Threads


HOME

Threads

NAME
SYNOPSIS
ARGUMENTS
INTRODUCTION
DESCRIPTION
SCRIPT-LEVEL ACCESS TO THREADS
SEE ALSO
KEYWORDS

___________________________

NAME

Tcl_ConditionNotify, Tcl_ConditionWait, Tcl_ConditionFinalize, Tcl_GetThreadData, Tcl_MutexLock, Tcl_MutexUnlock, Tcl_MutexFinalize, Tcl_CreateThread, Tcl_JoinThread − Tcl thread support

SYNOPSIS

#include <tcl.h>

void
Tcl_ConditionNotify
(condPtr)

void
Tcl_ConditionWait
(condPtr, mutexPtr, timePtr)

void
Tcl_ConditionFinalize
(condPtr)

Void *
Tcl_GetThreadData
(keyPtr, size)

void
Tcl_MutexLock
(mutexPtr)

void
Tcl_MutexUnlock
(mutexPtr)

void
Tcl_MutexFinalize
(mutexPtr)

int
Tcl_CreateThread
(idPtr, threadProc, clientData, stackSize, flags)

int
Tcl_JoinThread
(id, result)

ARGUMENTS

Tcl_Condition *condPtr (in)

A condition variable, which must be associated with a mutex lock.

Tcl_Mutex *mutexPtr (in)

A mutex lock.

Tcl_Time *timePtr (in)

A time limit on the condition wait. NULL to wait forever. Note that a polling value of 0 seconds does not make much sense.

Tcl_ThreadDataKey *keyPtr (in)

This identifies a block of thread local storage. The key should be static and process-wide, yet each thread will end up associating a different block of storage with this key.

int *size (in)

The size of the thread local storage block. This amount of data is allocated and initialized to zero the first time each thread calls Tcl_GetThreadData.

Tcl_ThreadId *idPtr (out)

The referred storage will contain the id of the newly created thread as returned by the operating system.

Tcl_ThreadId id (in)

Id of the thread waited upon.

Tcl_ThreadCreateProc threadProc (in)

This procedure will act as the main() of the newly created thread. The specified clientData will be its sole argument.

ClientData clientData (in)

Arbitrary information. Passed as sole argument to the threadProc.

int stackSize (in)

The size of the stack given to the new thread.

int flags (in)

Bitmask containing flags allowing the caller to modify behaviour of the new thread.

int *result (out)

The referred storage is used to place the exit code of the thread waited upon into it.

______________

INTRODUCTION

Beginning with the 8.1 release, the Tcl core is thread safe, which allows you to incorporate Tcl into multithreaded applications without customizing the Tcl core. To enable Tcl multithreading support, you must include the −−enable-threads option to configure when you configure and compile your Tcl core.

An important constraint of the Tcl threads implementation is that only the thread that created a Tcl interpreter can use that interpreter. In other words, multiple threads can not access the same Tcl interpreter. (However, a single thread can safely create and use multiple interpreters.)

DESCRIPTION

Tcl provides Tcl_CreateThread for creating threads. The caller can determine the size of the stack given to the new thread and modify the behaviour through the supplied flags. The value TCL_THREAD_STACK_DEFAULT for the stackSize indicates that the default size as specified by the operating system is to be used for the new thread. As for the flags, currently only the values TCL_THREAD_NOFLAGS and TCL_THREAD_JOINABLE are defined. The first of them invokes the default behaviour with no specialties. Using the second value marks the new thread as joinable. This means that another thread can wait for the such marked thread to exit and join it.

Restrictions: On some UNIX systems the pthread-library does not contain the functionality to specify the stack size of a thread. The specified value for the stack size is ignored on these systems. Windows currently does not support joinable threads. This flag value is therefore ignored on this platform.

Tcl provides the Tcl_ExitThread and Tcl_FinalizeThread functions for terminating threads and invoking optional per-thread exit handlers. See the Tcl_Exit page for more information on these procedures.

The Tcl_JoinThread function is provided to allow threads to wait upon the exit of another thread, which must have been marked as joinable through usage of the TCL_THREAD_JOINABLE-flag during its creation via Tcl_CreateThread.

Trying to wait for the exit of a non-joinable thread or a thread which is already waited upon will result in an error. Waiting for a joinable thread which already exited is possible, the system will retain the necessary information until after the call to Tcl_JoinThread. This means that not calling Tcl_JoinThread for a joinable thread will cause a memory leak.

The Tcl_GetThreadData call returns a pointer to a block of thread-private data. Its argument is a key that is shared by all threads and a size for the block of storage. The storage is automatically allocated and initialized to all zeros the first time each thread asks for it. The storage is automatically deallocated by Tcl_FinalizeThread.

SYNCHRONIZATION AND COMMUNICATION
Tcl provides Tcl_ThreadQueueEvent and Tcl_ThreadAlert for handling event queuing in multithreaded applications. See the Notifier manual page for more information on these procedures.

A mutex is a lock that is used to serialize all threads through a piece of code by calling Tcl_MutexLock and Tcl_MutexUnlock. If one thread holds a mutex, any other thread calling Tcl_MutexLock will block until Tcl_MutexUnlock is called. A mutex can be destroyed after its use by calling Tcl_MutexFinalize. The result of locking a mutex twice from the same thread is undefined. On some platforms it will result in a deadlock. The Tcl_MutexLock, Tcl_MutexUnlock and Tcl_MutexFinalize procedures are defined as empty macros if not compiling with threads enabled. For declaration of mutexes the TCL_DECLARE_MUTEX macro should be used. This macro assures correct mutex handling even when the core is compiled without threads enabled.

A condition variable is used as a signaling mechanism: a thread can lock a mutex and then wait on a condition variable with Tcl_ConditionWait. This atomically releases the mutex lock and blocks the waiting thread until another thread calls Tcl_ConditionNotify. The caller of Tcl_ConditionNotify should have the associated mutex held by previously calling Tcl_MutexLock, but this is not enforced. Notifying the condition variable unblocks all threads waiting on the condition variable, but they do not proceed until the mutex is released with Tcl_MutexUnlock. The implementation of Tcl_ConditionWait automatically locks the mutex before returning.

The caller of Tcl_ConditionWait should be prepared for spurious notifications by calling Tcl_ConditionWait within a while loop that tests some invariant.

A condition variable can be destroyed after its use by calling Tcl_ConditionFinalize.

The Tcl_ConditionNotify, Tcl_ConditionWait and Tcl_ConditionFinalize procedures are defined as empty macros if not compiling with threads enabled.

INITIALIZATION
All of these synchronization objects are self-initializing. They are implemented as opaque pointers that should be NULL upon first use. The mutexes and condition variables are either cleaned up by process exit handlers (if living that long) or explicitly by calls to Tcl_MutexFinalize or Tcl_ConditionFinalize. Thread local storage is reclaimed during Tcl_FinalizeThread.

SCRIPT-LEVEL ACCESS TO THREADS

Tcl provides no built-in commands for scripts to use to create, manage, │ or join threads, nor any script-level access to mutex or condition │ variables. It provides such facilities only via C interfaces, and │ leaves it up to packages to expose these matters to the script level. │ One such package is the Thread package.

SEE ALSO

Tcl_GetCurrentThread(3), Tcl_ThreadQueueEvent(3), Tcl_ThreadAlert(3), Tcl_ExitThread(3), Tcl_FinalizeThread(3), Tcl_CreateThreadExitHandler(3), Tcl_DeleteThreadExitHandler(3), Thread

KEYWORDS

thread, mutex, condition variable, thread local storage






Opportunity


Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.





Free Software


Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.


Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.





Free Books


The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.


Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.





Education


Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.


Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.