dvigif(1)
NAME
dvipng - A DVI-to-PNG translator
SYNOPSIS
dvipng [options] filename dvipng [options] [filename] -
DESCRIPTION
This program makes PNG and/or GIF graphics from DVI files as obtained
from TeX and its relatives.
If GIF support is enabled, GIF output is chosen by using the dvigif
binary or with the --gif option.
The benefits of dvipng/dvigif include
* Speed. It is a very fast bitmap-rendering code for DVI files, which
makes it suitable for generating large amounts of images on-the-
fly, as needed in preview-latex, WeBWorK and others.
* It does not read the postamble, so it can be started before TeX
finishes. There is a --follow switch that makes dvipng wait at end-
of-file for further output, unless it finds the POST marker that
indicates the end of the DVI.
* Interactive query of options. dvipng can read options interactively
through stdin, and all options are usable. It is even possible to
change the input file through this interface.
* Supports PK, VF, PostScript Type1, and TrueType fonts, subfonts
(i.e., as used in CJK-LaTeX), color specials, and inclusion of
PostScript, PNG, JPEG or GIF images.
* and more...
OPTIONS
Many of the parameterless options listed here can be turned off by
suffixing the option with a zero (0); for instance, to turn off page
reversal, use -r0. Such options are marked with a trailing *.
- Read additional options from standard input after processing the
command line.
--help
Print a usage message and exit.
--version
Print the version number and exit.
-bd num
-bd color_spec
-bd 'num color_spec'
Set the pixel width of the transparent border (default 0). Using
this option will make the image edges transparent, but it only
affects pixels with the background color. Giving a color_spec will
set the fallback color, to be used in viewers that cannot handle
transparency (the default is the background color). The color spec
should be in TeX color \special syntax, e.g., 'rgb 1.0 0.0 0.0'.
Setting the fallback color makes the default border width 1 px.
--bdpi num
This option only has an effect when using bitmapped (PK) fonts. The
option sets the base (Metafont) resolution, both horizontal and
vertical, to num dpi (dots per inch). This option is necessary when
manually selecting Metafont mode with the --mode option (see
below).
-bg color_spec
Choose background color for the images. This option will be ignored
if there is a background color \special in the DVI. The color spec
should be in TeX color \special syntax, e.g., 'rgb 1.0 0.0 0.0'.
You can also specify 'Transparent' or 'transparent' which will give
you a transparent background with the normal background as a
fallback color. A capitalized 'Transparent' will give a full-alpha
transparency, while an all-lowercase 'transparent' will give a
simple fully transparent background with non-transparent
antialiased pixels. The latter would be suitable for viewers who
cannot cope with a true alpha channel. GIF images do not support
full alpha transparency, so in case of GIF output, both variants
will use the latter behaviour.
-d num
Set the debug flags, showing what dvipng (thinks it) is doing. This
will work unless dvipng has been compiled without the "DEBUG"
option (not recommended). Set the flags as you need them, use -d -1
as the first option for maximum output.
-D num
Set the output resolution, both horizontal and vertical, to num dpi
(dots per inch).
One may want to adjust this to fit a certain text font size (e.g.,
on a web page), and for a text font height of font_px pixels (in
Mozilla) the correct formula is
<dpi> = <font_px> * 72.27 / 10 [px * TeXpt/in / TeXpt]
The last division by ten is due to the standard font height 10pt in
your document, if you use 12pt, divide by 12. Unfortunately, some
proprietary browsers have font height in pt (points), not pixels.
You have to rescale that to pixels, using the screen resolution
(default is usually 96 dpi) which means the formula is
<font_px> = <font_pt> * 96 / 72 [pt * px/in / (pt/in)]
On some high-res screens, the value is instead 120 dpi. Good luck!
--depth*
Report the depth of the image. This only works reliably when the
LaTeX style preview.sty from preview-latex is used with the active
option. It reports the number of pixels from the bottom of the
image to the baseline of the image. This can be used for vertical
positioning of the image in, e.g., web documents, where one would
use (Cascading StyleSheets 1)
<IMG SRC="<filename.png>" STYLE="vertical-align: -<depth>px">
The depth is a negative offset in this case, so the minus sign is
necessary, and the unit is pixels (px).
--dvinum*
Set this option to make the output page number be the TeX page
numbers rather than the physical page number. See the -o switch.
-fg color_spec
Choose foreground color for the images. This option will be ignored
if there is a foreground color \special in the DVI. The color spec
should be in TeX color \special syntax, e.g., 'rgb 1.0 0.0 0.0'.
--follow*
Wait for data at end-of-file. One of the benefits of dvipng is that
it does not read the postamble, so it can be started before TeX
finishes. This switch makes dvipng wait at end-of-file for further
output, unless it finds the POST marker that indicates the end of
the DVI. This is similar to tail -f but for DVI-to-PNG conversion.
--freetype*
Enable/disable FreeType font rendering (default on). This option is
available if the FreeType2 font library was present at compilation
time. If this is the case, dvipng will have direct support for
PostScript Type1 and TrueType fonts internally, rather than using
gsftopk for rendering the fonts. If you have PostScript versions of
Computer Modern installed, there will be no need to generate
bitmapped (PK) variants on disk of these. Then, you can render
images at different (and unusual) resolutions without cluttering
the disk with lots of bitmapped fonts.
--gamma num
Control the interpolation of colors in the greyscale anti-aliasing
color palette. Default value is 1.0. For 0 < num < 1, the fonts
will be lighter (more like the background), and for num > 1, the
fonts will be darker (more like the foreground).
--gif*
The images are output in the GIF format, if GIF support is enabled.
This is the default for the dvigif binary, which only will be
available when GIF support is enabled. GIF images are palette
images (see the --palette option) and does not support true alpha
channels (see the --bg option). See also the --png option.
--height*
Report the height of the image. This only works reliably when the
LaTeX style preview.sty from preview-latex is used with the active
option. It reports the number of pixels from the top of the image
to the baseline of the image. The total height of the image is
obtained as the sum of the values reported from --height and
--depth.
-l [=]num
The last page printed will be the first one numbered num. Default
is the last page in the document. If num is prefixed by an equals
sign, then it (and the argument to the -p option, if specified) is
treated as a physical (absolute) page number, rather than a value
to compare with the TeX \count0 values stored in the DVI file.
Thus, using -l =9 will end with the ninth page of the document, no
matter what the pages are actually numbered.
--mode mode
This option only has an effect when using bitmapped (PK) fonts. Use
mode as the Metafont device name for the PK fonts (both for path
searching and font generation). This needs to be augmented with the
base device resolution, given with the --bdpi option. See the file
<ftp://ftp.tug.org/tex/modes.mf> for a list of resolutions and mode
names for most devices.
-M* This option only has an effect when using bitmapped (PK) fonts. It
turns off automatic PK font generation (mktexpk).
--nogs*
This switch prohibits the internal call to GhostScript for
displaying PostScript specials. --nogs0 turns the call back on.
--nogssafer*
Normally, if GhostScript is used to render PostScript specials, the
GhostScript interpreter is run with the option -dSAFER. The
--nogssafer option runs GhostScript without -dSAFER. The -dSAFER
option in Ghostscript disables PostScript operators such as
deletefile, to prevent possibly malicious PostScript programs from
having any effect.
--norawps*
Some packages generate raw PostScript specials, even non-rendering
such specials. This switch turns off the internal call to
GhostScript intended to display these raw PostScript specials.
--norawps0 turns the call back on.
-o name
Send output to the file name. A single occurrence of %d or %01d,
..., %09d will be exchanged for the physical page number (this can
be changed, see the --dvinum switch). The default output filename
is file%d.png where the input DVI file was file.dvi.
-O x-offset,y-offset
Move the origin by x-offset,y-offset, a comma-separated pair of
dimensions such as .1in,-.3cm. The origin of the page is shifted
from the default position (of one inch down, one inch to the right
from the upper left corner of the paper) by this amount.
-p [=]num
The first page printed will be the first one numbered num. Default
is the first page in the document. If num is prefixed by an equals
sign, then it (and the argument to the -l option, if specified) is
treated as a physical (absolute) page number, rather than a value
to compare with the TeX \count0 values stored in the DVI file.
Thus, using -p =3 will start with the third page of the document,
no matter what the pages are actually numbered.
--palette*
When an external image is included, dvipng will automatically
switch to truecolor mode, to avoid unnecessary delay and quality
reduction, and enable the EPS translator to draw on a transparent
background and outside of the boundingbox. This switch will force
palette (256-color) output and make dvipng revert to opaque clipped
image inclusion. This will also override the --truecolor switch if
present.
--picky*
No images are output when a warning occurs. Normally, dvipng will
output an image in spite of a warning, but there may be something
missing in this image. One reason to use this option would be if
you have a more complete but slower fallback converter. Mainly,
this is useful for failed figure inclusion and unknown \special
occurrences, but warnings will also occur for missing or unknown
color specs and missing PK fonts.
--png*
The images are output in the PNG format. This is the default for
the dvipng binary. See also the --gif option.
-pp firstpage-lastpage
Print pages firstpage through lastpage; but not quite equivalent to
-p firstpage -l lastpage. For example, when rendering a book, there
may be several instances of a page in the DVI file (one in
"\frontmatter", one in "\mainmatter", and one in " ackmatter"). In
case of several pages matching, -pp firstpage-lastpage will render
all pages that matches the specified range, while -p firstpage -l
lastpage will render the pages from the first occurrence of
firstpage to the first occurrence of lastpage. This is the
(undocumented) behaviour of dvips. In dvipng you can give both
kinds of options, in which case you get all pages that matches the
range in -pp between the pages from -p to -l. Also multiple -pp
options accumulate, unlike -p and -l. The - separator can also be
:. Note that -pp -1 will be interpreted as "all pages up to and
including 1", if you want a page numbered -1 (only the table of
contents, say) put -pp -1--1, or more readable, -pp -1:-1.
-q* Run quietly. Don't chatter about pages converted, etc. to standard
output; report no warnings (only errors) to standard error.
-Q num
Set the quality to num. That is, choose the number of antialiasing
levels for bitmapped fonts (PK), to be num*num+1. The default value
is 4 which gives 17 levels of antialiasing for antialiased fonts
from these two. If FreeType is available, its rendering is
unaffected by this option.
-r* Toggle output of pages in reverse/forward order. By default, the
first page in the DVI is output first.
--strict*
The program exits when a warning occurs. Normally, dvipng will
output an image in spite of a warning, but there may be something
missing in this image. One reason to use this option would be if
you have a more complete but slower fallback converter. See the
--picky option above for a list of when warnings occur.
-T image_size
Set the image size to image_size which can be either of bbox,
tight, or a comma-separated pair of dimensions hsize,vsize such as
.1in,.3cm. The default is bbox which produces a PNG that includes
all ink put on the page and in addition the DVI origin, located 1in
from the top and 1in from the left edge of the paper. This usually
gives whitespace above and to the left in the produced image. The
value tight will make dvipng only include all ink put on the page,
producing neat images.
--truecolor*
This will make dvipng generate truecolor output. Note that
truecolor output is automatic if you include an external image in
your DVI, e.g., via a PostScript special (i.e., the graphics or
graphicx package). This switch is overridden by the --palette
switch.
-v* Enable verbose operation. This will currently indicate what fonts
is used, in addition to the usual output.
--width*
Report the width of the image. See also --height and --depth.
-x num
This option is deprecated; it should not be used. It is much better
to select the output resolution directly with the -D option. This
option sets the magnification ratio to num/1000 and overrides the
magnification specified in the DVI file. Must be between 10 and
100000. It is recommended that you use standard magstep values
(1095, 1200, 1440, 1728, 2074, 2488, 2986, and so on) to help
reduce the total number of PK files generated. num may be a real
number, not an integer, for increased precision.
-z num
Set the PNG compression level to num. This option is enabled if
your libgd is new enough. The default compression level is 1, which
selects maximum speed at the price of slightly larger PNGs. For an
older libgd, the hard-soldered value 5 is used. The include file
png.h says "Currently, valid values range from 0 - 9, corresponding
directly to the zlib compression levels 0 - 9 (0 - no compression,
9 - "maximal" compression). Note that tests have shown that zlib
compression levels 3-6 usually perform as well as level 9 for PNG
images, and do considerably fewer calculations. In the future,
these values may not correspond directly to the zlib compression
levels."
NOTES
The full manual is accessible in info format, on most systems by typing
info dvipng
COPYRIGHT
This program is released under the GNU Lesser General Public License version 3, see the COPYING file in the dvipng distribution or <http://www.gnu.org/licenses/gpl.html>. Copyright (c) 2002-2015 Jan-AAke Larsson
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
