File::Copy
File::Copy
NAMESYNOPSIS
DESCRIPTION
RETURN
AUTHOR
NAME
File::Copy − Copy files or filehandles
SYNOPSIS
use File::Copy;
copy("file1","file2") or die "Copy failed: $!";
copy("Copy.pm",\*STDOUT);
move("/dev1/fileA","/dev2/fileB");
use File::Copy "cp";
$n = FileHandle−>new("/a/file","r");
cp($n,"x");
DESCRIPTION
The File::Copy
module provides two basic functions,
"copy" and "move",
which are useful for getting the contents of a file from one
place to another.
copy
The "copy" function takes two parameters: a file to copy from and a file to copy to. Either argument may be a string, a FileHandle reference or a FileHandle glob. Obviously, if the first argument is a filehandle of some sort, it will be read from, and if it is a file name it will be opened for reading. Likewise, the second argument will be written to (and created if need be). Trying to copy a file on top of itself is a fatal error.
If the destination (second argument) already exists and is a directory, and the source (first argument) is not a filehandle, then the source file will be copied into the directory specified by the destination, using the same base name as the source file. It’s a failure to have a filehandle as the source when the destination is a directory.
Note that passing in files as handles instead of names may lead to loss of information on some operating systems; it is recommended that you use file names whenever possible. Files are opened in binary mode where applicable. To get a consistent behaviour when copying from a filehandle to a file, use "binmode" on the filehandle.
An optional third parameter can be used to specify the buffer size used for copying. This is the number of bytes from the first file, that will be held in memory at any given time, before being written to the second file. The default buffer size depends upon the file, but will generally be the whole file (up to 2MB), or 1k for filehandles that do not reference files (eg. sockets).
You may use the syntax "use File::Copy "cp"" to get at the "cp" alias for this function. The syntax is exactly the same. The behavior is nearly the same as well: as of version 2.15, <cp> will preserve the source file’s permission bits like the shell utility cp(1) would do, while "copy" uses the default permissions for the target file (which may depend on the process’ "umask", file ownership, inherited ACLs, etc.). If an error occurs in setting permissions, "cp" will return 0, regardless of whether the file was successfully copied.
move
The "move" function also takes two parameters: the current name and the intended name of the file to be moved. If the destination already exists and is a directory, and the source is not a directory, then the source file will be renamed into the directory specified by the destination.
If possible, move() will simply rename the file. Otherwise, it copies the file to the new location and deletes the original. If an error occurs during this copy-and-delete process, you may be left with a (possibly partial) copy of the file under the destination name.
You may use the "mv" alias for this function in the same way that you may use the <cp> alias for "copy".
syscopy
File::Copy also provides the "syscopy" routine, which copies the file specified in the first parameter to the file specified in the second parameter, preserving OS-specific attributes and file structure. For Unix systems, this is equivalent to the simple "copy" routine, which doesn’t preserve OS-specific attributes. For VMS systems, this calls the "rmscopy" routine (see below). For OS/2 systems, this calls the "syscopy" XSUB directly. For Win32 systems, this calls "Win32::CopyFile".
Special behaviour if "syscopy" is defined ( OS/2 , VMS and Win32):
If both arguments to "copy" are not file handles, then "copy" will perform a "system copy" of the input file to a new output file, in order to preserve file attributes, indexed file structure, etc. The buffer size parameter is ignored. If either argument to "copy" is a handle to an opened file, then data is copied using Perl operators, and no effort is made to preserve file attributes or record structure.
The system copy routine may also be called directly under VMS and OS/2 as "File::Copy::syscopy" (or under VMS as "File::Copy::rmscopy", which is the routine that does the actual work for syscopy).
rmscopy($from,$to[,$date_flag])
The first and second arguments may be strings, typeglobs, typeglob references, or objects inheriting from IO::Handle; they are used in all cases to obtain the filespec of the input and output files, respectively. The name and type of the input file are used as defaults for the output file, if necessary.
A new version of the output file is always created, which inherits the structure and RMS attributes of the input file, except for owner and protections (and possibly timestamps; see below). All data from the input file is copied to the output file; if either of the first two parameters to "rmscopy" is a file handle, its position is unchanged. (Note that this means a file handle pointing to the output file will be associated with an old version of that file after "rmscopy" returns, not the newly created version.)
The third parameter is an integer flag, which tells "rmscopy" how to handle timestamps. If it is < 0, none of the input file’s timestamps are propagated to the output file. If it is > 0, then it is interpreted as a bitmask: if bit 0 (the LSB ) is set, then timestamps other than the revision date are propagated; if bit 1 is set, the revision date is propagated. If the third parameter to "rmscopy" is 0, then it behaves much like the DCL COPY command: if the name or type of the output file was explicitly specified, then no timestamps are propagated, but if they were taken implicitly from the input filespec, then all timestamps other than the revision date are propagated. If this parameter is not supplied, it defaults to 0.
Like "copy", "rmscopy" returns 1 on success. If an error occurs, it sets $!, deletes the output file, and returns 0.
RETURN
All functions return 1 on success, 0 on failure. $! will be set if an error was encountered.
AUTHOR
File::Copy was written by Aaron Sherman <ajs@ajs.com> in 1995, and updated by Charles Bailey <bailey@newman.upenn.edu> in 1996.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
