xpdf.real(1)
NAME
xpdf - Portable Document Format (PDF) file viewer for X (version 3.04)
SYNOPSIS
xpdf [options] [PDF-file [page | +dest]]
DESCRIPTION
Xpdf is a viewer for Portable Document Format (PDF) files. (These are
also sometimes also called 'Acrobat' files, from the name of Adobe's
PDF software.) Xpdf runs under the X Window System on UNIX, VMS, and
OS/2.
To run xpdf, simply type:
xpdf file.pdf
where file.pdf is your PDF file. The file name can be followed by a
number specifying the page which should be displayed first, e.g.:
xpdf file.pdf 18
You can also give a named destination, prefixed with '+' in place of
the page number. (This is only useful with PDF files that provide
named destination targets.)
You can also start xpdf without opening any files:
xpdf
Various compressed formats (gz, bz2, xz, and Z) are also supported, for
example::
xpdf file.pdf.gz
CONFIGURATION FILE
Xpdf reads a configuration file at startup. It first tries to find the user's private config file, ~/.xpdfrc. If that doesn't exist, it looks for a system-wide config file, /etc/xpdf/xpdfrc. See the xpdfrc(5) man page for details.
OPTIONS
Many of the following options can be set with configuration file
commands or X resources. These are listed in square brackets with the
description of the corresponding command line option.
-g geometry
Set the initial window geometry. (-geometry is equivalent.) [X
resource: Xpdf.geometry]
-title title
Set the window title. By default, the title will be "xpdf:
foo.pdf". [X resource: Xpdf.title]
-cmap Install a private colormap. This is ignored on TrueColor
visuals. [X resource: Xpdf.installCmap]
-rgb number
Set the size of largest RGB cube xpdf will try to allocate. The
default is 5 (for a 5x5x5 cube); set to a smaller number to
conserve color table entries. This is ignored with private
colormaps and on TrueColor visuals. [X resource:
Xpdf.rgbCubeSize]
-rv Set reverse video mode. This reverses the colors of everything
except images. It may not always produce great results for PDF
files which do weird things with color. This also causes the
paper color to default to black. [X resource:
Xpdf.reverseVideo]
-papercolor color
Set the "paper color", i.e., the background of the page display.
This will not work too well with PDF files that do things like
filling in white behind the text. [X resource: Xpdf.paperColor]
-mattecolor color
Set the matte color, i.e., the color used for background outside
the actual page area. (There is a separate setting,
Xpdf.fullScreenMatteColor, for full-screen mode.) [X resource:
Xpdf.matteColor]
-z zoom
Set the initial zoom factor. A number specifies a zoom
percentage, where 100 means 72 dpi. You may also specify
´page', to fit the page to the window size, or ´width', to fit
the page width to the window width, or ´height', to fit the page
height to the window height [config file: initialZoom; or X
resource: Xpdf.initialZoom]
-cont Start in continuous view mode, i.e., with one vertical scroll
bar for the whole document. [config file: continuousView]
-freetype yes | no
Enable or disable FreeType (a TrueType / Type 1 font
rasterizer). This defaults to "yes". [config file:
enableFreeType]
-aa yes | no
Enable or disable font anti-aliasing. This defaults to "yes".
[config file: antialias]
-aaVector yes | no
Enable or disable vector anti-aliasing. This defaults to "yes".
[config file: vectorAntialias]
-ps PS-file
Set the default file name for PostScript output (i.e., the name
which will appear in the print dialog). This can also be of the
form [config file: psFile]
-paper size
Set the paper size to one of "letter", "legal", "A4", or "A3".
This can also be set to "match", which will set the paper size
to match the size specified in the PDF file. [config file:
psPaperSize]
-paperw size
Set the paper width, in points. [config file: psPaperSize]
-paperh size
Set the paper height, in points. [config file: psPaperSize]
-level1
Generate Level 1 PostScript. The resulting PostScript files
will be significantly larger (if they contain images), but will
print on Level 1 printers. This also converts all images to
black and white. [config file: psLevel]
-enc encoding-name
Sets the encoding to use for text output. The encoding-name
must be defined with the unicodeMap command (see xpdfrc(5)).
This defaults to "Latin1" (which is a built-in encoding).
[config file: textEncoding]
-eol unix | dos | mac
Sets the end-of-line convention to use for text output. [config
file: textEOL]
-opw password
Specify the owner password for the PDF file. Providing this
will bypass all security restrictions.
-upw password
Specify the user password for the PDF file.
-fullscreen
Open xpdf in full-screen mode, useful for presentations.
-remote name
Start/contact xpdf remote server with specified name (see the
REMOTE SERVER MODE section below).
-exec command
Execute a command (see the COMMANDS section below) in an xpdf
remote server window (with -remote only).
-reload
Reload xpdf remote server window (with -remote only).
-raise Raise xpdf remote server window (with -remote only).
-quit Kill xpdf remote server (with -remote only).
-cmd Print commands as they're executed (useful for debugging).
[config file: printCommands]
-q Don't print any messages or errors. [config file: errQuiet]
-cfg config-file
Read config-file in place of ~/.xpdfrc or the system-wide config
file.
-v Print copyright and version information.
-h Print usage information. (-help and --help are equivalent.)
-m file1 file2 ...
Open multiple pdf files: file1 file2 ... etc. NOTE: The list
of files is terminated once an argument starting with a dash is
encountered. In order to view file names starting with a dash,
simply append "./". -m may be used multiple times.
Several other standard X options and resources will work as expected:
-display display
[X resource: Xpdf.display]
-fg color
(-foreground is equivalent.) [X resource: xpdf*Foreground]
-bg color
(-background is equivalent.) [X resource: xpdf*Background]
-font font
(-fn is equivalent.) [X resource: xpdf*fontList]
The color and font options only affect the user interface elements, not
the PDF display (the 'paper').
The following X resources do not have command line option equivalents:
Xpdf.toolTipEnable
Enables (if set to true) or disables (if set to false) the tool-
tips on the toolbar buttons.
Xpdf.fullScreenMatteColor
Sets the matte color to be used in full-screen mode. The
default setting is "black".
CONTROLS
On-screen controls, at the bottom of the xpdf window
left/right arrow buttons
Move to the previous/next page.
double left/right arrow buttons
Move backward or forward by ten pages.
dashed left/right arrow buttons
Move backward or forward along the history path.
'Page' entry box
Move to a specific page number. Click in the box to activate
it, type the page number, then hit return.
zoom popup menu
Change the zoom factor (see the description of the -z option
above).
binoculars button
Find a text string.
print button
Bring up a dialog for generating a PostScript file. The dialog
has options to set the pages to be printed and the PostScript
file name. The file name can be '-' for stdout or '|command' to
pipe the PostScript through a command, e.g., '|lpr'.
'?' button
Bring up the 'about xpdf' window.
link info
The space between the '?' and 'Quit' buttons is used to show the
URL or external file name when the mouse is over a link.
'Quit' button
Quit xpdf.
Menu
Pressing the right mouse button will post a popup menu with the
following commands:
Open...
Open a new PDF file via a file requester.
Open in new window...
Create a new window and open a new PDF file via a file
requester.
Reload Reload the current PDF file. Note that Xpdf will reload the
file automatically (on a page change or redraw) if it has
changed since it was last loaded.
Save as...
Save the current file via a file requester.
Continuous view
Toggles between single page and continuous view modes.
Rotate counterclockwise
Rotate the page 90 degrees counterclockwise.
Rotate clockwise
Rotate the page 90 degrees clockwise. The two rotate commands
are intended primarily for PDF files where the rotation isn't
correctly specified in the file.
Zoom to selection
Zoom in to the currently selected rectangle.
Close Close the current window. If this is the only open window, the
document is closed, but the window is left open (i.e., this menu
command won't quit xpdf).
Quit Quit xpdf.
Outline
If the PDF contains an outline (a.k.a., bookmarks), there will be an
outline pane on the left side of the window. The width of the outline
pane is adjustable with a vertical split bar via the knob near its
bottom end.
Text selection
Dragging the mouse with the left button held down will highlight an
arbitrary rectangle. Any text inside this rectangle will be copied to
the X selection buffer.
Links
Clicking on a hyperlink will jump to the link's destination. A link to
another PDF document will make xpdf load that document. A 'launch'
link to an executable program will display a dialog, and if you click
'ok', execute the program. URL links call an external command (see the
WEB BROWSERS section below).
Panning
Dragging the mouse with the middle button held down pans the window.
Key bindings
o Open a new PDF file via a file requester.
r Reload the current PDF file. Note that Xpdf will reload the
file automatically (on a page change or redraw) if it has
changed since it was last loaded.
control-L
Redraw the current page.
control-W
Close the current window.
f or control-F
Find a text string.
control-G
Find next occurrence.
control-P
Print.
n Move to the next page. Scrolls to the top of the page, unless
scroll lock is turned on.
p Move to the previous page. Scrolls to the top of the page,
unless scroll lock is turned on.
<Space> or <PageDown> or <Next>
Scroll down on the current page; if already at bottom, move to
next page.
<Backspace> or <Delete> or <PageUp> or <Previous>
Scroll up on the current page; if already at top, move to
previous page.
v Move forward along the history path.
b Move backward along the history path.
<Home> Scroll to top of current page.
<End> Scroll to bottom of current page.
control-<Home>
Scroll to first page of document.
control-<End>
Scroll to last page of document.
arrows Scroll the current page.
g Activate the page number text field ("goto page").
0 Set the zoom factor to 125%.
+ Zoom in (increment the zoom factor by 1).
- Zoom out (decrement the zoom factor by 1).
z Set the zoom factor to 'page' (fit page to window).
w Set the zoom factor to 'width' (fit page width to window).
h Set the zoom factor to 'height' (fit page height to window).
alt-F Toggle full-screen mode.
q Quit xpdf.
WEB BROWSERS
If you want to run xpdf automatically from netscape or mosaic (and
probably other browsers) when you click on a link to a PDF file, you
need to edit (or create) the files .mime.types and .mailcap in your
home directory. In .mime.types add the line:
application/pdf pdf
In .mailcap add the lines:
# Use xpdf to view PDF files.
application/pdf; xpdf -q %s
Make sure that xpdf is on your executable search path.
When you click on a URL link in a PDF file, xpdf will execute the
command specified by the urlCommand config file option, replacing an
occurrence of '%s' with the URL. For example, to call netscape with
the URL, add this line to your config file:
urlCommand "netscape -remote 'openURL(%s)'"
COMMANDS
Xpdf's key and mouse bindings are user-configurable, using the bind and unbind options in the config file (see xpdfrc(5)). The bind command allows you to bind a key or mouse button to a sequence of one or more commands. Available Commands The following commands are supported: gotoPage(page) Go to the specified page. gotoPageNoScroll(page) Go to the specified page, with the current relative scroll position. gotoDest(dest) Go to a named destination. gotoLastPage Go to the last page in the PDF file. gotoLastPageNoScroll Go to the last page in the PDF file, with the current relative scroll position. nextPage Go to the next page. nextPageNoScroll Go to the next page, with the current relative scroll position. prevPage Go to the previous page. prevPageNoScroll Go to the previous page, with the current relative scroll position. pageUp Scroll up by one screenful. pageDown Scroll down by one screenful. scrollLeft(n) Scroll left by n pixels. scrollRight(n) Scroll right by n pixels. scrollUp(n) Scroll up by n pixels. scrollDown(n) Scroll down by n pixels. scrollUpPrevPage(n) Scroll up by n pixels, moving to the previous page if appropriate. scrollDownPrevPage(n) Scroll down by n pixels, moving to the next page if appropriate. scrollToTopEdge Scroll to the top edge of the current page, with no horizontal movement. scrollToBottomEdge Scroll to the bottom edge of the current page, with no horizontal movement. scrollToLeftEdge Scroll to the left edge of the current page, with no vertical movement. scrollToRightEdge Scroll to the right edge of the current page, with no vertical movement. scrollToTopLeft Scroll to the top-left corner of the current page. scrollToBottomRight Scroll to the bottom-right corner of the current page. goForward Move forward along the history path. goBackward Move backward along the history path. zoomPercent(z) Set the zoom factor to z%. zoomFitPage Set the zoom factor to fit-page. zoomFitWidth Set the zoom factor to fit-width. zoomFitHeight Set the zoom factor to fit-height. zoomIn Zoom in - go to the next higher zoom factor. zoomOut Zoom out - go the next lower zoom factor. rotateCW Rotate the page 90 degrees clockwise. rotateCCW Rotate the page 90 degrees counterclockwise. setSelection(pg,ulx,uly,lrx,lry) Set the selection to the specified coordinates on the specified page. continuousMode Go to continuous view mode. singlePageMode Go to single-page view mode. toggleContinuousMode Toggle between continuous and single page view modes. fullScreenMode Go to full-screen mode. windowMode Go to window (non-full-screen) mode. toggleFullScreenMode Toggle between full-screen and window modes. open Open a PDF file in this window, using the open dialog. openInNewWin Open a PDF file in a new window, using the open dialog. openFile(file) Open a specified PDF file in this window. openFileInNewWin(file) Open a specified PDF file in a new window. openFileAtDest(file,dest) Open a specified PDF file in this window and go to a named destination. openFileAtDestInNewWin(file,dest) Open a specified PDF file in a new window and go to a named destination. reload Reload the current PDF file. redraw Redraw the window. raise Raise the window to the front. closeWindow Close the window. If this was the last open window, clear the window, but don't quit from Xpdf. closeWindowOrQuit Close the window. If this was the last open window, quit from Xpdf. run(external-command-string) Run an external command. The following escapes are allowed in the command string: %f => PDF file name (or an empty string if no file is open) %b => PDF file base name, i.e., file name minus the extension (or an empty string if no file is open) %u => link URL (or an empty string if not over a URL link) %p => current page number (or an empty string if no file is open) %x => selection upper-left x coordinate (or 0 if there is no selection) %y => selection upper-left y coordinate (or 0 if there is no selection) %X => selection lower-right x coordinate (or 0 if there is no selection) %Y => selection lower-right y coordinate (or 0 if there is no selection) %i => page containing the mouse pointer %j => x coordinate of the mouse pointer %k => y coordinate of the mouse pointer %% => % The external command string will often contain spaces, so the whole command must be quoted in the xpdfrc file: bind x "run(ls -l)" openOutline Open the outline pane. closeOutline Close the outline pane. toggleOutline Toggle the outline pane between open and closed. scrollOutlineDown(n) Scroll the outline down by n increments. scrollOutlineUp(n) Scroll the outline up by n increments. focusToDocWin Set the keyboard focus to the main document window. focusToPageNum Set the keyboard focus to the page number text box. find Open the 'find' dialog. findNext Finds the next occurrence of the search string (no dialog). print Open the 'print' dialog. about Open the 'about' dialog. quit Quit from xpdf. The following commands depend on the current mouse position: startSelection Start a selection, which will be extended as the mouse moves. endSelection End a selection. startPan Start a pan, which will scroll the document as the mouse moves endPan End a pan. postPopupMenu Display the popup menu. followLink Follow a hyperlink (does nothing if the mouse is not over a link). followLinkInNewWin Follow a hyperlink, opening PDF files in a new window (does nothing if the mouse is not over a link). For links to non-PDF files, this command is identical to followLink. followLinkNoSel Same as followLink, but does nothing if there is a non-empty selection. (This is useful as a mouse button binding.) followLinkInNewWinNoSel Same as followLinkInNewWin, but does nothing if there is a non- empty selection. (This is useful as a mouse button binding.) Default Bindings The default mouse bindings are as follows: bind mousePress1 any startSelection bind mouseRelease1 any endSelection followLinkNoSel bind mousePress2 any startPan bind mouseRelease2 any endPan bind mousePress3 any postPopupMenu bind mousePress4 any scrollUpPrevPage(16) bind mousePress5 any scrollDownNextPage(16) bind mousePress6 any scrollLeft(16) bind mousePress7 any scrollRight(16) The default key bindings are as follows: bind ctrl-home any gotoPage(1) bind home any scrollToTopLeft bind ctrl-end any gotoLastPage bind end any scrollToBottomRight bind pgup any pageUp bind backspace any pageUp bind delete any pageUp bind pgdn any pageDown bind space any pageDown bind left any scrollLeft(16) bind right any scrollRight(16) bind up any scrollUp(16) bind down any scrollDown(16) bind o any open bind O any open bind r any reload bind R any reload bind f any find bind F any find bind ctrl-f any find bind ctrl-g any findNext bind ctrl-p any print bind n scrLockOff nextPage bind N scrLockOff nextPage bind n scrLockOn nextPageNoScroll bind N scrLockOn nextPageNoScroll bind p scrLockOff prevPage bind P scrLockOff prevPage bind p scrLockOn prevPageNoScroll bind P scrLockOn prevPageNoScroll bind v any goForward bind b any goBackward bind g any focusToPageNum bind 0 any zoomPercent(125) bind + any zoomIn bind - any zoomOut bind z any zoomFitPage bind w any zoomFitWidth bind h any zoomFitHeight bind alt-f any toggleFullScreenMode bind ctrl-l any redraw bind ctrl-w any closeWindowOrQuit bind ? any about bind q any quit bind Q any quit Previous versions of xpdf included a "viKeys" X resource. It is no longer available, but the following bindings are equivalent: bind h any scrollLeft(16) bind l any scrollRight(16) bind k any scrollUp(16) bind j any scrollDown(16)
REMOTE SERVER MODE
Xpdf can be started in remote server mode by specifying a server name
(in addition to the file name and page number). For example:
xpdf -remote myServer file.pdf
If there is currently no xpdf running in server mode with the name
'myServer', a new xpdf window will be opened. If another command:
xpdf -remote myServer another.pdf 9
is issued, a new copy of xpdf will not be started. Instead, the first
xpdf (the server) will load another.pdf and display page nine. If the
file name is the same:
xpdf -remote myServer another.pdf 4
the xpdf server will simply display the specified page.
The -raise option tells the server to raise its window; it can be
specified with or without a file name and page number.
The -quit option tells the server to close its window and exit.
EXIT CODES
The Xpdf tools use the following exit codes: 0 No error. 1 Error opening a PDF file. 2 Error opening an output file. 3 Error related to PDF permissions. 99 Other error.
AUTHOR
The xpdf software and documentation are copyright 1996-2014 Glyph & Cog, LLC.
SEE ALSO
pdftops(1), pdftotext(1), pdftohtml(1), pdfinfo(1), pdffonts(1), pdfdetach(1), pdftoppm(1), pdftopng(1), pdfimages(1), xpdfrc(5) http://www.foolabs.com/xpdf/ 28 May 2014 xpdf(1)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
