kexec - directly boot into a new kernel
/sbin/kexec [-v (--version)] [-f (--force)] [-x (--no-ifdown)] [-y (--no-sync)] [-l (--load)] [-p (--load-panic)] [-u (--unload)] [-e (--exec)] [-t (--type)] [--mem-min=addr] [--mem-max=addr]
kexec is a system call that enables you to load and boot into another kernel from the currently running kernel. kexec performs the function of the boot loader from within the kernel. The primary difference between a standard system boot and a kexec boot is that the hardware initialization normally performed by the BIOS or firmware (depending on architecture) is not performed during a kexec boot. This has the effect of reducing the time required for a reboot. Make sure you have selected CONFIG_KEXEC=y when configuring the kernel. The CONFIG_KEXEC option enables the kexec system call.
Using kexec consists of (1) loading the kernel to be rebooted to into memory, and (2) actually rebooting to the pre-loaded kernel. To load a kernel, the syntax is as follows: kexec -l kernel-image --append=command-line-options --initrd=initrd-image where kernel-image is the kernel file that you intend to reboot to. Insert the command-line parameters that must be passed to the new kernel into command-line-options. Passing the exact contents of /proc/cmdline into command-line-options is the safest way to ensure that correct values are passed to the rebooting kernel. The optional initrd-image is the initrd image to be used during boot. It's also possible to invoke kexec without an option parameter. In that case, kexec loads the specified kernel and then invokes shutdown(8). If the shutdown scripts of your Linux distribution support kexec-based rebooting, they then call kexec -e just before actually rebooting the machine. That way, the machine does a clean shutdown including all shutdown scripts.
For example, if the kernel image you want to reboot to is /boot/vmlinux, the contents of /proc/cmdline is root=/dev/hda1, and the path to the initrd is /boot/initrd, then you would use the following command to load the kernel: kexec -l /boot/vmlinux --append=root=/dev/hda1 --initrd=/boot/initrd After this kernel is loaded, it can be booted to at any time using the command: kexec -e
-d (--debug) Enable debugging messages. -e (--exec) Run the currently loaded kernel. Note that it will reboot into the loaded kernel without calling shutdown(8). -f (--force) Force an immediate kexec call, do not call shutdown(8) (contrary to the default action without any option parameter). This option performs the same actions like executing -l and -e in one call. -h (--help) Open a help file for kexec. -l (--load) kernel Load the specified kernel into the current kernel. -p (--load-panic) Load the new kernel for use on panic. -t (--type=type) Specify that the new kernel is of this type. -u (--unload) Unload the current kexec target kernel. If a capture kernel is being unloaded then specify -p with -u. -v (--version) Return the version number of the installed utility. -x (--no-ifdown) Shut down the running kernel, but restore the interface on reload. -y (--no-sync) Shut down the running kernel, but skip syncing the filesystems. --mem-min=addr Specify the lowest memory address addr to load code into. --mem-max=addr Specify the highest memory address addr to load code into. --entry=addr Specify the jump back address. (0 means it's not jump back or preserve context) --load-preserve-context Load the new kernel and preserve context of current kernel during kexec. --load-jump-back-helper Load a helper image to jump back to original kernel. --reuseinitrd Reuse initrd from first boot.
Beoboot-x86 --args-elf Pass ELF boot notes. --args-linux Pass Linux kernel style options. --real-mode Use the kernel's real mode entry point. elf-x86 --append=string Append string to the kernel command line. --command-line=string Set the kernel command line to string. --reuse-cmdline Use the command line from the running system. When a panic kernel is loaded, it strips the crashkernel parameter automatically. The BOOT_IMAGE parameter is also stripped. --initrd=file Use file as the kernel's initial ramdisk. --ramdisk=file Use file as the kernel's initial ramdisk. bzImage-x86 --append=string Append string to the kernel command line. --command-line=string Set the kernel command line to string. --reuse-cmdline Use the command line from the running system. When a panic kernel is loaded, it strips the crashkernel parameter automatically. The BOOT_IMAGE parameter is also stripped. --initrd=file Use file as the kernel's initial ramdisk. --ramdisk=file Use file as the kernel's initial ramdisk. --real-mode Use real-mode entry point. multiboot-x86 --command-line=string Set the kernel command line to string. --reuse-cmdline Use the command line from the running system. When a panic kernel is loaded, it strips the crashkernel parameter automatically. The BOOT_IMAGE parameter is also stripped. --module=mod arg1 arg2 ... Load module mod with command-line arguments arg1 arg2 ... This parameter can be specified multiple times.
--console-serial Enable the serial console. --console-vga Enable the VGA console. --elf32-core-headers Prepare core headers in ELF32 format. --elf64-core-headers Prepare core headers in ELF64 format. --reset-vga Attempt to reset a standard VGA device. --serial=port Specify the serial port for debug output. --serial-baud=baud_rate Specify the baud rate of the serial port.
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.