dlmopen(3)


NAME

   dlclose, dlopen, dlmopen - open and close a shared object

SYNOPSIS

   #include <dlfcn.h>

   void *dlopen(const char *filename, int flags);

   int dlclose(void *handle);

   #define _GNU_SOURCE
   #include <dlfcn.h>

   void *dlmopen (Lmid_t lmid, const char *filename, int flags);

   Link with -ldl.

DESCRIPTION

   dlopen()
   The  function dlopen() loads the dynamic shared object (shared library)
   file named by the null-terminated string filename and returns an opaque
   "handle"  for  the  loaded  object.  This handle is employed with other
   functions in the dlopen API, such as  dlsym(3),  dladdr(3),  dlinfo(3),
   and dlclose().

   If  filename is NULL, then the returned handle is for the main program.
   If filename contains a  slash  ("/"),  then  it  is  interpreted  as  a
   (relative   or  absolute)  pathname.   Otherwise,  the  dynamic  linker
   searches for the object as follows (see ld.so(8) for further details):

   o   (ELF only) If the executable file for the calling program  contains
       a  DT_RPATH  tag,  and  does not contain a DT_RUNPATH tag, then the
       directories listed in the DT_RPATH tag are searched.

   o   If, at the time that  the  program  was  started,  the  environment
       variable  LD_LIBRARY_PATH  was defined to contain a colon-separated
       list of directories, then  these  are  searched.   (As  a  security
       measure,  this variable is ignored for set-user-ID and set-group-ID
       programs.)

   o   (ELF only) If the executable file for the calling program  contains
       a  DT_RUNPATH  tag,  then  the  directories  listed in that tag are
       searched.

   o   The cache file  /etc/ld.so.cache  (maintained  by  ldconfig(8))  is
       checked to see whether it contains an entry for filename.

   o   The directories /lib and /usr/lib are searched (in that order).

   If  the  object  specified by filename has dependencies on other shared
   objects, then these are also automatically loaded by the dynamic linker
   using  the  same  rules.  (This process may occur recursively, if those
   objects in turn have dependencies, and so on.)

   One of the following two values must be included in flags:

   RTLD_LAZY
          Perform lazy binding.  Resolve symbols only  as  the  code  that
          references them is executed.  If the symbol is never referenced,
          then it is never resolved.  (Lazy binding is performed only  for
          function   references;   references   to  variables  are  always
          immediately bound when the  shared  object  is  loaded.)   Since
          glibc  2.1.1,  this  flag  is  overridden  by  the effect of the
          LD_BIND_NOW environment variable.

   RTLD_NOW
          If  this  value  is  specified,  or  the  environment   variable
          LD_BIND_NOW  is  set to a nonempty string, all undefined symbols
          in the shared object are resolved before dlopen()  returns.   If
          this cannot be done, an error is returned.

   Zero or more of the following values may also be ORed in flags:

   RTLD_GLOBAL
          The symbols defined by this shared object will be made available
          for symbol resolution of subsequently loaded shared objects.

   RTLD_LOCAL
          This is the converse of RTLD_GLOBAL, and the default if  neither
          flag  is  specified.   Symbols defined in this shared object are
          not made available to resolve references in subsequently  loaded
          shared objects.

   RTLD_NODELETE (since glibc 2.2)
          Do not unload the shared object during dlclose().  Consequently,
          the object's static  variables  are  not  reinitialized  if  the
          object is reloaded with dlopen() at a later time.

   RTLD_NOLOAD (since glibc 2.2)
          Don't  load  the shared object.  This can be used to test if the
          object is already resident (dlopen() returns NULL if it is  not,
          or  the  object's handle if it is resident).  This flag can also
          be used to promote the flags on a shared object that is  already
          loaded.  For example, a shared object that was previously loaded
          with RTLD_LOCAL can be reopened with RTLD_NOLOAD | RTLD_GLOBAL.

   RTLD_DEEPBIND (since glibc 2.3.4)
          Place the lookup scope of the  symbols  in  this  shared  object
          ahead  of  the  global  scope.  This means that a self-contained
          object will use its own symbols in preference to global  symbols
          with  the  same name contained in objects that have already been
          loaded.

   If filename is NULL, then the returned handle is for the main  program.
   When  given to dlsym(), this handle causes a search for a symbol in the
   main program, followed by all shared objects loaded at program startup,
   and   then  all  shared  objects  loaded  by  dlopen()  with  the  flag
   RTLD_GLOBAL.

   External references in the shared object are resolved using the  shared
   objects  in  that  object's  dependency  list  and  any  other  objects
   previously opened with the RTLD_GLOBAL flag.   If  the  executable  was
   linked     with     the    flag    "-rdynamic"    (or,    synonymously,
   "--export-dynamic"), then the global symbols  in  the  executable  will
   also  be  used  to  resolve  references  in a dynamically loaded shared
   object.

   If the same shared object is  loaded  again  with  dlopen(),  the  same
   object  handle  is  returned.   The  dynamic linker maintains reference
   counts for object handles, so a dynamically loaded shared object is not
   deallocated  until  dlclose()  has  been  called on it as many times as
   dlopen() has succeeded on it.  Any initialization returns  (see  below)
   are  called  just once.  However, a subsequent dlopen() call that loads
   the same shared object with RTLD_NOW may force symbol resolution for  a
   shared object earlier loaded with RTLD_LAZY.

   If dlopen() fails for any reason, it returns NULL.

   dlmopen()
   This function performs the same task as dlopen()—the filename and flags
   arguments, as well as the return value, are the same,  except  for  the
   differences noted below.

   The  dlmopen()  function  differs  from  dlopen()  primarily in that it
   accepts an additional argument, lmid, that specifies the link-map  list
   (also  referred to as a namespace) in which the shared object should be
   loaded.  (By comparison, dlopen() adds the  dynamically  loaded  shared
   object  to  the  same  namespace  as  the  shared object from which the
   dlopen() call is made.)  The Lmid_t  type  is  an  opaque  handle  that
   refers to a namespace.

   The  lmid argument is either the ID of an existing namespace (which can
   be obtained using the dlinfo(3) RTLD_DI_LMID request)  or  one  of  the
   following special values:

   LM_ID_BASE
          Load  the  shared  object  in  the  initial namespace (i.e., the
          application's namespace).

   LM_ID_NEWLM
          Create a new namespace  and  load  the  shared  object  in  that
          namespace.   The  object  must  have  been  correctly  linked to
          reference all of the other  shared  objects  that  it  requires,
          since the new namespace is initially empty.

   If  filename  is  NULL,  then  the  only  permitted  value  for lmid is
   LM_ID_BASE.

   dlclose()
   The  function  dlclose()  decrements  the  reference   count   on   the
   dynamically  loaded  shared  object  referred  to  by  handle.   If the
   reference count drops to zero, then the object is unloaded.  All shared
   objects that were automatically loaded when dlopen() was invoked on the
   object referred to by handle are recursively closed in the same manner.

   A successful return from dlclose() does not guarantee that the  symbols
   associated with handle are removed from the caller's address space.  In
   addition to references resulting from explicit dlopen() calls, a shared
   object  may have been implicitly loaded (and reference counted) because
   of dependencies in other shared objects.  Only when all references have
   been released can the shared object be removed from the address space.

RETURN VALUE

   On  success,  dlopen()  and  dlmopen() return a non-NULL handle for the
   loaded library.  On error (file could not be found, was  not  readable,
   had the wrong format, or caused errors during loading), these functions
   return NULL.

   On success, dlclose() returns 0; on error, it returns a nonzero value.

   Errors from these functions can be diagnosed using dlerror(3).

VERSIONS

   dlopen() and dlclose() are present in glibc 2.0 and  later.   dlmopen()
   first appeared in glibc 2.3.4.

ATTRIBUTES

   For   an   explanation   of   the  terms  used  in  this  section,  see
   attributes(7).

   ┌───────────────────────────────┬───────────────┬─────────┐
   │InterfaceAttributeValue   │
   ├───────────────────────────────┼───────────────┼─────────┤
   │dlopen(), dlmopen(), dlclose() │ Thread safety │ MT-Safe │
   └───────────────────────────────┴───────────────┴─────────┘

CONFORMING TO

   POSIX.1-2001 describes dlclose() and dlopen().  The dlmopen()  function
   is a GNU extension.

   The   RTLD_NOLOAD,  RTLD_NODELETE,  and  RTLD_DEEPBIND  flags  are  GNU
   extensions; the first two of these flags are also present on Solaris.

NOTES

   dlmopen() and namespaces
   A link-map list defines an isolated namespace  for  the  resolution  of
   symbols  by  the  dynamic linker.  Within a namespace, dependent shared
   objects are implicitly loaded according to the usual rules, and  symbol
   references are likewise resolved according to the usual rules, but such
   resolution is confined to the definitions provided by the objects  that
   have been (explicitly and implicitly) loaded into the namespace.

   The  dlmopen()  function  permits  object-load isolation—the ability to
   load a shared object in a new namespace without exposing  the  rest  of
   the  application to the symbols made available by the new object.  Note
   that the use of the RTLD_LOCAL flag is not sufficient for this purpose,
   since it prevents a shared object's symbols from being available to any
   other shared object.  In some cases, we may want to  make  the  symbols
   provided  by  a dynamically loaded shared object available to (a subset
   of) other shared objects without exposing those symbols to  the  entire
   application.   This  can  be achieved by using a separate namespace and
   the RTLD_GLOBAL flag.

   The dlmopen() function also can be used  to  provide  better  isolation
   than  the  RTLD_LOCAL  flag.  In particular, shared objects loaded with
   RTLD_LOCAL may be promoted to RTLD_GLOBAL if they are  dependencies  of
   another  shared  object  loaded  with RTLD_GLOBAL.  Thus, RTLD_LOCAL is
   insufficient to isolate a loaded shared object except in the (uncommon)
   case   where   one   has   explicit  control  over  all  shared  object
   dependencies.

   Possible uses of dlmopen() are plugins where the author of the  plugin-
   loading  framework can't trust the plugin authors and does not wish any
   undefined symbols from the plugin framework to be  resolved  to  plugin
   symbols.   Another  use  is  to  load  the  same object more than once.
   Without the use of  dlmopen(),  this  would  require  the  creation  of
   distinct  copies  of the shared object file.  Using dlmopen(), this can
   be achieved by loading the  same  shared  object  file  into  different
   namespaces.

   The glibc implementation supports a maximum of 16 namespaces.

   Initialization and finalization functions
   Shared      objects      may     export     functions     using     the
   __attribute__((constructor)) and  __attribute__((destructor))  function
   attributes.    Constructor   functions  are  executed  before  dlopen()
   returns,  and  destructor  functions  are  executed  before   dlclose()
   returns.    A  shared  object  may  export  multiple  constructors  and
   destructors, and priorities can be associated  with  each  function  to
   determine the order in which they are executed.  See the gcc info pages
   (under "Function attributes") for further information.

   An older method of (partially) achieving the same result is via the use
   of two special symbols recognized by the linker: _init and _fini.  If a
   dynamically loaded shared object exports a routine named _init(),  then
   that  code  is  executed after loading a shared object, before dlopen()
   returns.  If the shared object exports a routine  named  _fini(),  then
   that  routine  is  called  just before the object is unloaded.  In this
   case, one must avoid linking against the system  startup  files,  which
   contain  default versions of these files; this can be done by using the
   gcc(1) -nostartfiles command-line option.

   Use of _init and _fini is now deprecated in favor of the aforementioned
   constructors  and  destructors,  which  among  other advantages, permit
   multiple initialization and finalization functions to be defined.

   Since glibc 2.2.3, atexit(3) can be used to register  an  exit  handler
   that is automatically called when a shared object is unloaded.

   History
   These functions are part of the dlopen API, derived from SunOS.

BUGS

   As  at  glibc  2.24,  specifying  the  RTLD_GLOBAL  flag  when  calling
   dlmopen() generates an error.  Furthermore, specifying RTLD_GLOBAL when
   calling  dlopen()  results  in a program crash (SIGSEGV) if the call is
   made from any object loaded in  a  namespace  other  than  the  initial
   namespace.

EXAMPLE

   The  program below loads the (glibc) math library, looks up the address
   of the cos(3) function, and prints the cosine of 2.0.  The following is
   an example of building and running the program:

       $ cc dlopen_demo.c -ldl
       $ ./a.out
       -0.416147

   Program source
   #include <stdio.h>
   #include <stdlib.h>
   #include <dlfcn.h>
   #include <gnu/lib-names.h>  /* Defines LIBM_SO (which will be a
                                  string such as "libm.so.6") */
   int
   main(void)
   {
       void *handle;
       double (*cosine)(double);
       char *error;

       handle = dlopen(LIBM_SO, RTLD_LAZY);
       if (!handle) {
           fprintf(stderr, "%s\n", dlerror());
           exit(EXIT_FAILURE);
       }

       dlerror();    /* Clear any existing error */

       cosine = (double (*)(double)) dlsym(handle, "cos");

       /* According to the ISO C standard, casting between function
          pointers and 'void *', as done above, produces undefined results.
          POSIX.1-2003 and POSIX.1-2008 accepted this state of affairs and
          proposed the following workaround:

              *(void **) (&cosine) = dlsym(handle, "cos");

          This (clumsy) cast conforms with the ISO C standard and will
          avoid any compiler warnings.

          The 2013 Technical Corrigendum to POSIX.1-2008 (a.k.a.
          POSIX.1-2013) improved matters by requiring that conforming
          implementations support casting 'void *' to a function pointer.
          Nevertheless, some compilers (e.g., gcc with the '-pedantic'
          option) may complain about the cast used in this program. */

       error = dlerror();
       if (error != NULL) {
           fprintf(stderr, "%s\n", error);
           exit(EXIT_FAILURE);
       }

       printf("%f\n", (*cosine)(2.0));
       dlclose(handle);
       exit(EXIT_SUCCESS);
   }

SEE ALSO

   ld(1),  ldd(1),  pldd(1),  dl_iterate_phdr(3),  dladdr(3),  dlerror(3),
   dlinfo(3), dlsym(3), rtld-audit(7), ld.so(8), ldconfig(8)

   gcc info pages, ld info pages

COLOPHON

   This page is part of release 4.09 of the Linux  man-pages  project.   A
   description  of  the project, information about reporting bugs, and the
   latest    version    of    this    page,    can     be     found     at
   https://www.kernel.org/doc/man-pages/.





Opportunity


Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.





Free Software


Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.


Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.





Free Books


The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.


Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.





Education


Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.


Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.