KMPY - Converts from metacode coordinates to plotter address unit coordinates.
spps_converters - A set of functions, each of which transforms a coordinate from one of the NCAR Graphics coordinate systems to another. The complete list of functions is as follows: CFUX, CFUY, CMFX, CMFY, CMUX, CMUY, CPFX, CPFY, CPUX, CPUY, CUFX, CUFY, KFMX, KFMY, KFPX, KFPY, KMPX, KMPY, KPMX, KPMY, KUMX, KUMY, KUPX, and KUPY.
Plotter Address Units (PAUs) and Metacode Units (MUs) are no longer used in NCAR Graphics; thus, all functions with either an M or a P as the second or third letter of the function name are considered obsolete. The current recognized coordinate systems are GKS world coordinates, GKS normalized device coordinates, NCAR Graphics fractional coordinates, and NCAR Graphics user coordinates. See the NCAR Graphics document "NCAR Graphics Fundamentals, UNIX Version" for descriptions of these coordinate systems. The following definitions of the PAU coordinate system and the MU coordinate system are provided for the purpose of interpreting and converting codes which use PAUs or MUs: The plotter coordinates of a point are integers IPX and IPY, where IPX is between 1 and 2**MX and IPY is between 1 and 2**MY. MX and MY are internal parameters of SPPS; each has a default value of 10. Values of MX and MY can be set by calling the routines SETI or SETUSV and retrieved by calling the routines GETSI or GETUSV. The metacode coordinates of a point are integers IMX and IMY between 0 and 32767 inclusive. The area addressed is a square in a "metacode space" that is usually mapped into a square subset of the addressable area of the plotting device. Metacode coordinates were used in calls to the routine PLOTIT and are returned in calls to FL2INT.
Current: X = CFUX (RX), Y = CFUY(RY) X = CUFX (RX), Y = CUFY(RY) Obsolete: X = CMUX (IX), Y = CMUY(IY) X = CPUX (IX), Y = CPUY(IY) X = CMFX (IX), Y = CMFY(IY) X = CPFX (IX), Y = CPFY(IY) I = KFMX (RX), J = KFMY(RY) I = KUMX (RX), J = KUMY(RY) I = KFPX (RX), J = KFPY(RY) I = KUPX (RX), J = KUPY(RY) I = KPMX (IX), J = KPMY(IY) I = KMPX (IX), J = KMPY(IY)
#include <ncarg/ncargC.h> float c_cfux (float rx) float c_cfuy (float ry) float c_cufx (float rx) float c_cufy (float ry)
RX (an input expression of type REAL) is an X coordinate in the coordinate system specified by the second letter of the function name. In a reference to CFUX, RX is a fractional X coordinate; in a reference to CUFX, RX is a user X coordinate. RY (an input expression of type REAL) is a Y coordinate in the coordinate system specified by the second letter of the function name. In a reference to CFUY, RY is a fractional Y coordinate; in a reference to CUFY, RY is a user Y coordinate. IX and IY occur as arguments only in references to some of the obsolete functions; they represent input expressions of type INTEGER, specifying the X and Y coordinates of a point in either PAUs or MUs (depending on the second letter of the function name). The first letter of the function name is a C if the result is of type REAL and a K if the result is of type INTEGER (the latter only happens for some of the obsolete ones). This conforms to the usual FORTRAN convention for implicit typing. The second letter of the function name specifies the coordinate system of the argument. The third letter of the function name specifies the coordinate system of the functional result. In references to CFUX and CFUY, the result is in the user system; in references to CUFX and CUFY, the result is in the fractional system. The fourth letter of the function name is an X or a Y, depending on whether an X or a Y coordinate is being converted.
The C-binding argument description is the same as the FORTRAN argument description.
Use the ncargex command to see the following relevant examples which use coordinate converters: mpex10, cbex10, sfex02, epltch. The command "ncargex -n mpex10" will load the driver mpex10.f into your current working directory where you can examine the file using a local editor, or the UNIX more command.
There were 24 conversion functions in the original set. These functions (12 for the X coordinate of a point, and 12 for the Y coordinate), allowed one to convert between any combination of PAUs, MUs, fractional coordinates, and user coordinates. PAUs and MUs are now obsolete; thus, only four of the conversion functions are still pertinent: CFUX and CFUY allow one to convert the X and Y coordinates of a point from the fractional system to the user system, while CUFX and CUFY do the opposite. To use any of the conversion routines, load the load the NCAR Graphics libraries ncarg, ncarg_gks, and ncarg_c, preferably in that order.
Online: cfux, cfuy, cmfx, cmfy, cmux, cmuy, cpfx, cpfy, cpux, cpuy, cufx, cufy, kfmx, kfmy, kfpx, kfpy, kmpx, kmpy, kpmx, kpmy, kumx, kumy, kupx, kupy, spps, ncarg_cbind Hardcopy: NCAR Graphics Fundamentals, UNIX Version; User's Guide for NCAR GKS-0A Graphics
Copyright (C) 1987-2009 University Corporation for Atmospheric Research The use of this Software is governed by a License Agreement.
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.