aria_chk − Aria table−maintenance utility
aria_chk [OPTIONS] tables[.MAI]
Describe, check and repair of Aria tables. Used without options all tables on the command will be checked for errors
Global
options
−#, −−debug=...
Output debug log. Often this is ’d:t:o,filename’.
−H, −−HELP
Print all argument options sorted alphabetically.
−?, −−help
Print all options by groups
−−datadir=path
Path for control file (and logs if −−logdir not used)
−−logdir=path
Path for log files
−−ignore−control−file
Don’t open the control file. Only use this if you are sure the tables are not in use by another program!
−−require−control−file
Abort if we can’t find/read the maria_log_control file
−s, −−silent
Only print errors. One can use two −s to make maria_chk very silent.
−t, −−tmpdir=path
Path for temporary files. Multiple paths can be specified, separated by colon (:), they will be used in a round−robin fashion.
−v, −−verbose
Print more information. This can be used with −−description and −−check. Use many −v for more verbosity.
−V, −−version
Print version and exit.
−w, −−wait
Wait if table is locked.
Check
options (check is the default action for aria_chk)
−c, −−check
Check table for errors.
−e, −−extend−check
Check the table VERY throughly. Only use this in extreme cases as aria_chk should normally be able to find out if the table is ok even without this switch.
−F, −−fast
Check only tables that haven’t been closed properly.
−C, −−check−only−changed
Check only tables that have changed since last check.
−f, −−force
Restart with ’−r’ if there are any errors in the table. States will be updated as with ’−−update−state’.
−i, −−information
Print statistics information about table that is checked.
−m, −−medium−check
Faster than extend−check, but only finds 99.99% of all errors. Should be good enough for most cases.
−T, −−read−only
Don’t mark table as checked.
−U, −−update−state
Mark tables as crashed if any errors were found and clean if check didn’t find any errors but table was marked as ’not clean’ before. This allows one to get rid of warnings like ’table not properly closed’. If table was updated, update also the timestamp for when the check was made. This option is on by default! Use −−skip−update−state to disable.
−−warning−for−wrong−transaction−id |
Give a warning if we find a transaction id in the table that is bigger than what exists in the control file. Use −−skip−... to disable warning
Recover (repair)/ options (When using ’--recover’ or ’--safe-recover’)
−B, −−backup
Make a backup of the .MAD file as ’filename−time.BAK’.
−−correct−checksum
Correct checksum information for table.
−D, −−data−file−length=#
Max length of data file (when recreating data file when it’s full).
−e, −−extend−check
Try to recover every possible row from the data file Normally this will also find a lot of garbage rows; Don’t use this option if you are not totally desperate.
−f, −−force
Overwrite old temporary files.
−k, −−keys−used=#
Tell Aria to update only some specific keys. # is a bit mask of which keys to use. This can be used to get faster inserts.
−−max−record−length=#
Skip rows bigger than this if aria_chk can’t allocate memory to hold it.
−r, −−recover
Can fix almost anything except unique keys that aren’t unique.
−n, −−sort−recover
Forces recovering with sorting even if the temporary file would be very big.
−p, −−parallel−recover
Uses the same technique as ’−r’ and ’−n’, but creates all the keys in parallel, in different threads.
−o, −−safe−recover
Uses old recovery method; Slower than ’−r’ but can handle a couple of cases where ’−r’ reports that it can’t fix the data file.
−−transaction−log
Log repair command to transaction log. This is needed if one wants to use the aria_read_log to repeat the repair
−−character−sets−dir=...
Directory where character sets are.
−−set−collation=name
Change the collation used by the index.
−q, −−quick
Faster repair by not modifying the data file. One can give a second ’−q’ to force aria_chk to modify the original datafile in case of duplicate keys. NOTE: Tables where the data file is currupted can’t be fixed with this option.
−u, −−unpack
Unpack file packed with ariapack.
Other
actions
−a, −−analyze
Analyze distribution of keys. Will make some joins in MariaDB faster. You can check the calculated distribution by using ’−−description −−verbose table_name’.
−−stats_method=name
Specifies how index statistics collection code should treat NULLs. Possible values of name are "nulls_unequal" (default for 4.1/5.0), "nulls_equal" (emulate 4.0), and "nulls_ignored".
−d, −−description
Prints some information about table.
−A, −−set−auto−increment[=value]
Force auto_increment to start at this or higher value If no value is given, then sets the next auto_increment value to the highest used value for the auto key + 1.
−S, −−sort−index
Sort index blocks. This speeds up ’read−next’ in applications.
−R, −−sort−records=#
Sort records according to an index. This makes your data much more localized and may speed up things (It may be VERY slow to do a sort the first time!).
−b, −−block−search=#
Find a record, a block at given offset belongs to.
−z, −−zerofill
Fill empty space in data and index files with zeroes. This makes the data file movable between different servers.
−−zerofill−keep−lsn
Like −−zerofill but does not zero out LSN of data/index pages.
Variables
−−page_buffer_size=#
Size of page buffer. Used by −−safe−repair
−−read_buffer_size=#
Read buffer size for sequential reads during scanning
−−sort_buffer_size=#
Size of sort buffer. Used by −−recover
−−sort_key_blocks=#
Internal buffer for sorting keys; Don’t touch.
−−write_buffer_size=#
Write buffer size for sequential writes during repair
Default options are read from the following files in the given order: /etc/my.cnf /etc/mysql/my.cnf ~/.my.cnf
The following groups are read: aria_chk
The following
options may be given as the first argument:
−−print−defaults
Print the program argument list and exit.
−−no−defaults
Don’t read default options from any option file.
−−defaults−file=#
Only read default options from the given file #.
−−defaults−extra−file=#
Read this file after the global files are read.
For more information, please refer to the MariaDB Knowledge Base, which is available online at http://mariadb.com/kb/
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.