aemv(1)
NAME
aegis move file - rename one or more files as part of a change
SYNOPSIS
aegis -MoVe_file [ option... ] old-name new-name [ old1 new1 [ old2
new2 ] ]
aegis -MoVe_file -List [ option... ]
aegis -MoVe_file -Help
DESCRIPTION
The aegis -MoVe_file command is used to copy a file into a change and
change its name at the same time.
The named files will be copied from the baseline (old-file) into the
development directory (new-file), and added to the list of files in
the change.
Warning: If there is already files in the development directory of
either the old-name or the new-name they will be overwritten.
The old-file in the development directory will contain 1KB of random
text. The random text is sufficiently revolting that most compilers
will give error messages, should the file be referenced accidentally.
This is often very helpful when moving include files.
You may rename directories. All the files in the old-name directory
tree will be renamed to be below the new-name directory tree.
File Name Interpretation
The aegis program will attempt to determine the project file names
from the file names given on the command line. All file names are
stored within aegis projects as relative to the root of the baseline
directory tree. The development directory and the integration
directory are shadows of this baseline directory, and so these
relative names apply here, too. Files named on the command line are
first converted to absolute paths if necessary. They are then
compared with the baseline path, the development directory path, and
the integration directory path, to determine a baseline-relative name.
It is an error if the file named is outside one of these directory
trees.
The -BAse_RElative option may be used to cause relative filenames to
be interpreted as relative to the baseline path; absolute filenames
will still be compared with the various paths in order to determine a
baseline-relative name.
The relative_filename_preference in the user configuration file may be
used to modify this default behavior. See aeuconf(5) for more
information.
Process Side Effects
This command will cancel any build or test registrations, because
adding another file logically invalidates them.
When the change files are listed (aegis -List Change_Files -TERse) the
new files (new-name) will appear in the listing, and the removed files
(old-name) will not appear in the terse listing. Similarly, when the
project files are listed with an explicit change number (aegis -List
Project_Files -TERse -Change N) none of the change's files, including
both the new and removed files, will appear in the terse listing.
These two features are very helpful when calling aegis from within a
DMT to generate the list of source files.
Notification
The new_file_command and remove_file_command in the project config
file are run, if set. The project_file_command is also run, if set,
and if there has been an integration recently. See aepconf(5) for
more information.
WHITEOUT
Aegis provides you with what is often called a "view path" which
indicates to development tools (compilers, build systems, etc) look
first in the development directory, then in the branch baseline, and
so on up to the trunk baseline.
The problem with view paths is that in order to remove files, you need
some kind of "whiteout" to say "stop looking, it's been removed."
When you user the aerm(1) or aemv(1) commands, this means "add
information to this change which will remove the file from the
baseline when this change is integrated". I.e. while the change is in
the being developed state, the file is only "removed" in the
development directory - it's still present in the baseline, and will
be until the change is successfully integrated.
When you use the aerm(1) or aemv(1) commands, Aegis will create a 1K
file to act as the whiteout. It's contents are rather ugly so that if
you compile or include the "removed" file accidentally, you get a
fatal error. This will remind you to remove obsolete references.
When the change in integrated, the removed file is not copied/linked
from the baseline to the integration directory, and is not copied from
the development directory. At this time it is physically gone (no
whiteout). It is assumed that because of the error inducing whiteout
all old references were found and fixed while the change was in the
being developed state.
File Manifests
When generating list of files to be compiled or linked, it is
important that the file manifest be generated from information known
by Aegis, rather than from the file system. This is for several
reasons:
(a) Aegis knows exactly what (source) files are where, whereas
everything else is inferring Aegis' knowledge; and
(b) looking in the file system is hard when the view path is longer
that 2 directories (and Aegis' branching method can make it
arbitrarily long); and
(c) The whiteout files, and anything else left "lying around", will
confuse any method which interrogates the file system.
The easiest way to use Aegis' file knowledge is with something like an
awk(1) script processing the Aegis file lists. For example, you can
do this with make(1) as follows:
# generate the file manifest
manifest.make.inc: manifest.make.awk
( aegis -l cf -ter ; aegis -l pf -ter ) | \
awk -f manifest.make.awk > manifest.make.inc
# now include the file manifest
include manifest.make.inc
Note: this would be inefficient of you did it once per directory, but
there is nothing stopping you writing numerous assignments into the
manifest.make.inc file, all in one pass.
It is possible to do the same thing with Aegis' report generator (see
aer(1) for more information), but this is more involved than the
awk(1) script. However, with the information "straight from the
horse's mouth" as it were, it can also be much smarter.
This file manifest would become out-of-date without an interlock to
Aegis' file operations commands. By using the project-file_command
and change_file_command fields of the project config file (see
aepconf(5) for more information), you can delete this file at
strategic times.
/* run when the change file manifest is altered */
change_file_command = "rm -f manifest.make.inc";
/* run when the project file manifest is altered */
project_file_command = "rm -f manifest.make.inc";
The new file manifest will thus be re-built during the next aeb(1)
command.
Options and Preferences
There is a -No-WhiteOut option, which may be used to suppress whiteout
files when you use the aerm(1) and aemv(1) commands. There is a
corresponding -WhiteOut option, which is usually the default.
There is a whiteout_preference field in the user preferences file (see
aeuconf(5) for more information) if you want to set this option more
permanently.
Whiteout File Templates
The whiteout_template field of the project config file may be used to
produce language-specific error files. If no whiteout template entry
matches, a very ugly 1KB file will be produced - it should induce
compiler errors for just about any language.
If you want a more human-readable error message, entries such as
whiteout_template =
[
{
pattern = [ "*.[ch]" ];
body = "#error This file has been removed.";
}
];
can be very effective (this example assumes gcc(1) is being used).
If it is essential that no whiteout file be produced, say for C source
files, you could use a whiteout template such as
whiteout_template =
[
{ pattern = [ "*.c" ]; }
];
because an absent body sub-field means generate no whiteout file at
all.
You may have more than one whiteout template entry, but note that the
order of the entries is important. The first entry which matches will
be used.
Notification
On successful completion of this command, the notifications usually
performed by the aerm(1), aenf(1) and aent(1) commands are run, as
appropriate. These include the project_file_command, new_file_
command, new_test_command and remove_file_command fields of the
project config file. See aepconf(5) for more information.
OPTIONS
The following options are understood:
-Change number
This option may be used to specify a particular change within
a project. See aegis(1) for a complete description of this
option.
-Help
This option may be used to obtain more information about how
to use the aegis program.
-List
This option may be used to obtain a list of suitable subjects
for this command. The list may be more general than expected.
-Not_Logging
This option may be used to disable the automatic logging of
output and errors to a file. This is often useful when
several aegis commands are combined in a shell script.
-Project name
This option may be used to select the project of interest.
When no -Project option is specified, the AEGIS_PROJECT
environment variable is consulted. If that does not exist,
the user's $HOME/.aegisrc file is examined for a default
project field (see aeuconf(5) for more information). If that
does not exist, when the user is only working on changes
within a single project, the project name defaults to that
project. Otherwise, it is an error.
-TERse
This option may be used to cause listings to produce the bare
minimum of information. It is usually useful for shell
scripts.
-Verbose
This option may be used to cause aegis to produce more output.
By default aegis only produces output on errors. When used
with the -List option this option causes column headings to be
added.
-Wait This option may be used to require Aegis commands to wait for
access locks, if they cannot be obtained immediately.
Defaults to the user's lock_wait_preference if not specified,
see aeuconf(5) for more information.
-No_Wait
This option may be used to require Aegis commands to emit a
fatal error if access locks cannot be obtained immediately.
Defaults to the user's lock_wait_preference if not specified,
see aeuconf(5) for more information.
-WhiteOut
This option may be used to request that deleted files be
replaced by a "whiteout" file in the development directory.
The idea is that compiling such a file will result in a fatal
error, in order that all references may be found. This is
usually the default.
-No_WhiteOut
This option may be used to request that no "whiteout" file be
placed in the development directory.
See also aegis(1) for options common to all aegis commands.
All options may be abbreviated; the abbreviation is documented as the
upper case letters, all lower case letters and underscores (_) are
optional. You must use consecutive sequences of optional letters.
All options are case insensitive, you may type them in upper case or
lower case or a combination of both, case is not important.
For example: the arguments "-project, "-PROJ" and "-p" are all
interpreted to mean the -Project option. The argument "-prj" will not
be understood, because consecutive optional characters were not
supplied.
Options and other command line arguments may be mixed arbitrarily on
the command line, after the function selectors.
The GNU long option names are understood. Since all option names for
aegis are long, this means ignoring the extra leading '-'. The
"--option=value" convention is also understood.
RECOMMENDED ALIAS
The recommended alias for this command is
csh% alias aemv 'aegis -mv \!* -v'
sh$ aemv(){aegis -mv "$@" -v}
ERRORS
It is an error if the change is not in the being developed state.
It is an error if the change is not assigned to the current user.
It is an error if either file is already in the change.
EXIT STATUS
The aegis command will exit with a status of 1 on any error. The
aegis command will only exit with a status of 0 if there are no
errors.
ENVIRONMENT VARIABLES
See aegis(1) for a list of environment variables which may affect this
command. See aepconf(5) for the project configuration file's
project_specific field for how to set environment variables for all
commands executed by Aegis.
SEE ALSO
aecp(1) copy files into a change
aedb(1) begin development of a change
aemvu(1)
undo the rename files as part of a change
aenf(1) add files to be created by a change
aenfu(1)
remove files to be created by a change
aerm(1) add files to be deleted by a change
aermu(1)
remove files to be deleted by a change
aeuconf(5)
user configuration file format
COPYRIGHT
aegis version 4.24.3.D001
Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter
Miller
The aegis program comes with ABSOLUTELY NO WARRANTY; for details use
the 'aegis -VERSion License' command. This is free software and you
are welcome to redistribute it under certain conditions; for details
use the 'aegis -VERSion License' command.
AUTHOR
Peter Miller E-Mail: millerp@canb.auug.org.au
/\/\* WWW: http://www.canb.auug.org.au/~millerp/
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
