getch


HOME

getch

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
NOTES
PORTABILITY
SEE ALSO

NAME

getch, wgetch, mvgetch, mvwgetch, ungetch, has_key − get (or push back) characters from curses terminal keyboard

SYNOPSIS

#include <ncurses/curses.h>

int getch(void);
int wgetch(WINDOW *win);
int mvgetch(int y, int x);
int mvwgetch(WINDOW *win, int y, int x);
int ungetch(int ch);
int has_key(int ch);

DESCRIPTION

The getch, wgetch, mvgetch and mvwgetch, routines read a character from the window. In no-delay mode, if no input is waiting, the value ERR is returned. In delay mode, the program waits until the system passes text through to the program. Depending on the setting of cbreak, this is after one character (cbreak mode), or after the first newline (nocbreak mode). In half-delay mode, the program waits until a character is typed or the specified timeout has been reached.

If echo is enabled, and the window is not a pad, then the character will also be echoed into the designated window according to the following rules:

If the character is the current erase character, left arrow, or backspace, the cursor is moved one space to the left and that screen position is erased as if delch had been called.

If the character value is any other KEY_ define, the user is alerted with a beep call.

If the character is a carriage-return, and if nl is enabled, it is translated to a line-feed after echoing.

Otherwise the character is simply output to the screen.

If the window is not a pad, and it has been moved or modified since the last call to wrefresh, wrefresh will be called before another character is read.

If keypad is TRUE, and a function key is pressed, the token for that function key is returned instead of the raw characters. Possible function keys are defined in <curses.h> as macros with values outside the range of 8-bit characters whose names begin with KEY_. Thus, a variable intended to hold the return value of a function key must be of short size or larger.

When a character that could be the beginning of a function key is received (which, on modern terminals, means an escape character), curses sets a timer. If the remainder of the sequence does not come in within the designated time, the character is passed through; otherwise, the function key value is returned. For this reason, many terminals experience a delay between the time a user presses the escape key and the escape is returned to the program.

The ungetch routine places ch back onto the input queue to be returned by the next call to wgetch. There is just one input queue for all windows.

Function Keys
The following function keys, defined in <curses.h>, might be returned by getch if keypad has been enabled. Note that not all of these are necessarily supported on any particular terminal.

Keypad is arranged like this:

The has_key routine takes a key value from the above list, and returns TRUE or FALSE according to whether the current terminal type recognizes a key with that value. Note that a few values do not correspond to a real key, e.g., KEY_RESIZE and KEY_MOUSE. See resizeterm(3NCURSES) for more details about KEY_RESIZE, and mouse(3NCURSES) for a discussion of KEY_MOUSE.

RETURN VALUE

All routines return the integer ERR upon failure and an integer value other than ERR (OK in the case of ungetch()) upon successful completion.

ungetch

returns ERR if there is no more room in the FIFO.

wgetch

returns ERR if the window pointer is null, or if its timeout expires without having any data.

Functions with a "mv" prefix first perform a cursor movement using wmove, and return an error if the position is outside the window, or if the window pointer is null.

NOTES

Use of the escape key by a programmer for a single character function is discouraged, as it will cause a delay of up to one second while the keypad code looks for a following function-key sequence.

Note that some keys may be the same as commonly used control keys, e.g., KEY_ENTER versus control/M, KEY_BACKSPACE versus control/H. Some curses implementations may differ according to whether they treat these control keys specially (and ignore the terminfo), or use the terminfo definitions. Ncurses uses the terminfo definition. If it says that KEY_ENTER is control/M, getch will return KEY_ENTER when you press control/M.

Generally, KEY_ENTER denotes the character(s) sent by the Enter key on the numeric keypad:

the terminal description lists the most useful keys,

the Enter key on the regular keyboard is already handled by the standard ASCII characters for carriage-return and line-feed,

depending on whether nl or nonl was called, pressing "Enter" on the regular keyboard may return either a carriage-return or line-feed, and finally

"Enter or send" is the standard description for this key.

When using getch, wgetch, mvgetch, or mvwgetch, nocbreak mode (nocbreak) and echo mode (echo) should not be used at the same time. Depending on the state of the tty driver when each character is typed, the program may produce undesirable results.

Note that getch, mvgetch, and mvwgetch may be macros.

Historically, the set of keypad macros was largely defined by the extremely function-key-rich keyboard of the AT&T 7300, aka 3B1, aka Safari 4. Modern personal computers usually have only a small subset of these. IBM PC-style consoles typically support little more than KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_HOME, KEY_END, KEY_NPAGE, KEY_PPAGE, and function keys 1 through 12. The Ins key is usually mapped to KEY_IC.

PORTABILITY

The *get* functions are described in the XSI Curses standard, Issue 4. They read single-byte characters only. The standard specifies that they return ERR on failure, but specifies no error conditions.

The echo behavior of these functions on input of KEY_ or backspace characters was not specified in the SVr4 documentation. This description is adopted from the XSI Curses standard.

The behavior of getch and friends in the presence of handled signals is unspecified in the SVr4 and XSI Curses documentation. Under historical curses implementations, it varied depending on whether the operating system’s implementation of handled signal receipt interrupts a read(2) call in progress or not, and also (in some implementations) depending on whether an input timeout or non-blocking mode has been set.

Programmers concerned about portability should be prepared for either of two cases: (a) signal receipt does not interrupt getch; (b) signal receipt interrupts getch and causes it to return ERR with errno set to EINTR. Under the ncurses implementation, handled signals never interrupt getch.

The has_key function is unique to ncurses. We recommend that any code using it be conditionalized on the NCURSES_VERSION feature macro.

SEE ALSO

ncurses(3NCURSES), inopts(3NCURSES), outopts(3NCURSES), mouse(3NCURSES), move(3NCURSES), refresh(3NCURSES), resizeterm(3NCURSES).

Comparable functions in the wide-character (ncursesw) library are described in get_wch(3NCURSES).







Opportunity


Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.





Free Software


Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.


Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.





Free Books


The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.


Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.





Education


Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.


Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.