ospf6d(8)


NAME

   ospf6d - an OSPFv3 routing engine for use with Quagga routing software.

SYNOPSIS

   ospf6d [ -dhv ] [ -f config-file ] [ -i pid-file ] [ -P port-number ] [
   -A vty-address ] [ -u user ] [ -g group ]

DESCRIPTION

   ospf6d is a routing  component  that  works  with  the  Quagga  routing
   engine.

OPTIONS

   Options available for the ospf6d command:

OPTIONS

   -d, --daemon
          Runs in daemon mode, forking and exiting from tty.

   -f, --config-file config-file
          Specifies  the  config file to use for startup. If not specified
          this option will likely default to /usr/local/etc/ospf6d.conf.

   -g, --group group
          Specify the group to run as. Default is quagga.

   -h, --help
          A brief message.

   -i, --pid_file pid-file
          When ospf6d starts its process identifier  is  written  to  pid-
          file.   The init system uses the recorded PID to stop or restart
          ospf6d.  The likely default is /var/run/ospf6d.pid.

   -P, --vty_port port-number
          Specify the port that  the  ospf6d  VTY  will  listen  on.  This
          defaults to 2606, as specified in /etc/services.

   -A, --vty_addr vty-address
          Specify  the address that the ospf6d VTY will listen on. Default
          is all interfaces.

   -u, --user user
          Specify the user to run as. Default is quagga.

   -v, --version
          Print the version and exit.

FILES

   /usr/local/sbin/ospf6d
          The default location of the ospf6d binary.

   /usr/local/etc/ospf6d.conf
          The default location of the ospf6d config file.

   $(PWD)/ospf6d.log
          If the ospf6d process is config'd to output logs to a file, then
          you  will  find  this  file  in  the directory where you started
          ospf6d.

WARNING

   This man page is intended to be a  quick  reference  for  command  line
   options. The definitive document is the Info file Quagga.

DIAGNOSTICS

   The ospf6d process may log to standard output, to a VTY, to a log file,
   or through syslog to the system logs. ospf6d  supports  many  debugging
   options, see the Info file, or the source for details.

SEE ALSO

   bgpd(8), ripd(8), ripngd(8), ospfd(8), isisd(8), zebra(8), vtysh(1)

BUGS

   ospf6d  eats  bugs  for breakfast. If you have food for the maintainers
   try http://bugzilla.quagga.net

AUTHORS

   See http://www.zebra.org and http://www.quagga.net or the Info file for
   an accurate list of authors.


More Linux Commands

manpages/XtChangeManagedSet.3.html
XtChangeManagedSet(3) - manage and unmanage children........
The XtManageChildren function performs the following: * Issues an error if the children do not all have the same parent or if the parent is not a subclass of co

manpages/imon.8.html
imon.8 (Manual - Linux man page)...........................
imon is a ncurses based utility for watching ISDN activity. OPTIONS -q If this option is given, the facility of terminatig the program by pressing Q is disabled

manpages/SDL_CDtrack.3.html
SDL_CDtrack(3) - CD Track Information Structure (Man Page)
SDL_CDtrack stores data on each track on a CD, its fields should be pretty self explainatory. It is a member a the SDL_CD structure. Note: Frames can be convert

manpages/glEvalMesh.3gl.html
glEvalMesh(3gl) - compute a one- or two-dimensional grid of
glMapGrid and glEvalMesh are used in tandem to efficiently generate and evaluate a series of evenly-spaced map domain values. glEvalMesh steps through the integ

manpages/perlutil.1.html
perlutil(1) - utilities packaged with the Perl distribution
Along with the Perl interpreter itself, the Perl distribution installs a range of utilities on your system. There are also several utilities which are used by t

manpages/XIGrabEnter.3.html
XIGrabEnter(3) - grab/ungrab enter or focus in events.......
XIGrabEnter and XIGrabFocusIn establish a passive grab. The modifier device for a enter grab is the paired master device if deviceid specifies a master pointer.

manpages/acecad.4.html
acecad(4) - Acecad Flair input driver - Linux manual page...
acecad is an Xorg input driver for Acecad Flair devices... The acecad driver functions as a pointer input device, and may be used as the X servers core pointer.

manpages/Tcl_RestoreResult.3.html
Tcl_RestoreResult(3) - save and restore an interpreter's sta
These routines allows a C procedure to take a snapshot of the current │ state of an interpreter so that it can be restored after a call to │ Tcl_Eva

manpages/nmbd.8.html
nmbd(8) - NetBIOS name server to provide NetBIOS over IP nam
This program is part of the samba(7) suite. nmbd is a server that understands and can reply to NetBIOS over IP name service requests, like those produced by SMB

manpages/lnstat.8.html
lnstat(8) - unified linux network statistics (Man Page).....
This manual page documents briefly the lnstat command. lnstat is a generalized and more feature-complete replacement for the old rtstat program. In addition to

manpages/XML::DOM::CharacterData.3pm.html
XML::DOM::CharacterData(3pm) - Common interface for Text, CD
XML::DOM::CharacterData extends XML::DOM::Node The CharacterData interface extends Node with a set of attributes and methods for accessing character data in the

manpages/string.n.html
string(n) - Manipulate strings (Local - Linux man page).....
Performs one of several string operations, depending on option. The legal options (which may be abbreviated) are: string cat ?string1? ?string2...? Concatenate





We can't live, work or learn in freedom unless the software we use is free.