diffstat(1)
NAME
diffstat - make histogram from diff-output
SYNOPSIS
diffstat [options] [file-specifications]
DESCRIPTION
This program reads the output of diff and displays a histogram of the
insertions, deletions, and modifications per-file. Diffstat is a
program that is useful for reviewing large, complex patch files. It
reads from one or more input files which contain output from diff,
producing a histogram of the total lines changed for each file
referenced.
If the input filename ends with .bz2, .gz, .lzma, .z or .Z, diffstat
will read the uncompressed data via a pipe from the corresponding
program. It also can infer the compression type from files piped via
the standard input.
Diffstat recognizes the most popular types of output from diff:
unified
preferred by the patch utility.
context
best for readability, but not very compact.
default
not good for much, but simple to generate.
Diffstat detects the lines that are output by diff to tell which files
are compared, and then counts the markers in the first column that
denote the type of change (insertion, deletion or modification). These
are shown in the histogram as "+", "-" and "!" characters.
If no filename is given on the command line, diffstat reads the
differences from the standard input.
OPTIONS
-b ignore lines matching "Binary files XXX and YYY differ" in the
diff
-c prefix each line of output with "#", making it a comment-line
for shell scripts.
-C add SGR color escape sequences to highlight the histogram.
-D destination
specify a directory containing files which can be referred to as
the result of applying the differences. diffstat will count the
lines in the corresponding files (after adjusting the names by
the -p option) to obtain the total number of lines in each file.
The remainder, after subtracting modified and deleted lines, is
shown as "unchanged lines".
-d The debug prints a lot of information. It is normally compiled-
in, but can be suppressed.
-e file
redirect standard error to file.
-E strip out ANSI escape sequences on each line before parsing the
differences. This allows diffstat to be used with colordiff.
-f format
specify the format of the histogram.
0 for concise, which shows only the value and a single
histogram code for each of insert (+), delete (-) or modify
(!)
1 for normal output,
2 to fill in the histogram with dots,
4 to print each value with the histogram.
Any nonzero value gives a histogram. The dots and individual
values can be combined, e.g., -f6 gives both.
-h prints the usage message and exits.
-k suppress the merging of filenames in the report.
-K attempt to improve the annotation of "only" files by looking for
a match in the resulting set of files and inferring whether the
file was added or removed.
This does not currently work in combination with -R because
diffstat maintains only the resulting set of files.
-l lists only the filenames. No histogram is generated.
-m merge insert/delete counts from each "chunk" of the patch file
to approximate a count of the modified lines.
-n number
specify the minimum width used for filenames. If you do not
specify this, diffstat uses the length of the longest filename,
after stripping common prefixes.
-N number
specify the maximum width used for filenames. Names longer than
this limit are truncated on the left. If you do not specify
this, diffstat next checks the -n option.
-o file
redirect standard output to file.
-p number
override the logic that strips common pathnames, simulating the
patch "-p" option.
If you do not give a -p option, diffstat examines the
differences and strips the common prefix from the pathnames.
This is not what patch does.
-q suppress the "0 files changed" message for empty diffs.
-r code
provides optional rounding of the data shown in histogram,
rather than truncating with error adjustments.
0 is the default. No rounding is performed, but accumulated
errors are added to following columns.
1 rounds the data
2 rounds the data and adjusts the histogram to ensure that it
displays something if there are any differences even if those
would normally be rounded to zero.
-R Assume patch was created with old and new files swapped.
-s show only the summary line, e.g., number of insertions and
deletions.
-S source
this is like the -D option, but specifies a location where the
original files (before applying differences) can be found.
-t overrides the histogram, generates output of comma separated
values for the number of changed lines found in the differences
for each file: inserted, deleted and modified.
If -S or -D options are given, the number of unchanged lines
precedes the number of changes.
-T prints the numbers that the -t option would show, between the
pathname and histogram.
The width of the number of changes is determined by the largest
value (but at least 3). The width given in the -w option is
separate from the width of these numbers.
-u suppress the sorting of filenames in the report.
-v show progress, e.g., if the output is redirected to a file,
write progress messages to the standard error.
-V prints the current version number and exits.
-w number
specify the maximum width of the histogram. The histogram will
never be shorter than 10 columns, just in case the filenames get
too large.
ENVIRONMENT
Diffstat runs in a POSIX environment.
You can override the compiled-in paths of programs used for
decompressing input files by setting environment variables
corresponding to their name:
DIFFSTAT_BZCAT_PATH
DIFFSTAT_BZIP2_PATH
DIFFSTAT_COMPRESS_PATH
DIFFSTAT_GZIP_PATH
DIFFSTAT_LZCAT_PATH
DIFFSTAT_PCAT_PATH
DIFFSTAT_UNCOMPRESS_PATH
DIFFSTAT_XZ_PATH
DIFFSTAT_ZCAT_PATH
However, diffstat assumes that the resulting program uses the same
command-line options, e.g., "-c" to decompress to the standard output.
FILES
Diffstat is a single binary module, which uses no auxiliary files.
BUGS
Diffstat makes a lot of assumptions about the format of diff's output. There is no way to obtain a filename from the standard diff between two files with no options. Context diffs work, as well as unified diffs. There's no easy way to determine the degree of overlap between the "before" and "after" displays of modified lines. diffstat simply counts the number of inserted and deleted lines to approximate modified lines for the -m option.
SEE ALSO
diff(1), patch(1).
AUTHOR
Thomas Dickey <dickey@invisible-island.net>.
DIFFSTAT(1)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
