syslinux(1)
NAME
syslinux - install the SYSLINUX bootloader on a FAT filesystem
SYNOPSIS
syslinux [OPTIONS] device
DESCRIPTION
Syslinux is a boot loader for the Linux operating system which operates
off an MS-DOS/Windows FAT filesystem. It is intended to simplify first-
time installation of Linux, and for creation of rescue and other
special-purpose boot disks.
In order to create a bootable Linux floppy using Syslinux, prepare a
normal MS-DOS formatted floppy. Copy one or more Linux kernel files to
it, then execute the command:
syslinux --install /dev/fd0
This will alter the boot sector on the disk and copy a file named
ldlinux.sys into its root directory.
On boot time, by default, the kernel will be loaded from the image
named LINUX on the boot floppy. This default can be changed, see the
section on the syslinux configuration file.
If the Shift or Alt keys are held down during boot, or the Caps or
Scroll locks are set, syslinux will display a lilo(8) -style "boot:"
prompt. The user can then type a kernel file name followed by any
kernel parameters. The SYSLINUX bootloader does not need to know about
the kernel file in advance; all that is required is that it is a file
located in the root directory on the disk.
Syslinux supports the loading of initial ramdisks (initrd) and the
bzImage kernel format.
OPTIONS
-i, --install
Install SYSLINUX on a new medium, overwriting any previously
installed bootloader.
-U, --update
Install SYSLINUX on a new medium if and only if a version of
SYSLINUX is already installed.
-s, --stupid
Install a "safe, slow and stupid" version of SYSLINUX. This
version may work on some very buggy BIOSes on which SYSLINUX
would otherwise fail. If you find a machine on which the -s
option is required to make it boot reliably, please send as much
info about your machine as you can, and include the failure
mode.
-f, --force
Force install even if it appears unsafe.
-r, --raid
RAID mode. If boot fails, tell the BIOS to boot the next device
in the boot sequence (usually the next hard disk) instead of
stopping with an error message. This is useful for RAID-1
booting.
-d, --directory subdirectory
Install the SYSLINUX control files in a subdirectory with the
specified name (relative to the root directory on the device).
-t, --offset offset
Indicates that the filesystem is at an offset from the base of
the device or file.
--once command
Declare a boot command to be tried on the first boot only.
-O, --clear-once
Clear the boot-once command.
-H, --heads head-count
Override the detected number of heads for the geometry.
-S, --sectors sector-count
Override the detected number of sectors for the geometry.
-z, --zipdrive
Assume zipdrive geometry (--heads 64 --sectors 32).
FILES
Configuration file
All the configurable defaults in SYSLINUX can be changed by putting a
file called syslinux.cfg in the install directory of the boot disk.
This is a text file in either UNIX or DOS format, containing one or
more of the following items (case is insensitive for keywords).
This list is out of date.
In the configuration file blank lines and comment lines beginning with
a hash mark (#) are ignored.
default kernel [ options ... ]
Sets the default command line. If syslinux boots automatically,
it will act just as if the entries after "default" had been
typed in at the "boot:" prompt.
If no DEFAULT or UI statement is found, or the configuration
file is missing entirely, SYSLINUX drops to the boot: prompt
with an error message (if NOESCAPE is set, it stops with a "boot
failed" message; this is also the case for PXELINUX if the
configuration file is not found.)
NOTE: Until SYSLINUX 3.85, if no configuration file is present, or no
"default" entry is present in the configuration file, the
default is "linux auto".
Even earlier versions of SYSLINUX used to automatically
append the string "auto" to whatever the user specified using
the DEFAULT command. As of version 1.54, this is no longer
true, as it caused problems when using a shell as a substitute
for "init." You may want to include this option manually.
append options ...
Add one or more options to the kernel command line. These are
added both for automatic and manual boots. The options are added
at the very beginning of the kernel command line, usually
permitting explicitly entered kernel options to override them.
This is the equivalent of the lilo(8)
"append" option.
label label
kernel image
append options ...
Indicates that if label is entered as the kernel to boot,
syslinux should instead boot image, and the specified "append"
options should be used instead of the ones specified in the
global section of the file (before the first "label" command.)
The default for image is the same as label, and if no "append"
is given the default is to use the global entry (if any). Use
"append -" to use no options at all. Up to 128 "label" entries
are permitted.
The "image" doesn't have to be a Linux kernel; it can be
a boot sector (see below.)
implicit flag_val
If flag_val is 0, do not load a kernel image unless it has been
explicitly named in a "label" statement. The default is 1.
timeout timeout
Indicates how long to wait at the "boot:" prompt until booting
automatically, in units of 1/10 s. The timeout is cancelled as
soon as the user types anything on the keyboard, the assumption
being that the user will complete the command line already
begun. A timeout of zero will disable the timeout completely,
this is also the default. The maximum possible timeout value is
35996; corresponding to just below one hour.
serial port [ baudrate ]
Enables a serial port to act as the console. "port" is a number
(0 = /dev/ttyS0 = COM1, etc.); if "baudrate" is omitted, the
baud rate defaults to 9600 bps. The serial parameters are
hardcoded to be 8 bits, no parity, 1 stop bit.
For this directive to be guaranteed to work properly, it should
be the first directive in the configuration file.
font filename
Load a font in .psf format before displaying any output (except
the copyright line, which is output as ldlinux.sys itself is
loaded.) syslinux only loads the font onto the video card; if
the .psf file contains a Unicode table it is ignored. This only
works on EGA and VGA cards; hopefully it should do nothing on
others.
kbdmap keymap
Install a simple keyboard map. The keyboard remapper used is
very simplistic (it simply remaps the keycodes received from the
BIOS, which means that only the key combinations relevant in the
default layout - usually U.S. English - can be mapped) but
should at least help people with AZERTY keyboard layout and the
locations of = and , (two special characters used heavily on the
Linux kernel command line.)
The included program keytab-lilo.pl(8) from the lilo(8)
distribution can be used to create such keymaps.
display filename
Displays the indicated file on the screen at boot time (before
the boot: prompt, if displayed). Please see the section below on
DISPLAY files. If the file is missing, this option is simply
ignored.
prompt flag_val
If flag_val is 0, display the "boot:" prompt only if the Shift
or Alt key is pressed, or Caps Lock or Scroll lock is set (this
is the default). If flag_val is 1, always display the "boot:"
prompt.
f1 filename
f2 filename
...
f9 filename
f10 filename
f11 filename
f12 filename
Displays the indicated file on the screen when a function key is
pressed at the "boot:" prompt. This can be used to implement
pre-boot online help (presumably for the kernel command line
options.)
When using the serial console, press <Ctrl-F><digit> to get to
the help screens, e.g. <Ctrl-F>2 to get to the f2 screen. For
f10-f12, hit <Ctrl-F>A, <Ctrl-F>B, <Ctrl-F>C. For compatiblity
with earlier versions, f10 can also be entered as <Ctrl-F>0.
Display file format
DISPLAY and function-key help files are text files in either DOS or
UNIX format (with or without <CR>). In addition, the following special
codes are interpreted:
<FF> = <Ctrl-L> = ASCII 12
Clear the screen, home the cursor. Note that the screen is
filled with the current display color.
<SI><bg><fg>, <SI> = <Ctrl-O> = ASCII 15
Set the display colors to the specified background and
foreground colors, where <bg> and <fg> are hex digits,
corresponding to the standard PC display attributes:
0 = black 8 = dark grey
1 = dark blue 9 = bright blue
2 = dark green a = bright green
3 = dark cyan b = bright cyan
4 = dark red c = bright red
5 = dark purple d = bright purple
6 = brown e = yellow
7 = light grey f = white
Picking a bright color (8-f) for the background results in the
corresponding dark color (0-7), with the foreground flashing.
colors are not visible over the serial console.
<CAN>filename<newline>, <CAN> = <Ctrl-X> = ASCII 24
If a VGA display is present, enter graphics mode and display the
graphic included in the specified file. The file format is an
ad hoc format called LSS16; the included Perl program
"ppmtolss16" can be used to produce these images. This Perl
program also includes the file format specification.
The image is displayed in 640x480 16-color mode. Once in
graphics mode, the display attributes (set by <SI> code
sequences) work slightly differently: the background color is
ignored, and the foreground colors are the 16 colors specified
in the image file. For that reason, ppmtolss16 allows you to
specify that certain colors should be assigned to specific color
indicies.
Color indicies 0 and 7, in particular, should be chosen with
care: 0 is the background color, and 7 is the color used for the
text printed by SYSLINUX itself.
<EM>, <EM> = <Ctrl-U> = ASCII 25
If we are currently in graphics mode, return to text mode.
<DLE>..<ETB>, <Ctrl-P>..<Ctrl-W> = ASCII 16-23
These codes can be used to select which modes to print a certain
part of the message file in. Each of these control characters
select a specific set of modes (text screen, graphics screen,
serial port) for which the output is actually displayed:
Character Text Graph Serial
------------------------------------------------------
<DLE> = <Ctrl-P> = ASCII 16 No No No
<DC1> = <Ctrl-Q> = ASCII 17 Yes No No
<DC2> = <Ctrl-R> = ASCII 18 No Yes No
<DC3> = <Ctrl-S> = ASCII 19 Yes Yes No
<DC4> = <Ctrl-T> = ASCII 20 No No Yes
<NAK> = <Ctrl-U> = ASCII 21 Yes No Yes
<SYN> = <Ctrl-V> = ASCII 22 No Yes Yes
<ETB> = <Ctrl-W> = ASCII 23 Yes Yes Yes
For example:
<DC1>Text mode<DC2>Graphics mode<DC4>Serial port<ETB>
... will actually print out which mode the console is in!
<SUB> = <Ctrl-Z> = ASCII 26
End of file (DOS convention).
Other operating systems
This version of syslinux supports chain loading of other operating
systems (such as MS-DOS and its derivatives, including Windows 95/98).
Chain loading requires the boot sector of the foreign operating system
to be stored in a file in the root directory of the filesystem.
Because neither Linux kernels, nor boot sector images have reliable
magic numbers, syslinux will look at the file extension. The following
extensions are recognised:
none or other Linux kernel image
BSS Boot sector (DOS superblock will be patched in)
BS Boot sector
For filenames given on the command line, syslinux will search for the
file by adding extensions in the order listed above if the plain
filename is not found. Filenames in KERNEL statements must be fully
qualified.
Novice protection
Syslinux will attempt to detect if the user is trying to boot on a 286
or lower class machine, or a machine with less than 608K of low ("DOS")
RAM (which means the Linux boot sequence cannot complete). If so, a
message is displayed and the boot sequence aborted. Holding down the
Ctrl key while booting disables this feature.
The compile time and date of a specific syslinux version can be
obtained by the DOS command "type ldlinux.sys". This is also used as
the signature for the LDLINUX.SYS file, which must match the boot
sector
Any file that syslinux uses can be marked hidden, system or readonly if
so is convenient; syslinux ignores all file attributes. The SYSLINUX
installed automatically sets the readonly attribute on LDLINUX.SYS.
Bootable CD-ROMs
SYSLINUX can be used to create bootdisk images for El Torito-compatible
bootable CD-ROMs. However, it appears that many BIOSes are very buggy
when it comes to booting CD-ROMs. Some users have reported that the
following steps are helpful in making a CD-ROM that is bootable on the
largest possible number of machines:
* Use the -s (safe, slow and stupid) option to SYSLINUX
* Put the boot image as close to the beginning of the ISO 9660
filesystem as possible.
A CD-ROM is so much faster than a floppy that the -s option shouldn't
matter from a speed perspective.
Of course, you probably want to use ISOLINUX instead. See the
documentation file isolinux.doc.
Booting from a FAT partition on a hard disk
SYSLINUX can boot from a FAT filesystem partition on a hard disk
(including FAT32). The installation procedure is identical to the
procedure for installing it on a floppy, and should work under either
DOS or Linux. To boot from a partition, SYSLINUX needs to be launched
from a Master Boot Record or another boot loader, just like DOS itself
would. A sample master boot sector (mbr.bin) is included with SYSLINUX.
BUGS
I would appreciate hearing of any problems you have with SYSLINUX. I would also like to hear from you if you have successfully used SYSLINUX, especially if you are using it for a distribution. If you are reporting problems, please include all possible information about your system and your BIOS; the vast majority of all problems reported turn out to be BIOS or hardware bugs, and I need as much information as possible in order to diagnose the problems. There is a mailing list for discussion among SYSLINUX users and for announcements of new and test versions. To join, send a message to majordomo@linux.kernel.org with the line: subscribe syslinux in the body of the message. The submission address is syslinux@linux.kernel.org.
SEE ALSO
lilo(8), keytab-lilo.pl(8), fdisk(8), mkfs(8), superformat(1).
AUTHOR
This manual page is a modified version of the original syslinux documentation by H. Peter Anvin <hpa@zytor.com>. The conversion to a manpage was made by Arthur Korn <arthur@korn.ch>.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
