wpa_supplicant.conf − configuration file for wpa_supplicant
wpa_supplicant is configured using a text file that lists all accepted networks and security policies, including pre-shared keys. See the example configuration file, probably in /usr/share/doc/wpa_supplicant/, for detailed information about the configuration format and supported fields.
All file paths in this configuration file should use full (absolute, not relative to working directory) path in order to allow working directory to be changed. This can happen if wpa_supplicant is run in the background.
Changes to configuration file can be reloaded be sending SIGHUP signal to wpa_supplicant (’killall -HUP wpa_supplicant’). Similarly, reloading can be triggered with the wpa_cli reconfigure command.
Configuration file can include one or more network blocks, e.g., one for each used SSID. wpa_supplicant will automatically select the best network based on the order of network blocks in the configuration file, network security level (WPA/WPA2 is preferred), and signal strength.
1. |
WPA-Personal (PSK) as home network and WPA-Enterprise with EAP-TLS as work network. |
# allow
frontend (e.g., wpa_cli) to be used by all users in
’wheel’ group
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
#
# home network; allow all valid ciphers
network={
ssid="home" | |
scan_ssid=1 | |
key_mgmt=WPA-PSK | |
psk="very secret passphrase" |
}
#
# work network; use EAP-TLS with WPA; allow only CCMP and
TKIP ciphers
network={
ssid="work" | |
scan_ssid=1 | |
key_mgmt=WPA-EAP | |
pairwise=CCMP TKIP | |
group=CCMP TKIP | |
eap=TLS | |
identity="user@example.com" | |
ca_cert="/etc/cert/ca.pem" | |
client_cert="/etc/cert/user.pem" | |
private_key="/etc/cert/user.prv" | |
private_key_passwd="password" |
}
2. |
WPA-RADIUS/EAP-PEAP/MSCHAPv2 with RADIUS servers that use old peaplabel (e.g., Funk Odyssey and SBR, Meetinghouse Aegis, Interlink RAD-Series) |
ctrl_interface=DIR=/var/run/wpa_supplicant
GROUP=wheel
network={
ssid="example" | |
scan_ssid=1 | |
key_mgmt=WPA-EAP | |
eap=PEAP | |
identity="user@example.com" | |
password="foobar" | |
ca_cert="/etc/cert/ca.pem" | |
phase1="peaplabel=0" | |
phase2="auth=MSCHAPV2" |
}
3. |
EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the unencrypted use. Real identity is sent only within an encrypted TLS tunnel. |
ctrl_interface=DIR=/var/run/wpa_supplicant
GROUP=wheel
network={
ssid="example" | |
scan_ssid=1 | |
key_mgmt=WPA-EAP | |
eap=TTLS | |
identity="user@example.com" | |
anonymous_identity="anonymous@example.com" | |
password="foobar" | |
ca_cert="/etc/cert/ca.pem" | |
phase2="auth=MD5" |
}
4. |
IEEE 802.1X (i.e., no WPA) with dynamic WEP keys (require both unicast and broadcast); use EAP-TLS for authentication |
ctrl_interface=DIR=/var/run/wpa_supplicant
GROUP=wheel
network={
ssid="1x-test" | |
scan_ssid=1 | |
key_mgmt=IEEE8021X | |
eap=TLS | |
identity="user@example.com" | |
ca_cert="/etc/cert/ca.pem" | |
client_cert="/etc/cert/user.pem" | |
private_key="/etc/cert/user.prv" | |
private_key_passwd="password" | |
eapol_flags=3 |
}
5. |
Catch all example that allows more or less all configuration modes. The configuration options are used based on what security policy is used in the selected SSID. This is mostly for testing and is not recommended for normal use. |
ctrl_interface=DIR=/var/run/wpa_supplicant
GROUP=wheel
network={
ssid="example" | |
scan_ssid=1 | |
key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE | |
pairwise=CCMP TKIP | |
group=CCMP TKIP WEP104 WEP40 | |
psk="very secret passphrase" | |
eap=TTLS PEAP TLS | |
identity="user@example.com" | |
password="foobar" | |
ca_cert="/etc/cert/ca.pem" | |
client_cert="/etc/cert/user.pem" | |
private_key="/etc/cert/user.prv" | |
private_key_passwd="password" | |
phase1="peaplabel=0" | |
ca_cert2="/etc/cert/ca2.pem" | |
client_cert2="/etc/cer/user.pem" | |
private_key2="/etc/cer/user.prv" | |
private_key2_passwd="password" |
}
6. |
Authentication for wired Ethernet. This can be used with wired or roboswitch interface (-Dwired or -Droboswitch on command line). |
ctrl_interface=DIR=/var/run/wpa_supplicant
GROUP=wheel
ap_scan=0
network={
key_mgmt=IEEE8021X | |
eap=MD5 | |
identity="user" | |
password="password" | |
eapol_flags=0 |
}
Some EAP authentication methods require use of certificates. EAP-TLS uses both server side and client certificates whereas EAP-PEAP and EAP-TTLS only require the server side certificate. When client certificate is used, a matching private key file has to also be included in configuration. If the private key uses a passphrase, this has to be configured in wpa_supplicant.conf ("private_key_passwd").
wpa_supplicant supports X.509 certificates in PEM and DER formats. User certificate and private key can be included in the same file.
If the user certificate and private key is received in PKCS#12/PFX format, they need to be converted to suitable PEM/DER format for wpa_supplicant. This can be done, e.g., with following commands:
# convert
client certificate and private key to PEM format
openssl pkcs12 -in example.pfx -out user.pem -clcerts
# convert CA certificate (if included in PFX file) to PEM
format
openssl pkcs12 -in example.pfx -out ca.pem -cacerts
-nokeys
wpa_supplicant(8) openssl(1)
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.