_TMPFILE  Temporary decoded file exists

Encoding types

  UU_ENCODED    UUencoded data
  B64_ENCODED   Mime−Base64 data
  XX_ENCODED    XXencoded data
  BH_ENCODED    Binhex encoded
  PT_ENCODED    Plain−Text encoded (MIME)
  QP_ENCODED    Quoted−Printable (MIME)
  YENC_ENCODED  yEnc encoded (non−MIME)

EXPORTED FUNCTIONS

Initializing and cleanup
Initialize is automatically called when the module is loaded and allocates quite a small amount of memory for todays machines ;) CleanUp releases that again.

On my machine, a fairly complete decode with DBI backend needs about 10MB RSS to decode 20000 files.
Initialize

Not normally necessary, (re−)initializes the library.

CleanUp

Not normally necessary, could be called at the end to release memory before starting a new decoding round.

Setting and querying options
$option = GetOption OPT_xxx
SetOption OPT_xxx, opt-value

See the "OPT_xxx" constants above to see which options exist.

Setting various callbacks
SetMsgCallback [callback−function]
SetBusyCallback [callback−function]
SetFileCallback [callback−function]
SetFNameFilter [callback−function]

Call the currently selected FNameFilter
$file = FNameFilter $file

Loading sourcefiles, optionally fuzzy merge and start decoding
($retval, $count) = LoadFile $fname, [$id, [$delflag, [$partno]]]

Load the given file and scan it for encoded contents. Optionally tag it with the given id, and if $delflag is true, delete the file after it is no longer necessary. If you are certain of the part number, you can specify it as the last argument.

A better (usually faster) way of doing this is using the "SetFNameFilter" functionality.

$retval = Smerge $pass

If you are desperate, try to call "Smerge" with increasing $pass values, beginning at 0, to try to merge parts that usually would not have been merged.

Most probably this will result in garbled files, so never do this by default, except:

If the "OPT_AUTOCHECK" option has been disabled (by default it is enabled) to speed up file loading, then you have to call "Smerge −1" after loading all files as an additional pre-pass (which is normally done by "LoadFile").

$item = GetFileListItem $item_number

Return the $item structure for the $item_number’th found file, or "undef" of no file with that number exists.

The first file has number 0, and the series has no holes, so you can iterate over all files by starting with zero and incrementing until you hit "undef".

Decoding files
$retval = $item−>rename($newname)

Change the ondisk filename where the decoded file will be saved.

$retval = $item−>decode_temp

Decode the file into a temporary location, use "$item−>infile" to retrieve the temporary filename.

$retval = $item−>remove_temp

Remove the temporarily decoded file again.

$retval = $item−>decode([$target_path])

Decode the file to it’s destination, or the given target path.

$retval = $item−>info(callback−function)

Querying (and setting) item attributes
$state = $item−>state
$mode = $item−>mode([newmode])
$uudet = $item−>uudet
$size = $item−>size
$filename = $item−>filename([newfilename})
$subfname = $item−>subfname
$mimeid = $item−>mimeid
$mimetype = $item−>mimetype
$binfile = $item−>binfile

Information about source parts
$parts = $item−>parts

Return information about all parts (source files) used to decode the file as a list of hashrefs with the following structure:

{
   partno   => <integer describing the part number, starting with 1>,
   # the following member sonly exist when they contain useful information
   sfname   => <local pathname of the file where this part is from>,
   filename => <the ondisk filename of the decoded file>,
   subfname => <used to cluster postings, possibly the posting filename>,
   subject  => <the subject of the posting/mail>,
   origin   => <the possible source (From) address>,
   mimetype => <the possible mimetype of the decoded file>,
   mimeid   => <the id part of the Content−Type>,
}

Usually you are interested mostly the "sfname" and possibly the "partno" and "filename" members.

Functions below not documented and not very well tested

  QuickDecode
  EncodeMulti
  EncodePartial
  EncodeToStream
  EncodeToFile
  E_PrepSingle
  E_PrepPartial

EXTENSION FUNCTIONS
Functions found in this module but not documented in the uulib documentation:
$msg = straction ACT_xxx

Return a human readable string representing the given action code.

$msg = strerror RET_xxx

Return a human readable string representing the given error code.

$str = strencoding xxx_ENCODED

Return the name of the encoding type as a string.

$str = strmsglevel MSG_xxx

Returns the message level as a string.

SetFileNameCallback $cb

Sets (or queries) the FileNameCallback, which is called whenever the decoding library can’t find a filename and wants to extract a filename from the subject line of a posting. The callback will be called with two arguments, the subject line and the current candidate for the filename. The latter argument can be "undef", which means that no filename could be found (and likely no one exists, so it is safe to also return "undef" in this case). If it doesn’t return anything (not even "undef"!), then nothing happens, so this is a no-op callback:

   sub cb {
      return ();
   }

If it returns "undef", then this indicates that no filename could be found. In all other cases, the return value is taken to be the filename.

This is a slightly more useful callback:

  sub cb {
     return unless $_[1]; # skip "Re:"−plies et al.
     my ($subject, $filename) = @_;
     # if we find some *.rar, take it
     return $1 if $subject =~ /(\w+\.rar)/;
     # otherwise just pass what we have
     return ();
  }

LARGE EXAMPLE DECODER

This is the file "example−decoder" from the distribution, put here instead of more thorough documentation.

   #!/usr/bin/perl
   # decode all the files in the directory uusrc/ and copy
   # the resulting files to uudst/
   use Convert::UUlib ':all';
   sub namefilter {
      my ($path) = @_;
      $path=~s/^.*[\/\\]//;
      $path
   }
   sub busycb {
      my ($action, $curfile, $partno, $numparts, $percent, $fsize) = @_;
      $_[0]=straction($action);
      print "busy_callback(", (join ",",@_), ")\n";
      0
   }
   SetOption OPT_RBUF, 128*1024;
   SetOption OPT_WBUF, 1024*1024;
   SetOption OPT_IGNMODE, 1;
   SetOption OPT_IGNMODE, 1;
   SetOption OPT_VERBOSE, 1;
   # show the three ways you can set callback functions. I normally
   # prefer the one with the sub inplace.
   SetFNameFilter \&namefilter;
   SetBusyCallback "busycb", 333;
   SetMsgCallback sub {
      my ($msg, $level) = @_;
      print uc strmsglevel $_[1], ": $msg\n";
   };
   # the following non−trivial FileNameCallback takes care
   # of some subject lines not detected properly by uulib:
   SetFileNameCallback sub {
      return unless $_[1]; # skip "Re:"−plies et al.
      local $_ = $_[0];
      # the following rules are rather effective on some newsgroups,
      # like alt.binaries.games.anime, where non−mime, uuencoded data
      # is very common
      # if we find some *.rar, take it as the filename
      return $1 if /(\S{3,}\.(?:[rstuvwxyz]\d\d|rar))\s/i;
      # one common subject format
      return $1 if /− "(.{2,}?\..+?)" (?:yenc )?$\d+\/\d+$/i;
      # − filename.par (04/55)
      return $1 if /− "?(\S{3,}\.\S+?)"? (?:yenc )?$\d+\/\d+$/i;
      # − (xxx) No. 1 sayuri81.jpg 756565 bytes
      # − (20 files) No.17 Roseanne.jpg [2/2]
      return $1 if /No\.[ 0−9]+ (\S+\....) (?:\d+ bytes )?\[/;
      # try to detect some common forms of filenames
      return $1 if /([a−z0−9_\−+.]{3,}\.[a−z]{3,4}(?:.\d+))/i;
      # otherwise just pass what we have
      ()
   };
   # now read all files in the directory uusrc/*
   for(<uusrc/*>) {
      my ($retval, $count) = LoadFile ($_, $_, 1);
      print "file($_), status(", strerror $retval, ") parts($count)\n";
   }
   SetOption OPT_SAVEPATH, "uudst/";
   # now wade through all files and their source parts
   $i = 0;
   while ($uu = GetFileListItem $i) {
      $i++;
      print "file nr. $i";
      print " state ", $uu−>state;
      print " mode ", $uu−>mode;
      print " uudet ", strencoding $uu−>uudet;
      print " size ", $uu−>size;
      print " filename ", $uu−>filename;
      print " subfname ", $uu−>subfname;
      print " mimeid ", $uu−>mimeid;
      print " mimetype ", $uu−>mimetype;
      print "\n";
      # print additional info about all parts
      for ($uu−>parts) {
         while (my ($k, $v) = each %$_) {
            print "$k > $v, ";
         }
         print "\n";
      }
      print $uu−>filename;
      $uu−>remove_temp;
      if (my $err = $uu−>decode ()) {
         print ", ", strerror $err, "\n";
      } else {
         print ", saved as uudst/", $uu−>filename, "\n";
      }
   }
   print "cleanup...\n";
   CleanUp;

AUTHOR

Marc Lehmann <schmorp@schmorp.de>, the original uulib library was written by Frank Pilhofer <fp@informatik.uni−frankfurt.de>, and later heavily bugfixed by Marc Lehmann.

Opportunity

Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.

Free Software

Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.

Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.

Free Books

The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.

Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.

Education

Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.

Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.