Tcl_GetReturnOptions, Tcl_SetReturnOptions, Tcl_AddErrorInfo, Tcl_AppendObjToErrorInfo, Tcl_AddObjErrorInfo, Tcl_SetObjErrorCode, Tcl_SetErrorCode, Tcl_SetErrorCodeVA, Tcl_PosixError, Tcl_LogCommandInfo − retrieve or record information about errors and other return options


#include <tcl.h>

Tcl_Obj * │
(interp, code) │

int │
(interp, options) │

Tcl_AddErrorInfo(interp, message)

Tcl_AppendObjToErrorInfo(interp, objPtr) │

Tcl_AddObjErrorInfo(interp, message, length)

Tcl_SetObjErrorCode(interp, errorObjPtr)

Tcl_SetErrorCode(interp, element, element, ... (char *) NULL)

Tcl_SetErrorCodeVA(interp, argList)

const char *

(interp, script, command, commandLength)


Tcl_Interp *interp (in)

Interpreter in which to record information.

int code

The code returned from script evaluation.

Tcl_Obj *options

A dictionary of return options.

char *message (in)

For Tcl_AddErrorInfo, this is a conventional C string to append to the −errorinfo return option. For Tcl_AddObjErrorInfo, this points to the first byte of an array of length bytes containing a string to append to the −errorinfo return option. This byte array may contain embedded null bytes unless length is negative. │

Tcl_Obj *objPtr (in) │

A message to be appended to the │ −errorinfo return option in the │ form of a Tcl_Obj value.

int length (in)

The number of bytes to copy from message when appending to the −errorinfo return option. If negative, all bytes up to the first null byte are used.

Tcl_Obj *errorObjPtr (in)

The −errorcode return option will be set to this value.

char *element (in)

String to record as one element of the −errorcode return option. Last element argument must be NULL.

va_list argList (in)

An argument list which must have been initialized using va_start, and cleared using va_end.

const char *script (in)

Pointer to first character in script containing command (must be <= command)

const char *command (in)

Pointer to first character in command that generated the error

int commandLength (in)

Number of bytes in command; -1 means use all bytes up to first null byte



The Tcl_SetReturnOptions and Tcl_GetReturnOptions routines expose the │ same capabilities as the return and catch commands, respectively, in │ the form of a C interface. │

Tcl_GetReturnOptions retrieves the dictionary of return options from an │ interpreter following a script evaluation. Routines such as Tcl_Eval │ are called to evaluate a script in an interpreter. These routines │ return an integer completion code. These routines also leave in the │ interpreter both a result and a dictionary of return options generated │ by script evaluation. Just as Tcl_GetObjResult retrieves the result, │ Tcl_GetReturnOptions retrieves the dictionary of return options. The │ integer completion code should be passed as the code argument to │ Tcl_GetReturnOptions so that all required options will be present in │ the dictionary. Specifically, a code value of TCL_ERROR will ensure │ that entries for the keys −errorinfo, −errorcode, and −errorline will │ appear in the dictionary. Also, the entries for the keys −code and │ −level will be adjusted if necessary to agree with the value of code. │ The (Tcl_Obj *) returned by Tcl_GetReturnOptions points to an unshared │ Tcl_Obj with reference count of zero. The dictionary may be written │ to, either adding, removing, or overwriting any entries in it, with the │ need to check for a shared object. │

A typical usage for Tcl_GetReturnOptions is to retrieve the stack trace │ when script evaluation returns TCL_ERROR, like so: │

int code = Tcl_Eval(interp, script); │
if (code == TCL_ERROR) { │
Tcl_Obj *options = Tcl_GetReturnOptions(interp, code); │
Tcl_Obj *key = Tcl_NewStringObj("-errorinfo", -1); │
Tcl_Obj *stackTrace; │
Tcl_IncrRefCount(key); │
Tcl_DictObjGet(NULL, options, key, &stackTrace); │
Tcl_DecrRefCount(key); │
/* Do something with stackTrace */ │
} │

Tcl_SetReturnOptions sets the return options of interp to be options. │ If options contains any invalid value for any key, TCL_ERROR will be │ returned, and the interp result will be set to an appropriate error │ message. Otherwise, a completion code in agreement with the −code and │ −level keys in options will be returned. │

As an example, Tcl’s return command itself could be implemented in │ terms of Tcl_SetReturnOptions like so: │

if ((objc % 2) == 0) { /* explicit result argument */ │
objc--; │
Tcl_SetObjResult(interp, objv[objc]); │
} │
return Tcl_SetReturnOptions(interp, Tcl_NewListObj(objc-1, objv+1)); │

(It is not really implemented that way. Internal access privileges │ allow for a more efficient alternative that meshes better with the │ bytecode compiler.) │

Note that a newly created Tcl_Obj may be passed in as the options │ argument without the need to tend to any reference counting. This is │ analogous to Tcl_SetObjResult. │

While Tcl_SetReturnOptions provides a general interface to set any │ collection of return options, there are a handful of return options │ that are very frequently used. Most notably the −errorinfo and │ −errorcode return options should be set properly when the command │ procedure of a command returns TCL_ERROR. Tcl provides several simpler │ interfaces to more directly set these return options.

The −errorinfo option holds a stack trace of the operations that were in progress when an error occurred, and is intended to be human-readable. The −errorcode option holds a list of items that are intended to be machine-readable. The first item in the −errorcode value identifies the class of error that occurred (e.g. POSIX means an error occurred in a POSIX system call) and additional elements hold additional pieces of information that depend on the class. See the tclvars manual entry for details on the various formats for the −errorcode option used by Tcl’s built-in commands.

The −errorinfo option value is gradually built up as an error unwinds through the nested operations. Each time an error code is returned to Tcl_Eval, or any of the routines that performs script evaluation, the procedure Tcl_AddErrorInfo is called to add additional text to the −errorinfo value describing the command that was being executed when the error occurred. By the time the error has been passed all the way back to the application, it will contain a complete trace of the activity in progress when the error occurred.

It is sometimes useful to add additional information to the −errorinfo value beyond what can be supplied automatically by the script evaluation routines. Tcl_AddErrorInfo may be used for this purpose: its message argument is an additional string to be appended to the −errorinfo option. For example, when an error arises during the source command, the procedure Tcl_AddErrorInfo is called to record the name of the file being processed and the line number on which the error occurred. Likewise, when an error arises during evaluation of a Tcl procedures, the procedure name and line number within the procedure are recorded, and so on. The best time to call Tcl_AddErrorInfo is just after a script evaluation routine has returned TCL_ERROR. The value of the −errorline return option (retrieved via a call to Tcl_GetReturnOptions) often makes up a useful part of the message passed to Tcl_AddErrorInfo.

Tcl_AppendObjToErrorInfo is an alternative interface to the same │ functionality as Tcl_AddErrorInfo. Tcl_AppendObjToErrorInfo is called │ when the string value to be appended to the −errorinfo option is │ available as a Tcl_Obj instead of as a char array.

Tcl_AddObjErrorInfo is nearly identical to Tcl_AddErrorInfo, except that it has an additional length argument. This allows the message string to contain embedded null bytes. This is essentially never a good idea. If the message needs to contain the null character U+0000, Tcl’s usual internal encoding rules should be used to avoid the need for a null byte. If the Tcl_AddObjErrorInfo interface is used at all, it should be with a negative length value.

The procedure Tcl_SetObjErrorCode is used to set the −errorcode return option to the list object errorObjPtr built up by the caller. Tcl_SetObjErrorCode is typically invoked just before returning an error. If an error is returned without calling Tcl_SetObjErrorCode or Tcl_SetErrorCode the Tcl interpreter automatically sets the −errorcode return option to NONE.

The procedure Tcl_SetErrorCode is also used to set the −errorcode return option. However, it takes one or more strings to record instead of an object. Otherwise, it is similar to Tcl_SetObjErrorCode in behavior.

Tcl_SetErrorCodeVA is the same as Tcl_SetErrorCode except that instead of taking a variable number of arguments it takes an argument list.

Tcl_PosixError sets the −errorcode variable after an error in a POSIX kernel call. It reads the value of the errno C variable and calls Tcl_SetErrorCode to set the −errorcode return option in the POSIX format. The caller must previously have called Tcl_SetErrno to set errno; this is necessary on some platforms (e.g. Windows) where Tcl is linked into an application as a shared library, or when the error occurs in a dynamically loaded extension. See the manual entry for Tcl_SetErrno for more information.

Tcl_PosixError returns a human-readable diagnostic message for the error (this is the same value that will appear as the third element in the −errorcode value). It may be convenient to include this string as part of the error message returned to the application in the interpreter’s result.

Tcl_LogCommandInfo is invoked after an error occurs in an interpreter. It adds information about the command that was being executed when the error occurred to the −errorinfo value, and the line number stored internally in the interpreter is set.

In older releases of Tcl, there was no Tcl_GetReturnOptions routine. In its place, the global Tcl variables errorInfo and errorCode were the only place to retrieve the error information. Much existing code written for older Tcl releases still access this information via those global variables.

It is important to realize that while reading from those global variables remains a supported way to access these return option values, it is important not to assume that writing to those global variables will properly set the corresponding return options. It has long been emphasized in this manual page that it is important to call the procedures described here rather than setting errorInfo or errorCode directly with Tcl_ObjSetVar2.

If the procedure Tcl_ResetResult is called, it clears all of the state of the interpreter associated with script evaluation, including the entire return options dictionary. In particular, the −errorinfo and −errorcode options are reset. If an error had occurred, the Tcl_ResetResult call will clear the error state to make it appear as if no error had occurred after all. The global variables errorInfo and errorCode are not modified by Tcl_ResetResult so they continue to hold a record of information about the most recent error seen in an interpreter.


Tcl_DecrRefCount, Tcl_IncrRefCount, Tcl_Interp, Tcl_ResetResult, Tcl_SetErrno


error, object, object result, stack, trace, variable

More Linux Commands

idn.conf.5 - idn.conf(5) - configuration files for idnkit library........
idn.conf and .idnrc are configuration files for idnkit library which is a toolkit for handling internationalized domain names. idnkit library tries to load the

eview(1) - easy Vim, edit a file with Vim and setup for mode
eVim starts Vim and sets options to make it behave like a modeless editor. This is still Vim but used as a point-and-click editor. This feels a lot like using N

tcpdump(1) - dump traffic on a network - Linux manual page
Tcpdump prints out a description of the contents of packets on a network interface that match the boolean expression. It can also be run with the -w flag, which

nss-myhostname(8) Provide hostname resolution for the locall
nss-myhostname is a plugin for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing hostname resolution for the locally config

lvmdiskscan(8) - scan for all devices visible to LVM2.......
lvmdiskscan scans all SCSI, (E)IDE disks, multiple devices and a bunch of other block devices in the system looking for LVM physical volumes. The size reported

XQueryPointer(3) - get pointer coordinates - Linux man page
The XQueryPointer function returns the root window the pointer is logically on and the pointer coordinates relative to the root windows origin. If XQueryPointer

menu_value(3menu) - set and get menu item values (Man Page)
If you turn off the menu option O_ONEVALUE (e.g., with set_menu_opts or menu_opts_off; see opts(3MENU)), the menu becomes multi-valued; that is, more than one i

log2(3) - base-2 logarithmic function - Linux manual page...
The log2() function returns the base 2 logarithm of x. RETURN VALUE On success, these functions return the base 2 logarithm of x. For special cases, including w

agetty(8) - alternative Linux getty - Linux manual page.....
agetty opens a tty port, prompts for a login name and invokes the /bin/login command. It is normally invoked by init(8). agetty has several non-standard feature

xinetd.conf(5) - Extended Internet Services Daemon configura
xinetd.conf is the configuration file that determines the services provided by xinetd. Any line whose first non-white-space character is a # is considered a com

if_indextoname(3) mappings between network interface names a
The if_nametoindex() function returns the index of the network interface corresponding to the name ifname. The if_indextoname() function returns the name of the

rmid(1) - The Java RMI Activation System Daemon (Man Page)
The rmid tool starts the activation system daemon. The activation system daemon must be started before activatable objects can be either registered with the act

We can't live, work or learn in freedom unless the software we use is free.