cpupower-monitor(1)
NAME
cpupower-monitor - Report processor frequency and idle statistics
SYNOPSIS
cpupower monitor -l cpupower monitor [-c][-m <mon1>,[<mon2>,...]] [-i seconds] cpupower monitor [-c][-m <mon1>,[<mon2>,...]] command
DESCRIPTION
cpupower-monitor reports processor topology, frequency and idle power state statistics. Either command is forked and statistics are printed upon its completion, or statistics are printed periodically. cpupower-monitor implements independent processor sleep state and frequency counters. Some are retrieved from kernel statistics, some are directly reading out hardware registers. Use -l to get an overview which are supported on your system.
Options
-l
List available monitors on your system. Additional details about
each monitor are shown:
* The name in quotation marks which can be passed to the -m
parameter.
* The number of different counters the monitor supports in
brackets.
* The amount of time in seconds the counters might overflow,
due to implementation constraints.
* The name and a description of each counter and its
processor hierarchy level coverage in square brackets:
* [T] -> Thread
* [C] -> Core
* [P] -> Processor Package (Socket)
* [M] -> Machine/Platform wide counter
-m <mon1>,<mon2>,...
Only display specific monitors. Use the monitor string(s) provided
by -l option.
-i seconds
Measure intervall.
-c
Schedule the process on every core before starting and ending
measuring. This could be needed for the Idle_Stats monitor when no
other MSR based monitor (has to be run on the core that is
measured) is run in parallel. This is to wake up the processors
from deeper sleep states and let the kernel re -account its cpuidle
(C-state) information before reading the cpuidle timings from
sysfs.
command
Measure idle and frequency characteristics of an arbitrary
command/workload. The executable command is forked and upon its
exit, statistics gathered since it was forked are displayed.
-v
Increase verbosity if the binary was compiled with the DEBUG option
set.
MONITOR DESCRIPTIONS
Idle_Stats Shows statistics of the cpuidle kernel subsystem. Values are retrieved from /sys/devices/system/cpu/cpu*/cpuidle/state*/. The kernel updates these values every time an idle state is entered or left. Therefore there can be some inaccuracy when cores are in an idle state for some time when the measure starts or ends. In worst case it can happen that one core stayed in an idle state for the whole measure time and the idle state usage time as exported by the kernel did not get updated. In this case a state residency of 0 percent is shown while it was 100. Mperf The name comes from the aperf/mperf (average and maximum) MSR registers used which are available on recent X86 processors. It shows the average frequency (including boost frequencies). The fact that on all recent hardware the mperf timer stops ticking in any idle state it is also used to show C0 (processor is active) and Cx (processor is in any sleep state) times. These counters do not have the inaccuracy restrictions the "Idle_Stats" counters may show. May work poorly on Linux-2.6.20 through 2.6.29, as the acpi-cpufreq kernel frequency driver periodically cleared aperf/mperf registers in those kernels. Nehalem SandyBridge HaswellExtended Intel Core and Package sleep state counters. Threads (hyperthreaded cores) may not be able to enter deeper core states if its sibling is utilized. Deepest package sleep states may in reality show up as machine/platform wide sleep states and can only be entered if all cores are idle. Look up Intel manuals (some are provided in the References section) for further details. The monitors are named after the CPU family where the sleep state capabilities got introduced and may not match exactly the CPU name of the platform. For example an IvyBridge processor has sleep state capabilities which got introduced in Nehalem and SandyBridge processor families. Thus on an IvyBridge processor one will get Nehalem and SandyBridge sleep state monitors. HaswellExtended extra package sleep state capabilities are available only in a specific Haswell (family 0x45) and probably also other future processors. Fam_12h Fam_14h AMD laptop and desktop processor (family 12h and 14h) sleep state counters. The registers are accessed via PCI and therefore can still be read out while cores have been offlined. There is one special counter: NBP1 (North Bridge P1). This one always returns 0 or 1, depending on whether the North Bridge P1 power state got entered at least once during measure time. Being able to enter NBP1 state also depends on graphics power management. Therefore this counter can be used to verify whether the graphics' driver power management is working as expected.
EXAMPLES
cpupower monitor -l" may show:
Monitor "Mperf" (3 states) - Might overflow after 922000000 s
...
Monitor "Idle_Stats" (3 states) - Might overflow after 4294967295 s
...
cpupower monitor -m "Idle_Stats,Mperf" scp /tmp/test /nfs/tmp
Monitor the scp command, show both Mperf and Idle_Stats states counter
statistics, but in exchanged order.
Be careful that the typical command to fully utilize one CPU by doing:
cpupower monitor cat /dev/zero >/dev/null
Does not work as expected, because the measured output is redirected to
/dev/null. This could get workarounded by putting the line into an own,
tiny shell script. Hit CTRL-c to terminate the command and get the
measure output displayed.
REFERENCES
"BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Processors" http://support.amd.com/us/Processor_TechDocs/43170.pdf "Intel Turbo Boost Technology in Intel Core Microarchitecture (Nehalem) Based Processors" http://download.intel.com/design/processor/applnots/320354.pdf "Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3B: System Programming Guide" http://www.intel.com/products/processor/manuals
FILES
/dev/cpu/*/msr /sys/devices/system/cpu/cpu*/cpuidle/state*/.
SEE ALSO
powertop(8), msr(4), vmstat(8)
AUTHORS
Written by Thomas Renninger <trenn@suse.de>
Nehalem, SandyBridge monitors and command passing
based on turbostat.8 from Len Brown <len.brown@intel.com>
22/02/2011 CPUPOWER-MONITOR(1)
Opportunity
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
Free Books
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Education
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.
