gfortran − GNU Fortran compiler
[−g] [−pg] [−Olevel]
[−o outfile] infile...
Only the most useful options are listed here; see below for the remainder.
The gfortran command supports all the options supported by the gcc command. Only options specific to GNU Fortran are documented here.
All GCC and GNU Fortran options are accepted both by gfortran and by gcc (as well as any other drivers built at the same time, such as g++), since adding GNU Fortran to the GCC distribution enables acceptance of GNU Fortran options by all of the relevant drivers.
In some cases, options have positive and negative forms; the negative form of −ffoo would be −fno−foo. This manual documents only one of these two forms, whichever one is not the default.
Here is a
summary of all the options specific to GNU
Fortran, grouped by type. Explanations are in the following
Fortran Language Options
−fall−intrinsics −ffree−form −fno−fixed−form −fdollar−ok −fimplicit−none −fmax−identifier−length −std=std −fd−lines−as−code −fd−lines−as−comments −ffixed−line−length−n −ffixed−line−length−none −ffree−line−length−n −ffree−line−length−none −fdefault−double−8 −fdefault−integer−8 −fdefault−real−8 −fcray−pointer −fopenmp −fno−range−check −fbackslash −fmodule−private
−cpp −dD −dI −dM −dN −dU −fworking−directory −imultilib dir −iprefix file −isysroot dir −iquote −isystem dir −nocpp −nostdinc −undef −Aquestion=answer −A−question[=answer] −C −CC −Dmacro[=defn] −Umacro −H −P
Error and Warning Options
−fmax−errors=n −fsyntax−only −pedantic −pedantic−errors −Wall −Waliasing −Wampersand −Warray−bounds −Wcharacter−truncation −Wconversion −Wimplicit−interface −Wimplicit−procedure −Wline−truncation −Wintrinsics−std −Wsurprising −Wno−tabs −Wunderflow −Wunused−parameter −Wintrinsic−shadow −Wno−align−commons
−fdump−fortran−original −fdump−fortran−optimized −ffpe−trap=list −fdump−core −fbacktrace −fdump−parse−tree
−Idir −Jdir −fintrinsic−modules−path dir
−fconvert=conversion −fno−range−check −frecord−marker=length −fmax−subrecord−length=length −fsign−zero
Code Generation Options
−fno−automatic −ff2c −fno−underscoring −fno−whole−file −fsecond−underscore −fbounds−check −fcheck−array−temporaries −fmax−array−constructor =n −fcheck=<all|array−temps|bounds|do|mem|pointer|recursion> −fcoarray=<none|single> −fmax−stack−var−size=n −fpack−derived −frepack−arrays −fshort−enums −fexternal−blas −fblas−matmul−limit=n −frecursive −finit−local−zero −finit−integer=n −finit−real=<zero|inf|−inf|nan|snan> −finit−logical=<true|false> −finit−character=n −fno−align−commons −fno−protect−parens −frealloc−lhs
controlling Fortran dialect
The following options control the details of the Fortran dialect accepted by the compiler:
Specify the layout used by the source file. The free form layout was introduced in Fortran 90. Fixed form was traditionally used in older Fortran programs. When neither option is specified, the source form is determined by the file extension.
This option causes all intrinsic procedures (including the GNU-specific extensions) to be accepted. This can be useful with −std=f95 to force standard-compliance but get access to the full range of intrinsics available with gfortran. As a consequence, −Wintrinsics−std will be ignored and no user-defined procedure with the same name as any intrinsic will be called except when it is explicitly declared "EXTERNAL".
Enable special treatment for lines beginning with "d" or "D" in fixed form sources. If the −fd−lines−as−code option is given they are treated as if the first column contained a blank. If the −fd−lines−as−comments option is given, they are treated as comment lines.
Set the "DOUBLE PRECISION" type to an 8 byte wide type. If −fdefault−real−8 is given, "DOUBLE PRECISION" would instead be promoted to 16 bytes if possible, and −fdefault−double−8 can be used to prevent this. The kind of real constants like "1.d0" will not be changed by −fdefault−real−8 though, so also −fdefault−double−8 does not affect it.
Set the default integer and logical types to an 8 byte wide type. Do nothing if this is already the default. This option also affects the kind of integer constants like 42.
Set the default real type to an 8 byte wide type. Do nothing if this is already the default. This option also affects the kind of non-double real constants like 1.0, and does promote the default width of "DOUBLE PRECISION" to 16 bytes if possible, unless "−fdefault−double−8" is given, too.
Allow $ as a valid non-first character in a symbol name. Symbols that start with $ are rejected since it is unclear which rules to apply to implicit typing as different vendors implement different rules. Using $ in "IMPLICIT" statements is also rejected.
Change the interpretation of backslashes in string literals from a single backslash character to "C−style" escape characters. The following combinations are expanded " ", " ", "\f", "\n", "\r", "\t", "\v", "\\", and "\0" to the ASCII characters alert, backspace, form feed, newline, carriage return, horizontal tab, vertical tab, backslash, and NUL , respectively. Additionally, "\x"nn, "\u"nnnn and "\U"nnnnnnnn (where each n is a hexadecimal digit) are translated into the Unicode characters corresponding to the specified code points. All other combinations of a character preceded by \ are unexpanded.
Set the default accessibility of module entities to "PRIVATE". Use-associated entities will not be accessible unless they are explicitly declared as "PUBLIC".
Set column after which characters are ignored in typical fixed-form lines in the source file, and through which spaces are assumed (as if padded to that length) after the ends of short fixed-form lines.
Popular values for n include 72 (the standard and the default), 80 (card image), and 132 (corresponding to "extended-source" options in some popular compilers). n may also be none, meaning that the entire line is meaningful and that continued character constants never have implicit spaces appended to them to fill out the line. −ffixed−line−length−0 means the same thing as −ffixed−line−length−none.
Set column after which characters are ignored in typical free-form lines in the source file. The default value is 132. n may be none, meaning that the entire line is meaningful. −ffree−line−length−0 means the same thing as −ffree−line−length−none.
Specify the maximum allowed identifier length. Typical values are 31 (Fortran 95) and 63 (Fortran 2003 and Fortran 2008).
Specify that no implicit typing is allowed, unless overridden by explicit "IMPLICIT" statements. This is the equivalent of adding "implicit none" to the start of every procedure.
Enable the Cray pointer extension, which provides C−like pointer functionality.
Enable the OpenMP extensions. This includes OpenMP "!$omp" directives in free form and "c$omp", *$omp and "!$omp" directives in fixed form, "!$" conditional compilation sentinels in free form and "c$", "*$" and "!$" sentinels in fixed form, and when linking arranges for the OpenMP runtime library to be linked in. The option −fopenmp implies −frecursive.
Disable range checking on results of simplification of constant expressions during compilation. For example, GNU Fortran will give an error at compile time when simplifying "a = 1. / 0". With this option, no error will be given and "a" will be assigned the value "+Infinity". If an expression evaluates to a value outside of the relevant range of ["−HUGE()":"HUGE()"], then the expression will be replaced by "−Inf" or "+Inf" as appropriate. Similarly, "DATA i/Z'FFFFFFFF'/" will result in an integer overflow on most systems, but with −fno−range−check the value will "wrap around" and "i" will be initialized to −1 instead.
Specify the standard to which the program is expected to conform, which may be one of f95, f2003, f2008, gnu, or legacy. The default value for std is gnu, which specifies a superset of the Fortran 95 standard that includes all of the extensions supported by GNU Fortran, although warnings will be given for obsolete extensions not recommended for use in new code. The legacy value is equivalent but without the warnings for obsolete extensions, and may be useful for old non-standard programs. The f95, f2003 and f2008 values specify strict conformance to the Fortran 95, Fortran 2003 and Fortran 2008 standards, respectively; errors are given for all extensions beyond the relevant language standard, and warnings are given for the Fortran 77 features that are permitted but obsolescent in later standards.
Preprocessor related options. See section Preprocessing and conditional compilation for more detailed information on preprocessing in gfortran.
Enable preprocessing. The preprocessor is automatically invoked if the file extension is .fpp, .FPP, .F, .FOR, .FTN, .F90, .F95, .F03 or .F08. Use this option to manually enable preprocessing of any kind of Fortran file.
To disable preprocessing of files with any of the above listed extensions, use the negative form: −nocpp.
The preprocessor is run in traditional mode. Any restrictions of the file-format, especially the limits on line length, apply for preprocessed output as well, so it might be advisable to use the −ffree−line−length−none or −ffixed−line−length−none options.
Instead of the normal output, generate a list of '#define' directives for all the macros defined during the execution of the preprocessor, including predefined macros. This gives you a way of finding out what is predefined in your version of the preprocessor. Assuming you have no file foo.f90, the command
touch foo.f90; gfortran −cpp −E −dM foo.f90
will show all the predefined macros.
Like −dM except in two respects: it does not include the predefined macros, and it outputs both the "#define" directives and the result of preprocessing. Both kinds of output go to the standard output file.
Like −dD, but emit only the macro names, not their expansions.
Like dD except that only macros that are expanded, or whose definedness is tested in preprocessor directives, are output; the output is delayed until the use or test of the macro; and '#undef' directives are also output for macros tested but undefined at the time.
Output '#include' directives in addition to the result of preprocessing.
Enable generation of linemarkers in the preprocessor output that will let the compiler know the current working directory at the time of preprocessing. When this option is enabled, the preprocessor will emit, after the initial linemarker, a second linemarker with the current working directory followed by two slashes. GCC will use this directory, when it’s present in the preprocessed input, as the directory emitted as the current working directory in some debugging information formats. This option is implicitly enabled if debugging information is enabled, but this can be inhibited with the negated form −fno−working−directory. If the −P flag is present in the command line, this option has no effect, since no "#line" directives are emitted whatsoever.
Search dir for include files, but do it after all directories specified with −I and the standard system directories have been exhausted. dir is treated as a system include directory. If dir begins with "=", then the "=" will be replaced by the sysroot prefix; see −−sysroot and −isysroot.
Use dir as a subdirectory of the directory containing target-specific C ++ headers.
Specify prefix as the prefix for subsequent −iwithprefix options. If the prefix represents a directory, you should include the final '/'.
This option is like the −−sysroot option, but applies only to header files. See the −−sysroot option for more information.
Search dir only for header files requested with "#include "file""; they are not searched for "#include <file>", before all directories specified by −I and before the standard system directories. If dir begins with "=", then the "=" will be replaced by the sysroot prefix; see −−sysroot and −isysroot.
Search dir for header files, after all directories specified by −I but before the standard system directories. Mark it as a system directory, so that it gets the same special treatment as is applied to the standard system directories. If dir begins with "=", then the "=" will be replaced by the sysroot prefix; see −−sysroot and −isysroot.
Do not search the standard system directories for header files. Only the directories you have specified with −I options (and the directory of the current file, if appropriate) are searched.
Do not predefine any system-specific or GCC-specific macros. The standard predefined macros remain defined.
Make an assertion with the predicate predicate and answer answer. This form is preferred to the older form −A predicate(answer), which is still supported, because it does not use shell special characters.
Cancel an assertion with the predicate predicate and answer answer.
Do not discard comments. All comments are passed through to the output file, except for comments in processed directives, which are deleted along with the directive.
You should be prepared for side effects when using −C; it causes the preprocessor to treat comments as tokens in their own right. For example, comments appearing at the start of what would be a directive line have the effect of turning that line into an ordinary source line, since the first token on the line is no longer a '#'.
Warning: this currently handles C−Style comments only. The preprocessor does not yet recognize Fortran-style comments.
Do not discard comments, including during macro expansion. This is like −C, except that comments contained within macros are also passed through to the output file where the macro is expanded.
In addition to the side-effects of the −C option, the −CC option causes all C ++ −style comments inside a macro to be converted to C−style comments. This is to prevent later use of that macro from inadvertently commenting out the remainder of the source line. The −CC option is generally used to support lint comments.
Warning: this currently handles C− and C ++ −Style comments only. The preprocessor does not yet recognize Fortran-style comments.
Predefine name as a macro, with definition 1.
The contents of definition are tokenized and processed as if they appeared during translation phase three in a '#define' directive. In particular, the definition will be truncated by embedded newline characters.
If you are invoking the preprocessor from a shell or shell-like program you may need to use the shell’s quoting syntax to protect characters such as spaces that have a meaning in the shell syntax.
If you wish to define a function-like macro on the command line, write its argument list with surrounding parentheses before the equals sign (if any). Parentheses are meaningful to most shells, so you will need to quote the option. With sh and csh, "−D'name(args...)=definition'" works.
−D and −U options are processed in the order they are given on the command line. All −imacros file and −include file options are processed after all −D and −U options.
Print the name of each header file used, in addition to other normal activities. Each name is indented to show how deep in the '#include' stack it is.
Inhibit generation of linemarkers in the output from the preprocessor. This might be useful when running the preprocessor on something that is not C code, and will be sent to a program which might be confused by the linemarkers.
Cancel any previous definition of name, either built in or provided with a −D option.
request or suppress errors and warnings
Errors are diagnostic messages that report that the GNU Fortran compiler cannot compile the relevant piece of source code. The compiler will continue to process the program in an attempt to report further errors to aid in debugging, but will not produce any compiled output.
Warnings are diagnostic messages that report constructions which are not inherently erroneous but which are risky or suggest there is likely to be a bug in the program. Unless −Werror is specified, they do not prevent compilation of the program.
You can request many specific warnings with options beginning −W, for example −Wimplicit to request warnings on implicit declarations. Each of these specific warning options also has a negative form beginning −Wno− to turn off warnings; for example, −Wno−implicit. This manual lists only one of the two forms, whichever is not the default.
control the amount and kinds of errors and warnings produced
by GNU Fortran:
Limits the maximum number of error messages to n, at which point GNU Fortran bails out rather than attempting to continue processing the source code. If n is 0, there is no limit on the number of error messages produced.
Check the code for syntax errors, but don’t actually compile it. This will generate module files for each module present in the code, but no other output file.
Issue warnings for uses of extensions to Fortran 95. −pedantic also applies to C−language constructs where they occur in GNU Fortran source files, such as use of \e in a character constant within a directive like "#include".
Valid Fortran 95 programs should compile properly with or without this option. However, without this option, certain GNU extensions and traditional Fortran features are supported as well. With this option, many of them are rejected.
Some users try to use −pedantic to check programs for conformance. They soon find that it does not do quite what they want−−−it finds some nonstandard practices, but not all. However, improvements to GNU Fortran in this area are welcome.
This should be used in conjunction with −std=f95, −std=f2003 or −std=f2008.
Like −pedantic, except that errors are produced rather than warnings.
Enables commonly used warning options pertaining to usage that we recommend avoiding and that we believe are easy to avoid. This currently includes −Waliasing, −Wampersand, −Wconversion, −Wsurprising, −Wintrinsics−std, −Wno−tabs, −Wintrinsic−shadow, −Wline−truncation, −Wreal−q−constant and −Wunused.
Warn about possible aliasing of dummy arguments. Specifically, it warns if the same actual argument is associated with a dummy argument with "INTENT(IN)" and a dummy argument with "INTENT(OUT)" in a call with an explicit interface.
The following example will trigger the warning.
integer, intent(in) :: a
integer, intent(out) :: b
integer :: a
Warn about missing ampersand in continued character constants. The warning is given with −Wampersand, −pedantic, −std=f95, −std=f2003 and −std=f2008. Note: With no ampersand given in a continued character constant, GNU Fortran assumes continuation at the first non-comment, non-whitespace character after the ampersand that initiated the continuation.
Warn about array temporaries generated by the compiler. The information generated by this warning is sometimes useful in optimization, in order to avoid such temporaries.
Warn when a character assignment will truncate the assigned string.
Warn when a source code line will be truncated.
Warn about implicit conversions that are likely to change the value of the expression after conversion. Implied by −Wall.
Warn about implicit conversions between different types and kinds.
Warn if a procedure is called without an explicit interface. Note this only checks that an explicit interface is present. It does not check that the declared interfaces are consistent across program units.
Warn if a procedure is called that has neither an explicit interface nor has been declared as "EXTERNAL".
Warn if gfortran finds a procedure named like an intrinsic not available in the currently selected standard (with −std) and treats it as "EXTERNAL" procedure because of this. −fall−intrinsics can be used to never trigger this behavior and always link to the intrinsic regardless of the selected standard.
Produce a warning if a real-literal-constant contains a "q" exponent-letter.
Produce a warning when "suspicious" code constructs are encountered. While technically legal these usually indicate that an error has been made.
This currently produces a warning under the following circumstances:
An INTEGER SELECT construct has a CASE that can never be matched as its lower value is greater than its upper value.
A LOGICAL SELECT construct has three CASE statements.
A TRANSFER specifies a source that is shorter than the destination.
The type of a function result is declared more than once with the same type. If −pedantic or standard-conforming mode is enabled, this is an error.
A "CHARACTER" variable is declared with negative length.
By default, tabs are accepted as whitespace, but tabs are not members of the Fortran Character Set. For continuation lines, a tab followed by a digit between 1 and 9 is supported. −Wno−tabs will cause a warning to be issued if a tab is encountered. Note, −Wno−tabs is active for −pedantic, −std=f95, −std=f2003, −std=f2008 and −Wall.
Produce a warning when numerical constant expressions are encountered, which yield an UNDERFLOW during compilation.
Warn if a user-defined procedure or module procedure has the same name as an intrinsic; in this case, an explicit interface or "EXTERNAL" or "INTRINSIC" declaration might be needed to get calls later resolved to the desired intrinsic/procedure.
Warn about unused dummy arguments. This option is implied by −Wall.
Contrary to gcc’s meaning of −Wunused−parameter, gfortran’s implementation of this option does not warn about unused dummy arguments (see −Wunused−dummy−argument), but about unused "PARAMETER" values. −Wunused−parameter is not included in −Wall but is implied by −Wall −Wextra.
By default, gfortran warns about any occasion of variables being padded for proper alignment inside a "COMMON" block. This warning can be turned off via −Wno−align−commons. See also −falign−commons.
Turns all warnings into errors.
Some of these have no effect when compiling programs written in Fortran.
debugging your program or GNU Fortran
GNU Fortran has various special options that are used for debugging either your program or the GNU Fortran compiler.
Output the internal parse tree after translating the source program into internal representation. Only really useful for debugging the GNU Fortran compiler itself.
Output the parse tree after front-end optimization. Only really useful for debugging the GNU Fortran compiler itself.
Output the internal parse tree after translating the source program into internal representation. Only really useful for debugging the GNU Fortran compiler itself. This option is deprecated; use "−fdump−fortran−original" instead.
Specify a list of IEEE exceptions when a Floating Point Exception ( FPE ) should be raised. On most systems, this will result in a SIGFPE signal being sent and the program being interrupted, producing a core file useful for debugging. list is a (possibly empty) comma-separated list of the following IEEE exceptions: invalid (invalid floating point operation, such as "SQRT(−1.0)"), zero (division by zero), overflow (overflow in a floating point operation), underflow (underflow in a floating point operation), precision (loss of precision during operation) and denormal (operation produced a denormal value).
Some of the routines in the Fortran runtime library, like CPU_TIME , are likely to trigger floating point exceptions when "ffpe−trap=precision" is used. For this reason, the use of "ffpe−trap=precision" is not recommended.
Specify that, when a runtime error is encountered or a deadly signal is emitted (segmentation fault, illegal instruction, bus error or floating-point exception), the Fortran runtime library should output a backtrace of the error. This option only has influence for compilation of the Fortran main program.
Request that a core-dump file is written to disk when a runtime error is encountered on systems that support core dumps. This option is only effective for the compilation of the Fortran main program.
These options affect how GNU Fortran searches for files specified by the "INCLUDE" directive and where it searches for previously compiled modules.
It also affects
the search paths used by cpp when used to preprocess
These affect interpretation of the "INCLUDE" directive (as well as of the "#include" directive of the cpp preprocessor).
Also note that the general behavior of −I and "INCLUDE" is pretty much the same as of −I with "#include" in the cpp preprocessor, with regard to looking for header.gcc files and other such things.
This path is also used to search for .mod files when previously compiled modules are required by a "USE" statement.
This option specifies where to put .mod files for compiled modules. It is also added to the list of directories to searched by an "USE" statement.
The default is the current directory.
This option specifies the location of pre-compiled intrinsic modules, if they are not in the default location expected by the compiler.
the linking step
These options come into play when the compiler links object files into an executable output file. They are meaningless if the compiler is not doing a link step.
On systems that provide libgfortran as a shared and a static library, this option forces the use of the static version. If no shared version of libgfortran was built when the compiler was configured, this option has no effect.
These options affect the runtime behavior of programs compiled with GNU Fortran.
Specify the representation of data for unformatted files. Valid values for conversion are: native, the default; swap, swap between big− and little-endian; big-endian, use big-endian representation for unformatted files; little-endian, use little-endian representation for unformatted files.
This option has an effect only when used in the main program. The "CONVERT" specifier and the GFORTRAN_CONVERT_UNIT environment variable override the default specified by −fconvert.
Disable range checking of input values during integer "READ" operations. For example, GNU Fortran will give an error if an input value is outside of the relevant range of ["−HUGE()":"HUGE()"]. In other words, with "INTEGER (kind=4) :: i" , attempting to read −2147483648 will give an error unless −fno−range−check is given.
Specify the length of record markers for unformatted files. Valid values for length are 4 and 8. Default is 4. This is different from previous versions of gfortran, which specified a default record marker length of 8 on most systems. If you want to read or write files compatible with earlier versions of gfortran, use −frecord−marker=8.
Specify the maximum length for a subrecord. The maximum permitted value for length is 2147483639, which is also the default. Only really useful for use by the gfortran testsuite.
When enabled, floating point numbers of value zero with the sign bit set are written as negative number in formatted output and treated as negative in the "SIGN" intrinsic. "fno−sign−zero" does not print the negative sign of zero values and regards zero as positive number in the "SIGN" intrinsic for compatibility with F77. Default behavior is to show the negative sign.
code generation conventions
These machine-independent options control the interface conventions used in code generation.
Most of them
have both positive and negative forms; the negative form of
−ffoo would be −fno−foo. In
the table below, only one of the forms is
listed−−−the one which is not the default.
You can figure out the other form by either removing
no− or adding it.
Treat each program unit (except those marked as RECURSIVE ) as if the "SAVE" statement were specified for every local variable and array referenced in it. Does not affect common blocks. (Some Fortran compilers provide this option under the name −static or −save.) The default, which is −fautomatic, uses the stack for local variables smaller than the value given by −fmax−stack−var−size. Use the option −frecursive to use no static memory.
Generate code designed to be compatible with code generated by g77 and f2c.
The calling conventions used by g77 (originally implemented in f2c) require functions that return type default "REAL" to actually return the C type "double", and functions that return type "COMPLEX" to return the values via an extra argument in the calling sequence that points to where to store the return value. Under the default GNU calling conventions, such functions simply return their results as they would in GNU C−−−default "REAL" functions return the C type "float", and "COMPLEX" functions return the GNU C type "complex". Additionally, this option implies the −fsecond−underscore option, unless −fno−second−underscore is explicitly requested.
This does not affect the generation of code that interfaces with the libgfortran library.
Caution: It is not a good idea to mix Fortran code compiled with −ff2c with code compiled with the default −fno−f2c calling conventions as, calling "COMPLEX" or default "REAL" functions between program parts which were compiled with different calling conventions will break at execution time.
Caution: This will break code which passes intrinsic functions of type default "REAL" or "COMPLEX" as actual arguments, as the library implementations use the −fno−f2c calling conventions.
Do not transform names of entities specified in the Fortran source file by appending underscores to them.
With −funderscoring in effect, GNU Fortran appends one underscore to external names with no underscores. This is done to ensure compatibility with code produced by many UNIX Fortran compilers.
Caution: The default behavior of GNU Fortran is incompatible with f2c and g77, please use the −ff2c option if you want object files compiled with GNU Fortran to be compatible with object code created with these tools.
Use of −fno−underscoring is not recommended unless you are experimenting with issues such as integration of GNU Fortran into existing system environments (vis−a−vis existing libraries, tools, and so on).
For example, with −funderscoring, and assuming other defaults like −fcase−lower and that "j()" and "max_count()" are external functions while "my_var" and "lvar" are local variables, a statement like
I = J() + MAX_COUNT (MY_VAR, LVAR)
is implemented as something akin to:
i = j_() + max_count__(&my_var__, &lvar);
With −fno−underscoring, the same statement is implemented as:
i = j() + max_count(&my_var, &lvar);
Use of −fno−underscoring allows direct specification of user-defined names while debugging and when interfacing GNU Fortran code with other languages.
Note that just because the names match does not mean that the interface implemented by GNU Fortran for an external name matches the interface implemented by some other language for that same name. That is, getting code produced by GNU Fortran to link to code produced by some other compiler using this or any other method can be only a small part of the overall solution−−−getting the code generated by both compilers to agree on issues other than naming can require significant effort, and, unlike naming disagreements, linkers normally cannot detect disagreements in these other areas.
Also, note that with −fno−underscoring, the lack of appended underscores introduces the very real possibility that a user-defined external name will conflict with a name in a system library, which could make finding unresolved-reference bugs quite difficult in some cases−−−they might occur at program run time, and show up only as buggy behavior at run time.
In future versions of GNU Fortran we hope to improve naming and linking issues so that debugging always involves using the names as they appear in the source, even if the names as seen by the linker are mangled to prevent accidental linking between procedures with incompatible interfaces.
This flag causes the compiler to resolve and translate each procedure in a file separately.
By default, the whole file is parsed and placed in a single front-end tree. During resolution, in addition to all the usual checks and fixups, references to external procedures that are in the same file effect resolution of that procedure, if not already done, and a check of the interfaces. The dependences are resolved by changing the order in which the file is translated into the backend tree. Thus, a procedure that is referenced is translated before the reference and the duplication of backend tree declarations eliminated.
The −fno−whole−file option is deprecated and may lead to wrong code.
By default, GNU Fortran appends an underscore to external names. If this option is used GNU Fortran appends two underscores to names with underscores and one underscore to external names with no underscores. GNU Fortran also appends two underscores to internal names with underscores to avoid naming collisions with external names.
This option has no effect if −fno−underscoring is in effect. It is implied by the −ff2c option.
Otherwise, with this option, an external name such as "MAX_COUNT" is implemented as a reference to the link-time external symbol "max_count__", instead of "max_count_". This is required for compatibility with g77 and f2c, and is implied by use of the −ff2c option.
Disable coarray support; using coarray declarations and image-control statements will produce a compile-time error. (Default)
Single-image mode, i.e. "num_images()" is always one.
Enable the generation of run-time checks; the argument shall be a comma-delimited list of the following keywords.
Enable all run-time test of −fcheck.
Warns at run time when for passing an actual argument a temporary array had to be generated. The information generated by this warning is sometimes useful in optimization, in order to avoid such temporaries.
Note: The warning is only printed once per location.
Enable generation of run-time checks for array subscripts and against the declared minimum and maximum values. It also checks array indices for assumed and deferred shape arrays against the actual allocated bounds and ensures that all string lengths are equal for character array constructors without an explicit typespec.
Some checks require that −fcheck=bounds is set for the compilation of the main program.
Note: In the future this may also include other forms of checking, e.g., checking substring references.
Enable generation of run-time checks for invalid modification of loop iteration variables.
Enable generation of run-time checks for memory allocation. Note: This option does not affect explicit allocations using the "ALLOCATE" statement, which will be always checked.
Enable generation of run-time checks for pointers and allocatables.
Enable generation of run-time checks for recursively called subroutines and functions which are not marked as recursive. See also −frecursive. Note: This check does not work for OpenMP programs and is disabled if used together with −frecursive and −fopenmp.
Deprecated alias for −fcheck=bounds.
Deprecated alias for −fcheck=array−temps.
This option can be used to increase the upper limit permitted in array constructors. The code below requires this option to expand the array at compile time.
integer, parameter :: n = 100000
integer, parameter :: i(n) = (/ (2*j, j = 1, n) /)
print '(10(I0,1X))', i
end program test
Caution: This option can lead to long compile times and excessively large object files.
The default value for n is 65535.
This option specifies the size in bytes of the largest array that will be put on the stack; if the size is exceeded static memory is used (except in procedures marked as RECURSIVE ). Use the option −frecursive to allow for recursive procedures which do not have a RECURSIVE attribute or for parallel programs. Use −fno−automatic to never use the stack.
This option currently only affects local arrays declared with constant bounds, and may not apply to all character variables. Future versions of GNU Fortran may improve this behavior.
The default value for n is 32768.
This option tells GNU Fortran to pack derived type members as closely as possible. Code compiled with this option is likely to be incompatible with code compiled without this option, and may execute slower.
In some circumstances GNU Fortran may pass assumed shape array sections via a descriptor describing a noncontiguous area of memory. This option adds code to the function prologue to repack the data into a contiguous block at runtime.
This should result in faster accesses to the array. However it can introduce significant overhead to the function call, especially when the passed data is noncontiguous.
This option is provided for interoperability with C code that was compiled with the −fshort−enums option. It will make GNU Fortran choose the smallest "INTEGER" kind a given enumerator set will fit in, and give all its enumerators this kind.
This option will make gfortran generate calls to BLAS functions for some matrix operations like "MATMUL", instead of using our own algorithms, if the size of the matrices involved is larger than a given limit (see −fblas−matmul−limit). This may be profitable if an optimized vendor BLAS library is available. The BLAS library will have to be specified at link time.
Only significant when −fexternal−blas is in effect. Matrix multiplication of matrices with size larger than (or equal to) n will be performed by calls to BLAS functions, while others will be handled by gfortran internal algorithms. If the matrices involved are not square, the size comparison is performed using the geometric mean of the dimensions of the argument and result matrices.
The default value for n is 30.
Allow indirect recursion by forcing all local arrays to be allocated on the stack. This flag cannot be used together with −fmax−stack−var−size= or −fno−automatic.
The −finit−local−zero option instructs the compiler to initialize local "INTEGER", "REAL", and "COMPLEX" variables to zero, "LOGICAL" variables to false, and "CHARACTER" variables to a string of null bytes. Finer-grained initialization options are provided by the −finit−integer=n, −finit−real=<zero|inf|−inf|nan|snan> (which also initializes the real and imaginary parts of local "COMPLEX" variables), −finit−logical=<true|false>, and −finit−character=n (where n is an ASCII character value) options. These options do not initialize components of derived type variables, nor do they initialize variables that appear in an "EQUIVALENCE" statement. (This limitation may be removed in future releases).
Note that the −finit−real=nan option initializes "REAL" and "COMPLEX" variables with a quiet NaN. For a signalling NaN use −finit−real=snan; note, however, that compile-time optimizations may convert them into quiet NaN and that trapping needs to be enabled (e.g. via −ffpe−trap).
By default, gfortran enforces proper alignment of all variables in a "COMMON" block by padding them as needed. On certain platforms this is mandatory, on others it increases performance. If a "COMMON" block is not declared with consistent data types everywhere, this padding can cause trouble, and −fno−align−commons can be used to disable automatic alignment. The same form of this option should be used for all files that share a "COMMON" block. To avoid potential alignment issues in "COMMON" blocks, it is recommended to order objects from largest to smallest.
By default the parentheses in expression are honored for all optimization levels such that the compiler does not do any re-association. Using −fno−protect−parens allows the compiler to reorder "REAL" and "COMPLEX" expressions to produce faster code. Note that for the re-association optimization −fno−signed−zeros and −fno−trapping−math need to be in effect.
An allocatable left-hand side of an intrinsic assignment is automatically (re)allocated if it is either unallocated or has a different shape. The option is enabled by default except when −std=f95 is given.
The gfortran compiler currently does not make use of any environment variables to control its operation above and beyond those that affect the operation of gcc.
For instructions on reporting bugs, see <http://bugs.opensuse.org/>.
See the Info entry for gfortran for contributors to GCC and GNU Fortran.
Copyright (c) 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with the Invariant Sections being "Funding Free Software", the Front-Cover Texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the gfdl(7) man page.
(a) The FSF ’s Front-Cover Text is:
A GNU Manual
(b) The FSF ’s Back-Cover Text is:
You have freedom to copy and modify this GNU Manual, like GNU
software. Copies published by the Free Software Foundation raise
funds for GNU development.
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.