mount.fuse(8)
NAME
fuse - format and options for the fuse file systems
DESCRIPTION
FUSE (Filesystem in Userspace) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. FUSE also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations.
CONFIGURATION
Some options regarding mount policy can be set in the file
/etc/fuse.conf. Currently these options are:
mount_max = NNN
Set the maximum number of FUSE mounts allowed to non-root users.
The default is 1000.
user_allow_other
Allow non-root users to specify the allow_other or allow_root
mount options (see below).
OPTIONS
Most of the generic mount options described in mount are supported (ro,
rw, suid, nosuid, dev, nodev, exec, noexec, atime, noatime, sync,
async, dirsync). Filesystems are mounted with nodev,nosuid by default,
which can only be overridden by a privileged user.
General mount options:
These are FUSE specific mount options that can be specified for all
filesystems:
default_permissions
By default FUSE doesn't check file access permissions, the
filesystem is free to implement it's access policy or leave it
to the underlying file access mechanism (e.g. in case of network
filesystems). This option enables permission checking,
restricting access based on file mode. This is option is
usually useful together with the allow_other mount option.
allow_other
This option overrides the security measure restricting file
access to the user mounting the filesystem. So all users
(including root) can access the files. This option is by
default only allowed to root, but this restriction can be
removed with a configuration option described in the previous
section.
allow_root
This option is similar to allow_other but file access is limited
to the user mounting the filesystem and root. This option and
allow_other are mutually exclusive.
kernel_cache
This option disables flushing the cache of the file contents on
every open(2). This should only be enabled on filesystems,
where the file data is never changed externally (not through the
mounted FUSE filesystem). Thus it is not suitable for network
filesystems and other intermediate filesystems.
NOTE: if this option is not specified (and neither direct_io)
data is still cached after the open(2), so a read(2) system call
will not always initiate a read operation.
auto_cache
This option enables automatic flushing of the data cache on
open(2). The cache will only be flushed if the modification time
or the size of the file has changed.
large_read
Issue large read requests. This can improve performance for
some filesystems, but can also degrade performance. This option
is only useful on 2.4.X kernels, as on 2.6 kernels requests size
is automatically determined for optimum performance.
direct_io
This option disables the use of page cache (file content cache)
in the kernel for this filesystem. This has several affects:
1. Each read(2) or write(2) system call will initiate one or more
read or write operations, data will not be cached in the kernel.
2. The return value of the read() and write() system calls will
correspond to the return values of the read and write
operations. This is useful for example if the file size is not
known in advance (before reading it).
max_read=N
With this option the maximum size of read operations can be set.
The default is infinite. Note that the size of read requests is
limited anyway to 32 pages (which is 128kbyte on i386).
max_readahead=N
Set the maximum number of bytes to read-ahead. The default is
determined by the kernel. On linux-2.6.22 or earlier it's 131072
(128kbytes)
max_write=N
Set the maximum number of bytes in a single write operation. The
default is 128kbytes. Note, that due to various limitations,
the size of write requests can be much smaller (4kbytes). This
limitation will be removed in the future.
async_read
Perform reads asynchronously. This is the default
sync_read
Perform all reads (even read-ahead) synchronously.
hard_remove
The default behavior is that if an open file is deleted, the
file is renamed to a hidden file (.fuse_hiddenXXX), and only
removed when the file is finally released. This relieves the
filesystem implementation of having to deal with this problem.
This option disables the hiding behavior, and files are removed
immediately in an unlink operation (or in a rename operation
which overwrites an existing file).
It is recommended that you not use the hard_remove option. When
hard_remove is set, the following libc functions fail on
unlinked files (returning errno of ENOENT): read(2), write(2),
fsync(2), close(2), f*xattr(2), ftruncate(2), fstat(2),
fchmod(2), fchown(2)
debug Turns on debug information printing by the library.
fsname=NAME
Sets the filesystem source (first field in /etc/mtab). The
default is the mount program name.
subtype=TYPE
Sets the filesystem type (third field in /etc/mtab). The default
is the mount program name. If the kernel suppports it, /etc/mtab
and /proc/mounts will show the filesystem type as fuse.TYPE
If the kernel doesn't support subtypes, the source filed will be
TYPE#NAME, or if fsname option is not specified, just TYPE.
use_ino
Honor the st_ino field in kernel functions getattr() and
fill_dir(). This value is used to fill in the st_ino field in
the stat(2), lstat(2), fstat(2) functions and the d_ino field in
the readdir(2) function. The filesystem does not have to
guarantee uniqueness, however some applications rely on this
value being unique for the whole filesystem.
readdir_ino
If use_ino option is not given, still try to fill in the d_ino
field in readdir(2). If the name was previously looked up, and
is still in the cache, the inode number found there will be
used. Otherwise it will be set to -1. If use_ino option is
given, this option is ignored.
nonempty
Allows mounts over a non-empty file or directory. By default
these mounts are rejected to prevent accidental covering up of
data, which could for example prevent automatic backup.
umask=M
Override the permission bits in st_mode set by the filesystem.
The resulting permission bits are the ones missing from the
given umask value. The value is given in octal representation.
uid=N Override the st_uid field set by the filesystem (N is numeric).
gid=N Override the st_gid field set by the filesystem (N is numeric).
blkdev Mount a filesystem backed by a block device. This is a
privileged option. The device must be specified with the
fsname=NAME option.
entry_timeout=T
The timeout in seconds for which name lookups will be cached.
The default is 1.0 second. For all the timeout options, it is
possible to give fractions of a second as well (e.g.
entry_timeout=2.8)
negative_timeout=T
The timeout in seconds for which a negative lookup will be
cached. This means, that if file did not exist (lookup retuned
ENOENT), the lookup will only be redone after the timeout, and
the file/directory will be assumed to not exist until then. The
default is 0.0 second, meaning that caching negative lookups are
disabled.
attr_timeout=T
The timeout in seconds for which file/directory attributes are
cached. The default is 1.0 second.
ac_attr_timeout=T
The timeout in seconds for which file attributes are cached for
the purpose of checking if auto_cache should flush the file data
on open. The default is the value of attr_timeout
intr Allow requests to be interrupted. Turning on this option may
result in unexpected behavior, if the filesystem does not
support request interruption.
intr_signal=NUM
Specify which signal number to send to the filesystem when a
request is interrupted. The default is hardcoded to USR1.
modules=M1[:M2...]
Add modules to the filesystem stack. Modules are pushed in the
order they are specified, with the original filesystem being on
the bottom of the stack.
FUSE MODULES (STACKING)
Modules are filesystem stacking support to high level API. Filesystem
modules can be built into libfuse or loaded from shared object
iconv
Perform file name character set conversion. Options are:
from_code=CHARSET
Character set to convert from (see iconv -l for a list of
possible values). Default is UTF-8.
to_code=CHARSET
Character set to convert to. Default is determined by the
current locale.
subdir
Prepend a given directory to each path. Options are:
subdir=DIR
Directory to prepend to all paths. This option is mandatory.
rellinks
Transform absolute symlinks into relative
norellinks
Do not transform absolute symlinks into relative. This is the
default.
SECURITY
The fusermount program is installed set-user-gid to fuse. This is done
to allow users from fuse group to mount their own filesystem
implementations. There must however be some limitations, in order to
prevent Bad User from doing nasty things. Currently those limitations
are:
1. The user can only mount on a mountpoint, for which it has write
permission
2. The mountpoint is not a sticky directory which isn't owned by
the user (like /tmp usually is)
3. No other user (including root) can access the contents of the
mounted filesystem.
NOTE
FUSE filesystems are unmounted using the fusermount(1) command (fusermount -u mountpoint).
AUTHORS
The main author of FUSE is Miklos Szeredi <mszeredi@inf.bme.hu>. This man page was written by Bastien Roucaries <roucaries.bastien+debian@gmail.com> for the Debian GNU/Linux distribution (but it may be used by others) from README file.
SEE ALSO
fusermount(1) mount(8) fuse(8)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
