mergecap(1)
NAME
mergecap - Merges two or more capture files into one
SYNOPSIS
mergecap [ -a ] [ -F <file format> ] [ -h ] [ -I <IDB merge mode> ] [ -s <snaplen> ] [ -v ] [ -V ] -w <outfile>|- <infile> [<infile> ...]
DESCRIPTION
Mergecap is a program that combines multiple saved capture files into a single output file specified by the -w argument. Mergecap knows how to read pcap capture files, including those of tcpdump, Wireshark, and other tools that write captures in that format. By default, Mergecap writes the capture file in pcap format, and writes all of the packets from the input capture files to the output file. Mergecap is able to detect, read and write the same capture files that are supported by Wireshark. The input files don't need a specific filename extension; the file format and an optional gzip compression will be automatically detected. Near the beginning of the DESCRIPTION section of wireshark(1) or <https://www.wireshark.org/docs/man-pages/wireshark.html> is a detailed description of the way Wireshark handles this, which is the same way Mergecap handles this. Mergecap can write the file in several output formats. The -F flag can be used to specify the format in which to write the capture file, mergecap -F provides a list of the available output formats. Packets from the input files are merged in chronological order based on each frame's timestamp, unless the -a flag is specified. Mergecap assumes that frames within a single capture file are already stored in chronological order. When the -a flag is specified, packets are copied directly from each input file to the output file, independent of each frame's timestamp. The output file frame encapsulation type is set to the type of the input files if all input files have the same type. If not all of the input files have the same frame encapsulation type, the output file type is set to WTAP_ENCAP_PER_PACKET. Note that some capture file formats, most notably pcap, do not currently support WTAP_ENCAP_PER_PACKET. This combination will cause the output file creation to fail.
OPTIONS
-a Causes the frame timestamps to be ignored, writing all packets from
the first input file followed by all packets from the second input
file. By default, when -a is not specified, the contents of the
input files are merged in chronological order based on each frame's
timestamp.
Note: when merging, mergecap assumes that packets within a capture
file are already in chronological order.
-F <file format>
Sets the file format of the output capture file. Mergecap can write
the file in several formats; mergecap -F provides a list of the
available output formats. The default is to use the file format of
the first input file.
-h Prints the version and options and exits.
-I <IDB merge mode>
Sets the Interface Description Block (IDB) merge mode to use during
merging. mergecap -I provides a list of the available IDB merge
modes.
Every input file has one or more IDBs, which describe the
interface(s) the capture was performed on originally. This includes
encapsulation type, interface name, etc. When mergecap merges
multiple input files, it has to merge these IDBs somehow for the
new merged output file. This flag controls how that is
accomplished. The currently available modes are:
* 'B<none>': no merging of IDBs is performed, and instead all IDBs are
copied to the merged output file.
* 'B<all>': IDBs are merged only if all input files have the same number
of IDBs, and each IDB matches their respective entry in the
other files. This is the default mode.
* 'B<any>': Any and all duplicate IDBs are merged into one IDB, regardless
of what file they are in.
Note that an IDB is only considered a matching duplicate if it has
the same encapsulation type, name, speed, time precision, comments,
description, etc.
-s <snaplen>
Sets the snapshot length to use when writing the data. If the -s
flag is used to specify a snapshot length, frames in the input file
with more captured data than the specified snapshot length will
have only the amount of data specified by the snapshot length
written to the output file. This may be useful if the program that
is to read the output file cannot handle packets larger than a
certain size (for example, the versions of snoop in Solaris 2.5.1
and Solaris 2.6 appear to reject Ethernet frames larger than the
standard Ethernet MTU, making them incapable of handling gigabit
Ethernet captures if jumbo frames were used).
-v Causes mergecap to print a number of messages while it's working.
-V Print the version and exit.
-w <outfile>|-
Sets the output filename. If the name is '-', stdout will be used.
This setting is mandatory.
EXAMPLES
To merge two capture files together, 100 seconds apart use:
capinfos -aeS a.pcap b.pcap
(Let's suppose a.pcap starts at 1009932757 and b.pcap ends at
873660281. 1009932757 - 873660281 - 100 = 136272376 seconds.)
editcap -t 136272376 b.pcap b-shifted.pcap
mergecap -w compare.pcap a.pcap b-shifted.pcap
SEE ALSO
pcap(3), wireshark(1), tshark(1), dumpcap(1), editcap(1), text2pcap(1), pcap-filter(7) or tcpdump(8)
NOTES
Mergecap is based heavily upon editcap by Richard Sharpe <sharpe[AT]ns.aus.com> and Guy Harris <guy[AT]alum.mit.edu>. Mergecap is part of the Wireshark distribution. The latest version of Wireshark can be found at <https://www.wireshark.org>. HTML versions of the Wireshark project man pages are available at: <https://www.wireshark.org/docs/man-pages>.
AUTHORS
Original Author
-------- ------
Scott Renfro <scott[AT]renfro.org>
Contributors
------------
Bill Guyton <guyton[AT]bguyton.com>
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
