sap(7)


NAME

   sap - Service Access Point specification

DESCRIPTION

   The  text2sap  and  sap2text functions use the format described in this
   man page. Because all standard ATM tools on Linux use  those  functions
   to convert to or from the textual representation of SAP specifications,
   they expect them in the same format too.

   The SAP is divided into two parts: the broadband high layer information
   (BHLI)  and  the  broadband  low  layer  information  (BLLI). A SAP can
   contain one, both, or none of them. In the  latter  case,  the  SAP  is
   usually  considered  as  a  wildcard SAP, i.e. a SAP that is compatible
   with any other SAP.

   Each part begins with its name (bhli or blli), followed by a colon  and
   a   (non-empty)   list   of   attributes,   which   are   of  the  form
   attribute=value. Some  attributes  have  sub-attributes,  which  follow
   them.  Everything  that  isn't separated by a colon or an equal sign is
   separated by a comma.

   Values which are a number of bytes are specified as  the  corresponding
   sequence  of  pairs  of  hex  digits.  The  sequence  can be optionally
   prefixed with 0x. Values with are integers in  a  given  range  can  be
   specified in decimal (no prefix), octal (0 prefix), and hexadecimal (0x
   prefix).

   The following, mutually exclusive attributes are allowed  in  the  bhli
   part  (see  the  corresponding  ATM  Forum  and  ITU  documents for the
   semantics):

   iso=1-8 bytes
          ISO

   user=1-8 bytes
          User-specific

   hlp=4 bytes
          High layer profile.  Note that this attribute only exists on UNI
          3.0. text2sap only recognizes it if your system is configured to
          accept UNI 3.0 message formats.

   oui=3 bytes,id=4 bytes
          Vendor-specific application identifier

   The structure of the bhli part is more complex. It distinguishes  three
   layers,   l1,  l2,  and  l3,  of  which  the  first  one  is  presently
   unsupported.  For  layer  two,  the  following   (mutually   exclusive)
   possibilities exist:

   l2=iso1745
          Basic mode ISO 1745

   l2=q291
          ITU-T Q.291 (Rec. I.441)

   l2=lapb
          Extended LAPB, half-duplex (Rec. T.71)

   l2=iso8802
          LAN LLC (ISO/IEC 8802/2)

   l2=x75 ITU-T X.75, SLP

   l2=x25_ll ...
          ITU-T  X.25,  link  layer.  This  attribute  and  the  following
          attributes through l2=iso7776 can optionally be followed by  one
          or  more  of  the  following  sub-attributes: mode=mode (mode of
          operation, either norm or ext), and window=window  size  (window
          size in k, 1-127).

   l2=x25_ml ...
          ITU-T X.25, multilink

   l2=hdlc_arm ...
          HDLC ARM (ISO/IEC 4335)

   l2=hdlc_nrm ...
          HDLC NRM (ISO/IEC 4335)

   l2=hdlc_abm ...
          HDLC ABM (ISO/IEC 4335)

   l2=q992 ...
          ITU-T Q.922

   l2=iso7776 ...
          ISO 7776 DTE-DTE

   l2=user,info=information
          User-specified. information is an integer in the range 0 to 255.

   For   layer   three,   the   following   (again,   mutually  exclusive)
   possibilities exist:

   l3=iso8473
          ITU-T X.233 | ISO/IEC 8473

   l3=t70 ITU-T T.70 minimum network layer

   l3=h321
          ITU-T Recommendation H.321

   l3=x25 ...
          ITU-T X.25, packet  layer.  This  attribute  and  the  following
          attributes  through l3=x223 can optionally be followed by one or
          more of the following  sub-attributes:  mode=mode  (see  above),
          size=default  packet  size  (4-12,  corresponding  to  16-4096),
          window=window size (see above).

   l3=iso8208 ...
          ISO/IEC 8208

   l3=x223 ...
          ITU-T X.223 | ISO/IEC 8878

   l3=tr9577,ipi=identifier ...
          ISO/IEC TR 9577. identifier is the initial  protocol  identifier
          in  the  range  0-255.  For SNAP (0x80), the keyword snap can be
          used, and the following sub-attributes  have  to  be  specified:
          oui=3 bytes, and pid=2 bytes.

   l2=user,info=information
          User-specified, see above.

   l3=h310 ...
          ITU-T   Recommendation   H.310.   The   sub-attribute  term=type
          (terminal type, rx, tx, or rxtx) is recognized. If  present,  it
          enables  the  two  additional  sub-attributes  fw_mpx=capability
          (forward multiplexing capability, ts,  ts_fec,  ps,  ps_fec,  or
          h221) and bw_mpx=capability. Both are optional.

   Note  that  commas  must  never  follow  colons  or other commas. Also,
   whitespace  is  not   allowed   inside   a   SAP   specification.   SAP
   specifications are case-insensitive. On input, items must be written in
   exactly the order used in this document.

EXAMPLES

   blli:l2=iso8802
          Classical IP over ATM (RFC1577)

   bhli:oui=0x0060D7,id=0x01000001,blli:l2=iso8802
          Arequipa (RFC2170)

   blli:l3=tr9577,ipi=snap,oui=0x00A03E,pid=0x0002
          LAN Emulation

AUTHOR

   Werner Almesberger, EPFL LRC <werner.almesberger@lrc.di.epfl.ch>





Opportunity


Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.

Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.





Free Software


Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.


Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.





Free Books


The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.


Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.





Education


Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.


Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.