clamd.conf(5)
NAME
clamd.conf - Configuration file for Clam AntiVirus Daemon
DESCRIPTION
clamd.conf configures the Clam AntiVirus daemon, clamd(8).
FILE FORMAT
The file consists of comments and options with arguments. Each line
which starts with a hash (#) symbol is ignored by the parser. Options
and arguments are case sensitive and of the form Option Argument. The
arguments are of the following types:
BOOL Boolean value (yes/no or true/false or 1/0).
STRING String without blank characters.
SIZE Size in bytes. You can use 'M' or 'm' modifiers for megabytes
and 'K' or 'k' for kilobytes. To specify the size in bytes just
don't use modifiers.
NUMBER Unsigned integer.
DIRECTIVES
When some option is not used (commented out or not included in the
configuration file at all) clamd takes a default action.
Example
If this option is set clamd will not run.
LogFile STRING
Save all reports to a log file.
Default: disabled
LogFileUnlock BOOL
By default the log file is locked for writing and only a single
daemon process can write to it. This option disables the lock.
Default: no
LogFileMaxSize SIZE
Maximum size of the log file.
Value of 0 disables the limit.
Default: 1048576
LogTime BOOL
Log time for each message.
Default: no
LogClean BOOL
Log all clean files.
Useful in debugging but drastically increases the log size.
Default: no
LogSyslog BOOL
Use the system logger (can work together with LogFile).
Default: no
LogFacility STRING
Type of syslog messages
Please refer to 'man syslog' for facility names.
Default: LOG_LOCAL6
LogVerbose BOOL
Enable verbose logging.
Default: no
LogRotate BOOL
Rotate log file. Requires LogFileMaxSize option set prior to
this option.
Default: no
ExtendedDetectionInfo BOOL
Log additional information about the infected file, such as its
size and hash, together with the virus name.
Default: no
PidFile STRING
Save the process identifier of a listening daemon (main thread)
to a specified file.
Default: disabled
TemporaryDirectory STRING
This option allows you to change the default temporary
directory.
Default: system specific (usually /tmp or /var/tmp).
DatabaseDirectory STRING
This option allows you to change the default database directory.
If you enable it, please make sure it points to the same
directory in both clamd and freshclam.
Default: defined at configuration (/usr/local/share/clamav)
OfficialDatabaseOnly BOOL
Only load the official signatures published by the ClamAV
project.
Default: no
LocalSocket STRING
Path to a local (Unix) socket the daemon will listen on.
Default: disabled
LocalSocketGroup STRING
Sets the group ownership on the unix socket.
Default: the primary group of the user running clamd
LocalSocketMode STRING
Sets the permissions on the unix socket to the specified mode.
Default: socket is world readable and writable
FixStaleSocket BOOL
Remove stale socket after unclean shutdown.
Default: yes
TCPSocket NUMBER
TCP port number the daemon will listen on.
Default: disabled
TCPAddr STRING
By default clamd binds to INADDR_ANY.
This option allows you to restrict the TCP address and provide
some degree of protection from the outside world. This option
can be specified multiple times in order to listen on multiple
IPs. IPv6 is now supported.
Default: disabled
MaxConnectionQueueLength NUMBER
Maximum length the queue of pending connections may grow to.
Default: 200
StreamMaxLength SIZE
Close the STREAM session when the data size limit is exceeded.
The value should match your MTA's limit for the maximum
attachment size.
Default: 25M
StreamMinPort NUMBER
The STREAM command uses an FTP-like protocol.
This option sets the lower boundary for the port range.
Default: 1024
StreamMaxPort NUMBER
This option sets the upper boundary for the port range.
Default: 2048
MaxThreads NUMBER
Maximum number of threads running at the same time.
Default: 10
ReadTimeout NUMBER
This option specifies the time (in seconds) after which clamd
should timeout if a client doesn't provide any data.
Default: 120
CommandReadTimeout NUMBER
This option specifies the time (in seconds) after which clamd
should timeout if a client doesn't provide any initial command
after connecting. Note: the timeout for subsequents commands,
and/or data chunks is specified by ReadTimeout.
Default: 5
SendBufTimeout NUMBER
This option specifies how long to wait (in milliseconds) if the
send buffer is full. Keep this value low to prevent clamd
hanging.
Default: 500
MaxQueue NUMBER
Maximum number of queued items (including those being processed
by MaxThreads threads). It is recommended to have this value at
least twice MaxThreads if possible.
WARNING: you shouldn't increase this too much to avoid running
out of file descriptors, the following condition should hold:
MaxThreads*MaxRecursion + MaxQueue - MaxThreads + 6 <
RLIMIT_NOFILE. RLIMIT_NOFILE is the maximum number of open file
descriptors (usually 1024), set by ulimit -n.
Default: 100
IdleTimeout NUMBER
This option specifies how long (in seconds) the process should
wait for a new job.
Default: 30
ExcludePath REGEX
Don't scan files and directories matching REGEX. This directive
can be used multiple times.
Default: disabled
MaxDirectoryRecursion NUMBER
Maximum depth directories are scanned at.
Default: 15
FollowDirectorySymlinks BOOL
Follow directory symlinks.
Default: no
CrossFilesystems BOOL
Scan files and directories on other filesystems.
Default: yes
FollowFileSymlinks BOOL
Follow regular file symlinks.
Default: no
SelfCheck NUMBER
This option specifies the time intervals (in seconds) in which
clamd should perform a database check.
Default: 600
VirusEvent COMMAND
Execute a command when a virus is found. In the command string
%v will be replaced with the virus name. Additionally, two
environment variables will be defined: $CLAM_VIRUSEVENT_FILENAME
and $CLAM_VIRUSEVENT_VIRUSNAME.
Default: disabled
ExitOnOOM BOOL
Stop daemon when libclamav reports out of memory condition.
Default: no
AllowAllMatchScan BOOL
Permit use of the ALLMATCHSCAN command.
Default: yes
Foreground BOOL
Don't fork into background.
Default: no
Debug BOOL
Enable debug messages from libclamav.
Default: no
LeaveTemporaryFiles BOOL
Do not remove temporary files (for debugging purpose).
Default: no
User STRING
Run the daemon as a specified user (the process must be started
by root).
Default: disabled
Bytecode BOOL
With this option enabled ClamAV will load bytecode from the
database. It is highly recommended you keep this option turned
on, otherwise you may miss detections for many new viruses.
Default: yes
BytecodeSecurity STRING
Set bytecode security level.
Possible values:
TrustSigned - trust bytecode loaded from signed .c[lv]d
files and insert runtime safety checks for bytecode loaded
from other sources,
Paranoid - don't trust any bytecode, insert runtime checks
for all.
Recommended: TrustSigned, because bytecode in .cvd files already
has these checks.
Default: TrustSigned
BytecodeTimeout NUMBER
Set bytecode timeout in milliseconds.
Default: 5000
BytecodeUnsigned BOOL
Allow loading bytecode from outside digitally signed .c[lv]d
files.
Default: no
BytecodeMode STRING
Set bytecode execution mode.
Possible values:
Auto - automatically choose JIT if possible, fallback to
interpreter
ForceJIT - always choose JIT, fail if not possible
ForceInterpreter - always choose interpreter
Test - run with both JIT and interpreter and compare
results. Make all failures fatal.
Default: Auto
DetectPUA BOOL
Detect Possibly Unwanted Applications.
Default: No
ExcludePUA CATEGORY
Exclude a specific PUA category. This directive can be used
multiple times. See http://www.clamav.net/doc/pua.html for the
complete list of PUA categories.
Default: disabled
IncludePUA CATEGORY
Only include a specific PUA category. This directive can be used
multiple times. See http://www.clamav.net/doc/pua.html for the
complete list of PUA categories.
Default: disabled
AlgorithmicDetection BOOL
In some cases (eg. complex malware, exploits in graphic files,
and others), ClamAV uses special algorithms to provide accurate
detection. This option controls the algorithmic detection.
Default: yes
ScanPE BOOL
PE stands for Portable Executable - it's an executable file
format used in all 32 and 64-bit versions of Windows operating
systems. This option allows ClamAV to perform a deeper analysis
of executable files and it's also required for decompression of
popular executable packers such as UPX.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanELF BOOL
Executable and Linking Format is a standard format for UN*X
executables. This option allows you to control the scanning of
ELF files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
DetectBrokenExecutables BOOL
With this option clamd will try to detect broken executables
(both PE and ELF) and mark them as Broken.Executable.
Default: no
ScanMail BOOL
Enable scanning of mail files.
If you turn off this option, the original files will still be
scanned, but without parsing individual messages/attachments.
Default: yes
ScanPartialMessages BOOL
Scan RFC1341 messages split over many emails. You will need to
periodically clean up $TemporaryDirectory/clamav-partial
directory. WARNING: This option may open your system to a DoS
attack. Never use it on loaded servers.
Default: no
PhishingSignatures BOOL
With this option enabled ClamAV will try to detect phishing
attempts by using signatures.
Default: yes
PhishingScanURLs BOOL
Scan URLs found in mails for phishing attempts using heuristics.
This will classify "Possibly Unwanted" phishing emails as
Phishing.Heuristics.Email.*
Default: yes
PhishingAlwaysBlockCloak BOOL
Always block cloaked URLs, even if URL isn't in database. This
can lead to false positives.
Default: no
PhishingAlwaysBlockSSLMismatch BOOL
Always block SSL mismatches in URLs, even if the URL isn't in
the database. This can lead to false positives.
Default: no
PartitionIntersection BOOL
Detect partition intersections in raw disk images using
heuristics.
Default: no
HeuristicScanPrecedence BOOL
Allow heuristic match to take precedence. When enabled, if a
heuristic scan (such as phishingScan) detects a possible
virus/phishing it will stop scanning immediately. Recommended,
saves CPU scan-time. When disabled, virus/phishing detected by
heuristic scans will be reported only at the end of a scan. If
an archive contains both a heuristically detected
virus/phishing, and a real malware, the real malware will be
reported. Keep this disabled if you intend to handle
"*.Heuristics.*" viruses differently from "real" malware. If a
non-heuristically-detected virus (signature-based) is found
first, the scan is interrupted immediately, regardless of this
config option.
Default: no
StructuredDataDetection BOOL
Enable the DLP module.
Default: no
StructuredMinCreditCardCount NUMBER
This option sets the lowest number of Credit Card numbers found
in a file to generate a detect.
Default: 3
StructuredMinSSNCount NUMBER
This option sets the lowest number of Social Security Numbers
found in a file to generate a detect.
Default: 3
StructuredSSNFormatNormal BOOL
With this option enabled the DLP module will search for valid
SSNs formatted as xxx-yy-zzzz.
Default: Yes
StructuredSSNFormatStripped BOOL
With this option enabled the DLP module will search for valid
SSNs formatted as xxxyyzzzz.
Default: No
ScanHTML BOOL
Perform HTML/JavaScript/ScriptEncoder normalisation and
decryption.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanOLE2 BOOL
This option enables scanning of OLE2 files, such as Microsoft
Office documents and .msi files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
OLE2BlockMacros BOOL
With this option enabled OLE2 files with VBA macros, which were
not detected by signatures will be marked as
"Heuristics.OLE2.ContainsMacros".
Default: no
ScanPDF BOOL
This option enables scanning within PDF files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanSWF BOOL
This option enables scanning within SWF files.
If you turn off this option, the original files will still be
scanned, but without decoding and additional processing.
Default: yes
ScanXMLDOCS BOOL
This option enables scanning xml-based document files supported
by libclamav.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanHWP3 BOOL
This option enables scanning HWP3 files.
If you turn off this option, the original files will still be
scanned, but without additional processing.
Default: yes
ScanArchive BOOL
Scan within archives and compressed files.
If you turn off this option, the original files will still be
scanned, but without unpacking and additional processing.
Default: yes
ArchiveBlockEncrypted BOOL
Mark encrypted archives as viruses (Encrypted.Zip,
Encrypted.RAR).
Default: no
ForceToDisk
This option causes memory or nested map scans to dump the
content to disk.
If you turn on this option, more data is written to disk and is
available when the leave-temps option is enabled at the cost of
more disk writes.
Default: no
Default: no
MaxScanSize SIZE
Sets the maximum amount of data to be scanned for each input
file. Archives and other containers are recursively extracted
and scanned up to this value. The size of an archive plus the
sum of the sizes of all files within archive count toward the
scan size. For example, a 1M uncompressed archive containing a
single 1M inner file counts as 2M toward the max scan size.
Warning: disabling this limit or setting it too high may result
in severe damage to the system.
Default: 100M
MaxFileSize SIZE
Files larger than this limit won't be scanned. Affects the input
file itself as well as files contained inside it (when the input
file is an archive, a document or some other kind of container).
Warning: disabling this limit or setting it too high may result
in severe damage to the system.
Default: 25M
MaxRecursion NUMBER
Nested archives are scanned recursively, e.g. if a Zip archive
contains a RAR file, all files within it will also be scanned.
This options specifies how deeply the process should be
continued. Warning: setting this limit too high may result in
severe damage to the system.
Default: 16
MaxFiles NUMBER
Number of files to be scanned within an archive, a document, or
any other kind of container. Warning: disabling this limit or
setting it too high may result in severe damage to the system.
Default: 10000
MaxEmbeddedPE SIZE
This option sets the maximum size of a file to check for
embedded PE.
Files larger than this value will skip the additional analysis
step.
Negative values are not allowed.
Default: 10M
MaxHTMLNormalize SIZE
This option sets the maximum size of a HTML file to normalize.
HTML files larger than this value will not be normalized or
scanned.
Negative values are not allowed.
Default: 10M
MaxHTMLNoTags SIZE
This option sets the maximum size of a normalized HTML file to
scan.
HTML files larger than this value after normalization will not
be scanned.
Negative values are not allowed.
Default: 2M
MaxScriptNormalize SIZE
This option sets the maximum size of a script file to normalize.
Script content larger than this value will not be normalized or
scanned.
Negative values are not allowed.
Default: 5M
MaxZipTypeRcg SIZE
This option sets the maximum size of a ZIP file to reanalyze
type recognition.
ZIP files larger than this value will skip the step to
potentially reanalyze as PE.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 1M
MaxPartitions SIZE
This option sets the maximum number of partitions of a raw disk
image to be scanned.
Raw disk images with more partitions than this value will have
up to the value partitions scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 50
MaxIconsPE SIZE
This option sets the maximum number of icons within a PE to be
scanned.
PE files with more icons than this value will have up to the
value number icons scanned.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 100
MaxRecHWP3 NUMBER
This option sets the maximum recursive calls to HWP3 parsing
function.
HWP3 files using more than this limit will be terminated and
alert the user.
Scans will be unable to scan any HWP3 attachments if the
recursive limit is reached.
Negative values are not allowed.
WARNING: setting this limit too high may result in severe damage
or impact performance.
Default: 16
PCREMatchLimit NUMBER
This option sets the maximum calls to the PCRE match function
during an instance of regex matching.
Instances using more than this limit will be terminated and
alert the user but the scan will continue.
For more information on match_limit, see the PCRE documentation.
Negative values are not allowed.
WARNING: setting this limit too high may severely impact
performance.
Default: 10000
PCRERecMatchLimit NUMBER
This option sets the maximum recursive calls to the PCRE match
function during an instance of regex matching.
Instances using more than this limit will be terminated and
alert the user but the scan will continue.
For more information on match_limit_recursion, see the PCRE
documentation.
Negative values are not allowed and values > PCREMatchLimit are
superfluous.
WARNING: setting this limit too high may severely impact
performance.
Default: 5000
PCREMaxFileSize SIZE
This option sets the maximum filesize for which PCRE subsigs
will be executed.
Files exceeding this limit will not have PCRE subsigs executed
unless a subsig is encompassed to a smaller buffer.
Negative values are not allowed.
Setting this value to zero disables the limit.
WARNING: setting this limit too high or disabling it may
severely impact performance.
Default: 25M
ScanOnAccess BOOL
This option enables on-access scanning (Linux only)
Default: disabled
OnAccessIncludePath STRING
This option specifies a directory (including all files and
directories inside it), which should be scanned on access. This
option can be used multiple times.
Default: disabled
OnAccessExcludePath STRING
This option allows excluding directories from on-access
scanning. It can be used multiple times.
Default: disabled
OnAccessExcludeUID NUMBER
With this option you can whitelist specific UIDs. Processes with
these UIDs will be able to access all files.
This option can be used multiple times (one per line).
Default: disabled
OnAccessMaxFileSize SIZE
Files larger than this value will not be scanned in on access.
Default: 5M
OnAccessMountPath STRING
Specifies a mount point (including all files and directories
under it), which should be scanned on access. This option can be
used multiple times.
Default: disabled
OnAccessDisableDDD BOOL
Disables the dynamic directory determination system which allows
for recursively watching include paths.
Default: no
OnAccessPrevention BOOL
Enables fanotify blocking when malicious files are found.
Default: disabled
DisableCertCheck BOOL
Disable authenticode certificate chain verification in PE files.
Default: no
StatsEnabled BOOL
Enable submission of statistical data
Default: no
StatsHostID STRING
HostID in the form of an UUID to use when submitting statistical
information.
Default: auto
StatsPEDisabled BOOL
Disable submission of PE section statistical data.
Default: no
StatsTimeout NUMBER
Timeout in seconds to timeout communication with the stats
server.
Default: 10
NOTES
All options expressing a size are limited to max 4GB. Values in excess will be resetted to the maximum.
FILES
/etc/clamav/clamd.conf
AUTHORS
Tomasz Kojm <tkojm@clamav.net>, Kevin Lin <klin@sourcefire.com>
SEE ALSO
clamd(8), clamdscan(1), clamav-milter(8), freshclam(1), freshclam.conf(5)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
