pv(1)
NAME
pv - monitor the progress of data through a pipe
SYNOPSIS
pv [OPTION] [FILE]... pv [-h|-V]
DESCRIPTION
pv shows the progress of data through a pipeline by giving information such as time elapsed, percentage completed (with progress bar), current throughput rate, total data transferred, and ETA. To use it, insert it in a pipeline between two processes, with the appropriate options. Its standard input will be passed through to its standard output and progress will be shown on standard error. pv will copy each supplied FILE in turn to standard output (- means standard input), or if no FILEs are specified just standard input is copied. This is the same behaviour as cat(1). A simple example to watch how quickly a file is transferred using nc(1): pv file | nc -w 1 somewhere.com 3000 A similar example, transferring a file from another process and passing the expected size to pv: cat file | pv -s 12345 | nc -w 1 somewhere.com 3000 A more complicated example using numeric output to feed into the dialog(1) program for a full-screen progress display: (tar cf - . \ | pv -n -s $(du -sb . | awk '{print $1}') \ | gzip -9 > out.tgz) 2>&1 \ | dialog --gauge 'Progress' 7 70 Taking an image of a disk, skipping errors: pv -EE /dev/sda > disk-image.img Writing an image back to a disk: pv disk-image.img > /dev/sda Zeroing a disk: pv < /dev/zero > /dev/sda Note that if the input size cannot be calculated, and the output is a block device, then the size of the block device will be used and pv will automatically stop at that size as if -S had been given. (Linux only): Watching file descriptor 3 opened by another process 1234: pv -d 1234:3 (Linux only): Watching all file descriptors used by process 1234: pv -d 1234
OPTIONS
pv takes many options, which are divided into display switches, output modifiers, and general options.
DISPLAY SWITCHES
If no display switches are specified, pv behaves as if -p, -t, -e, -r,
and -b had been given (i.e. everything except average rate is switched
on). Otherwise, only those display types that are explicitly switched
on will be shown.
-p, --progress
Turn the progress bar on. If standard input is not a file and
no size was given (with the -s modifier), the progress bar
cannot indicate how close to completion the transfer is, so it
will just move left and right to indicate that data is moving.
-t, --timer
Turn the timer on. This will display the total elapsed time
that pv has been running for.
-e, --eta
Turn the ETA timer on. This will attempt to guess, based on
previous transfer rates and the total data size, how long it
will be before completion. This option will have no effect if
the total data size cannot be determined.
-I, --fineta
Turn the ETA timer on, but display the estimated local time of
arrival instead of time left. When the estimated time is more
than 6 hours in the future, the date is shown as well.
-r, --rate
Turn the rate counter on. This will display the current rate of
data transfer.
-a, --average-rate
Turn the average rate counter on. This will display the average
rate of data transfer so far.
-b, --bytes
Turn the total byte counter on. This will display the total
amount of data transferred so far.
-T, --buffer-percent
Turn on the transfer buffer percentage display. This will show
the percentage of the transfer buffer in use - but see the
caveat under %T in the FORMATTING section below.
-A, --last-written NUM
Show the last NUM bytes written - but see the caveat under %nA
in the FORMATTING section below.
-F, --format FORMAT
Ignore the options -p, -t, -e, -r, -a, -b, -T, and -A, and
instead use the format string FORMAT to determine the output
format. See the FORMATTING section below.
-n, --numeric
Numeric output. Instead of giving a visual indication of
progress, pv will give an integer percentage, one per line, on
standard error, suitable for piping (via convoluted redirection)
into dialog(1). Note that -f is not required if -n is being
used.
Note that if --numeric is in use, then adding --bytes will cause
the number of bytes processed so far to be output instead of a
percentage; if --line-mode is also in use, then instead of bytes
or a percentage, the number of lines so far is output. And
finally, if --timer is also in use, then each output line is
prefixed with the elapsed time so far, as a decimal number of
seconds.
-q, --quiet
No output. Useful if the -L option is being used on its own to
just limit the transfer rate of a pipe.
OUTPUT MODIFIERS
-W, --wait
Wait until the first byte has been transferred before showing
any progress information or calculating any ETAs. Useful if the
program you are piping to or from requires extra information
before it starts, eg piping data into gpg(1) or mcrypt(1) which
require a passphrase before data can be processed.
-D, --delay-start SEC
Wait until SEC seconds have passed before showing any progress
information, for example in a script where you only want to show
a progress bar if it starts taking a long time. Note that this
can be a decimal such as 0.5.
-s SIZE, --size SIZE
Assume the total amount of data to be transferred is SIZE bytes
when calculating percentages and ETAs. The same suffixes of
"k", "m" etc can be used as with -L.
Has no effect if used with -d PID to watch all file descriptors
of a process, but will work with -d PID:FD.
-l, --line-mode
Instead of counting bytes, count lines (newline characters). The
progress bar will only move when a new line is found, and the
value passed to the -s option will be interpreted as a line
count. Note that file sizes are not automatically calculated
when this option is used, to avoid having to read all files
twice.
-0, --null
Count lines as null terminated. This option implies
--line-mode.
-i SEC, --interval SEC
Wait SEC seconds between updates. The default is to update
every second. Note that this can be a decimal such as 0.1.
-w WIDTH, --width WIDTH
Assume the terminal is WIDTH characters wide, instead of trying
to work it out (or assuming 80 if it cannot be guessed).
-H HEIGHT, --height HEIGHT
Assume the terminal is HEIGHT rows high, instead of trying to
work it out (or assuming 25 if it cannot be guessed).
-N NAME, --name NAME
Prefix the output information with NAME. Useful in conjunction
with -c if you have a complicated pipeline and you want to be
able to tell different parts of it apart.
-f, --force
Force output. Normally, pv will not output any visual display
if standard error is not a terminal. This option forces it to
do so.
-c, --cursor
Use cursor positioning escape sequences instead of just using
carriage returns. This is useful in conjunction with -N (name)
if you are using multiple pv invocations in a single, long,
pipeline.
DATA TRANSFER MODIFIERS
-L RATE, --rate-limit RATE
Limit the transfer to a maximum of RATE bytes per second. A
suffix of "k", "m", "g", or "t" can be added to denote kilobytes
(*1024), megabytes, and so on.
-B BYTES, --buffer-size BYTES
Use a transfer buffer size of BYTES bytes. A suffix of "k",
"m", "g", or "t" can be added to denote kilobytes (*1024),
megabytes, and so on. The default buffer size is the block size
of the input file's filesystem multiplied by 32 (512kb max), or
400kb if the block size cannot be determined.
-C, --no-splice
Never use splice(2), even if it would normally be possible. The
splice(2) system call is a more efficient way of transferring
data from or to a pipe than regular read(2) and write(2), but
means that the transfer buffer may not be used. This prevents
-A and -T from working, so if you want to use -A or -T then you
will need to use -C, at the cost of a small loss in transfer
efficiency. (This option has no effect on systems where
splice(2) is unavailable).
-E, --skip-errors
Ignore read errors by attempting to skip past the offending
sections. The corresponding parts of the output will be null
bytes. At first only a few bytes will be skipped, but if there
are many errors in a row then the skips will move up to chunks
of 512. This is intended to be similar to dd conv=sync,noerror
but has not been as thoroughly tested.
Specify -E twice to only report a read error once per file,
instead of reporting each byte range skipped.
-S, --stop-at-size
If a size was specified with -s, stop transferring data once
that many bytes have been written, instead of continuing to the
end of input.
-d PID[:FD], --watchfd PID[:FD]
Instead of transferring data, watch file descriptor FD of
process PID, and show its progress. The pv process will exit
when FD either changes to a different file, changes read/write
mode, or is closed; other data transfer modifiers - and remote
control - may not be used with this option.
If only a PID is specified, then that process will be watched,
and all regular files and block devices it opens will be shown
with a progress bar. The pv process will exit when process PID
exits.
-R PID, --remote PID
If PID is an instance of pv that is already running, -R PID will
cause that instance to act as though it had been given this
instance's command line instead. For example, if pv -L 123k is
running with process ID 9876, then running pv -R 9876 -L 321k
will cause it to start using a rate limit of 321k instead of
123k. Note that some options cannot be changed while running,
such as -c, -l, -f, -D, -E, and -S.
GENERAL OPTIONS
-P FILE, --pidfile FILE
Save the process ID of pv in FILE. The file will be truncated
if it already exists, and will be removed when pv exits. While
pv is running, it will contain a single number - the process ID
of pv - followed by a newline.
-h, --help
Print a usage message on standard output and exit successfully.
-V, --version
Print version information on standard output and exit
successfully.
FORMATTING
If the -F option is given, then the output format is determined by the
given format string. Within that string, the following sequences can
be used:
%p Progress bar. Expands to fill the remaining space. Should only
be specified once. Equivalent to -p.
%t Elapsed time. Equivalent to -t.
%e ETA as time remaining. Equivalent to -e.
%I ETA as local time of completion. Equivalent to -I.
%r Current data transfer rate. Equivalent to -r.
%a Average data transfer rate. Equivalent to -a.
%b Bytes transferred so far (or lines if -l was specified).
Equivalent to -b.
%T Percentage of the transfer buffer in use. Equivalent to -T.
Shows "{----}" if the transfer is being done with splice(2),
since splicing to or from pipes does not use the buffer.
%nA Show the last n bytes written (e.g. %16A for the last 16
bytes). Shows only dots if the transfer is being done with
splice(2), since splicing to or from pipes does not use the
buffer.
%N Name prefix given by -N. Padded to 9 characters with spaces,
and suffixed with :.
%% A single %.
The format string equivalent of turning on all display switches is `%N
%b %T %t %r %a %p %e'.
EXIT STATUS
An exit status of 1 indicates a problem with the -R or -P options. Any other exit status is a bitmask of the following: 2 One or more files could not be accessed, stat(2)ed, or opened. 4 An input file was the same as the output file. 8 Internal error with closing a file or moving to the next file. 16 There was an error while transferring data from one or more input files. 32 A signal was caught that caused an early exit. 64 Memory allocation failed. A zero exit status indicates no problems.
AUTHOR
Written by Andrew Wood, with patches submitted by various other people. Please see the package README for a complete list of contributors.
KNOWN PROBLEMS
The following problems are known to exist in pv:
* The -c option does not work properly on Cygwin without cygserver
running, if started near the bottom of the screen (IPC is needed
to handle the terminal scrolling). To fix this, start cygserver
before using pv -c.
* The -R option is not available on Cygwin without cygserver
running (SYSV IPC is needed). To fix this, start cygserver
before running the instance of pv you want, at runtime, to
change the parameters of.
If you find any other problems, please report them.
REPORTING BUGS
Report bugs in pv to pv@ivarch.com or use the contact form linked from the pv home page: <http://www.ivarch.com/programs/pv.shtml>
SEE ALSO
cat(1), dialog(1), splice(2)
LICENSE
This is free software, distributed under the ARTISTIC 2.0 license.
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
