pod2text(1)
NAME
pod2text - Convert POD data to formatted ASCII text
SYNOPSIS
pod2text [-aclostu] [--code] [--errors=style] [-i indent]
[-qquotes] [--nourls] [--stderr] [-wwidth]
[input [output ...]]
pod2text -h
DESCRIPTION
pod2text is a front-end for Pod::Text and its subclasses. It uses them to generate formatted ASCII text from POD source. It can optionally use either termcap sequences or ANSI color escape sequences to format the text. input is the file to read for POD source (the POD can be embedded in code). If input isn't given, it defaults to "STDIN". output, if given, is the file to which to write the formatted output. If output isn't given, the formatted output is written to "STDOUT". Several POD files can be processed in the same pod2text invocation (saving module load and compile times) by providing multiple pairs of input and output files on the command line.
OPTIONS
-a, --alt
Use an alternate output format that, among other things, uses a
different heading style and marks "=item" entries with a colon in
the left margin.
--code
Include any non-POD text from the input file in the output as well.
Useful for viewing code documented with POD blocks with the POD
rendered and the code left intact.
-c, --color
Format the output with ANSI color escape sequences. Using this
option requires that Term::ANSIColor be installed on your system.
--errors=style
Set the error handling style. "die" says to throw an exception on
any POD formatting error. "stderr" says to report errors on
standard error, but not to throw an exception. "pod" says to
include a POD ERRORS section in the resulting documentation
summarizing the errors. "none" ignores POD errors entirely, as
much as possible.
The default is "die".
-i indent, --indent=indent
Set the number of spaces to indent regular text, and the default
indentation for "=over" blocks. Defaults to 4 spaces if this
option isn't given.
-h, --help
Print out usage information and exit.
-l, --loose
Print a blank line after a "=head1" heading. Normally, no blank
line is printed after "=head1", although one is still printed after
"=head2", because this is the expected formatting for manual pages;
if you're formatting arbitrary text documents, using this option is
recommended.
-m width, --left-margin=width, --margin=width
The width of the left margin in spaces. Defaults to 0. This is
the margin for all text, including headings, not the amount by
which regular text is indented; for the latter, see -i option.
--nourls
Normally, L<> formatting codes with a URL but anchor text are
formatted to show both the anchor text and the URL. In other
words:
L<foo|http://example.com/>
is formatted as:
foo <http://example.com/>
This flag, if given, suppresses the URL when anchor text is given,
so this example would be formatted as just "foo". This can produce
less cluttered output in cases where the URLs are not particularly
important.
-o, --overstrike
Format the output with overstrike printing. Bold text is rendered
as character, backspace, character. Italics and file names are
rendered as underscore, backspace, character. Many pagers, such as
less, know how to convert this to bold or underlined text.
-q quotes, --quotes=quotes
Sets the quote marks used to surround C<> text to quotes. If
quotes is a single character, it is used as both the left and right
quote. Otherwise, it is split in half, and the first half of the
string is used as the left quote and the second is used as the
right quote.
quotes may also be set to the special value "none", in which case
no quote marks are added around C<> text.
-s, --sentence
Assume each sentence ends with two spaces and try to preserve that
spacing. Without this option, all consecutive whitespace in non-
verbatim paragraphs is compressed into a single space.
--stderr
By default, pod2text dies if any errors are detected in the POD
input. If --stderr is given and no --errors flag is present,
errors are sent to standard error, but pod2text does not abort.
This is equivalent to "--errors=stderr" and is supported for
backward compatibility.
-t, --termcap
Try to determine the width of the screen and the bold and underline
sequences for the terminal from termcap, and use that information
in formatting the output. Output will be wrapped at two columns
less than the width of your terminal device. Using this option
requires that your system have a termcap file somewhere where
Term::Cap can find it and requires that your system support
termios. With this option, the output of pod2text will contain
terminal control sequences for your current terminal type.
-u, --utf8
By default, pod2text tries to use the same output encoding as its
input encoding (to be backward-compatible with older versions).
This option says to instead force the output encoding to UTF-8.
Be aware that, when using this option, the input encoding of your
POD source should be properly declared unless it's US-ASCII.
Pod::Simple will attempt to guess the encoding and may be
successful if it's Latin-1 or UTF-8, but it will warn, which by
default results in a pod2text failure. Use the "=encoding" command
to declare the encoding. See perlpod(1) for more information.
-w, --width=width, -width
The column at which to wrap text on the right-hand side. Defaults
to 76, unless -t is given, in which case it's two columns less than
the width of your terminal device.
EXIT STATUS
As long as all documents processed result in some output, even if that output includes errata (a "POD ERRORS" section generated with "--errors=pod"), pod2text will exit with status 0. If any of the documents being processed do not result in an output document, pod2text will exit with status 1. If there are syntax errors in a POD document being processed and the error handling style is set to the default of "die", pod2text will abort immediately with exit status 255.
DIAGNOSTICS
If pod2text fails with errors, see Pod::Text and Pod::Simple for
information about what those errors might mean. Internally, it can
also produce the following diagnostics:
-c (--color) requires Term::ANSIColor be installed
(F) -c or --color were given, but Term::ANSIColor could not be
loaded.
Unknown option: %s
(F) An unknown command line option was given.
In addition, other Getopt::Long error messages may result from invalid
command-line options.
ENVIRONMENT
COLUMNS
If -t is given, pod2text will take the current width of your screen
from this environment variable, if available. It overrides
terminal width information in TERMCAP.
TERMCAP
If -t is given, pod2text will use the contents of this environment
variable if available to determine the correct formatting sequences
for your current terminal device.
SEE ALSO
Pod::Text, Pod::Text::Color, Pod::Text::Overstrike, Pod::Text::Termcap, Pod::Simple, perlpod(1) The current version of this script is always available from its web site at <http://www.eyrie.org/~eagle/software/podlators/>. It is also part of the Perl core distribution as of 5.6.0.
AUTHOR
Russ Allbery <rra@cpan.org>.
COPYRIGHT AND LICENSE
Copyright 1999, 2000, 2001, 2004, 2006, 2008, 2010, 2012, 2013, 2014, 2015, 2016 Russ Allbery <rra@cpan.org> This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
