VirtualBindings --- Bindings for virtual mouse and key events "VirtualBindings" "default bindings" "VirtualBindings"
The Motif reference pages describe key translations in terms of virtual bindings, based on those described in the Motif Style Guide. Bindings for osf Keysyms Keysym strings that begin with <osf> are not part of the X server's keyboard mapping. Instead, these keysyms are produced on the client side at run time. They are interpreted by the routine XmTranslateKey, and are used by the translation manager when the server delivers an actual key event. For each application, a mapping is maintained between <osf> keysyms and keysyms that correspond to actual keys. This mapping is based on information obtained at application startup from one of the following sources, listed in order of precedence: * The XmNdefaultVirtualBindings resource from Display. * A property on the root window, which can be set by mwm on startup, or by the xmbind client, or on prior startup of a Motif application. * The file .motifbind in the user's home directory. * A set of bindings based on the vendor string and optionally the vendor release of the X server. Motif searches for these bindings in the following steps: 0. If the file xmbind.alias exists in the user's home directory, Motif searches this file for a pathname associated with the vendor string or with the vendor string and vendor release. If it finds such a pathname and if that file exists, Motif loads the bindings contained in that file. 1. If it has found no bindings, Motif next looks for the file xmbind.alias in the directory specified by the environment variable XMBINDDIR, if XMBINDDIR is set, or in the directory /usr/lib/Xm/bindings if XMBINDDIR is not set. If this file exists Motif searches it for a pathname associated with the vendor string or with the vendor string and vendor release. If it finds such a pathname and if that file exists, Motif loads the bindings contained in that file. 2. If it still has found no bindings, Motif loads a set of hard-coded fallback bindings. The xmbind.alias file contains zero or more lines of the following form: "vendor_string[ vendor_release]" bindings_file where vendor_string is the X server vendor name as returned by the X client xdpyinfo or the Xlib function XServerVendor, and must appear in double quotes. If vendor_release is included, it is the X server vendor release number as returned by the X client xdpyinfo or the Xlib function XVendorRelease, and must also be contained within the double quotes separated by one space from vendor_string. The vendor_release argument is provided to allow support of changes in keyboard hardware from a vendor, assuming that the vendor increments the release number to flag such changes. Alternatively, the vendor may simply use a unique vendor string for each different keyboard. The bindings_file argument is the pathname of the file containing the bindings themselves. It can be a relative or absolute pathname. If it it is a relative pathname, it is relative to the location of the xmbind.alias file. Comment lines in the xmbind.alias file begin with ! (exclamation point). The bindings found in either the .motifbind file or the vendor mapping are placed in a property on the root window. This property is used to determine the bindings for subsequent Motif applications. On startup mwm attempts to load the file .motifbind in the user's home directory. If this is unsuccessful, it loads the vendor bindings as described previously. It places the bindings it loads in a property on the root window for use by subsequent Motif applications. The xmbind function loads bindings from a file if that file is specified on the command line. If no file is specified on the command line, it attempts to load the file .motifbind in the user's home directory. If this fails, it loads the vendor bindings as described previously. It places the bindings it loads in a property on the root window for use by subsequent Motif applications. The format of the specification for mapping <osf> keysyms to actual keysyms is similar to that of a specification for an event translation. (See below) The syntax is specified (and below) here in EBNF notation using the following conventions: [a] Means either nothing or a {a} Means zero or more occurrences of a (a|b) Means either a or b. Terminals are enclosed in double quotation marks. The syntax of an <osf> keysym binding specification is as follows: binding_spec = {line "\n"} [line] line = virtual_keysym ":" list_of_key_event list_of_key_event= key_event { "," key_event} key_event = {modifier_name} "<Key>" actual_keysym virtual_keysym = keysym actual_keysym = keysym keysym = A valid X11 keysym name that is mapped by XStringToKeysym As with event translations, more specific event descriptions must precede less specific descriptions. For example, an event description for a key with a modifier must precede a description for the same key without the same modifier. Following is an example of a specification for the defaultVirtualBindings resource in a resource file: *defaultVirtualBindings: \ osfBackSpace: <Key>BackSpace \n\ osfInsert: <Key>InsertChar \n\ osfDelete: <Key>DeleteChar \n\ ... osfLeft: <Key>left, Ctrl<Key>H The format of a .motifbind file or of a file containing vendor bindings is the same, except that the binding specification for each keysym is placed on a separate line. The previous example specification appears as follows in a .motifbind or vendor bindings file: osfBackSpace: <Key>BackSpace osfInsert: <Key>InsertChar osfDelete: <Key>DeleteChar ... osfLeft: <Key>left, Ctrl<Key>H The following table lists the fixed fallback default bindings for <osf> keysyms. Fallback Default Bindings for osf Keysyms <osf Keysym> Fallback Default Binding <osfActivate>: <Key>KP_Enter, <Key>Execute <osfAddMode>: Shift<Key>F8 <osfBackSpace>: <Key>BackSpace <osfBeginLine>: <Key>Home, <Key>Begin <osfCancel>: <Key>Escape, <Key>Cancel <osfClear>: <Key>Clear <osfCopy>: unbound <osfCut>: unbound <osfDelete>: <Key>Delete <osfDeselectAll>: unbound <osfDown>: <Key>Down <osfEndLine>: <Key>End <osfHelp>: <Key>F1, <Key>Help <osfInsert>: <Key>Insert <osfLeft>: <Key>Left <osfLeftLine>: unbound <osfMenu>: Shift<Key>F10, <Key>Menu <osfMenuBar>: <Key>F10, Shift<Key>Menu <osfNextMinor>: unbound <osfPageDown>: <Key>Next <osfPageLeft>: unbound <osfPageRight>: unbound <osfPageUp>: <Key>Prior <osfPaste>: unbound <osfPrimaryPaste>: unbound <osfPriorMinor>: unbound <osfReselect>: unbound <osfRestore>: unbound <osfRight>: <Key>Right <osfRightLine>: unbound <osfSelect>: <Key>Select <osfSelectAll>: unbound <osfSwitchDirection>: Alt<Key>Return, Alt<Key>KP_Enter <osfUndo>: <Key>Undo <osfUp>: <Key>Up Changes in the Handling of Shifted Keys In conjunction with MIT X11R5 Patch 24, this version of Motif introduces a change in the way that keys involving the <Shift> modifier are processed. This change allows the numeric keypad to be used to generate numbers using the standard X mechanisms. Since the default behavior is now to honor the xmodmap keymap bindings, translations and virtual key bindings that use <Shift> may behave differently. A common symptom is that unshifted keypad and function keys (with or without other modifiers) produce the expected results, but shifted ones do not. To obtain the old behavior you can remove the shifted interpretation from problematic keys using the xmodmap utility. Each entry in a xmodmap keymap table contains up to four keysym bindings. The second and fourth keysyms are for shifted keys. If an expression contains only two keysyms, simply remove the second keysym. If an entry contains three or more keysyms, replace the second keysym with NoSymbol and remove the fourth keysym. Action Translations The translation table syntax used by Motif is completely specified in the X11R5 Toolkit Intrinsics Documentation. For the complete syntax description, and for general instructions about writing or modifying a translation table, please refer to this document. A brief summary of the translation table format, however, is included below. The syntax is defined as in the binding syntax specification above. Informal descriptions are contained in angle brackets (<>). TranslationTable= [ directive ] { production } directive = ( "#replace" | "#override" | "#augment") "\n" production = lhs ":" rhs "\n" lhs = ( event | keyseq) {"," ( event | keyseq) } keyseq = """ keychar { keychar } """ keychar = ( "^" | "$" | "\\") <ISO Latin 1 character> event = [ modifier_list ] "<" event_type ">" [ count ] {detail} modifier_list = ( ["!"][":"] { modifier } | "None") modifier = [ "~" ] ( "@" <keysym> | <name from table below>) count = "(" <positive integer> [ "+" ] ")" rhs = { action_name "(" [params] ")" } params = string { "," string } The string field need not be quoted unless it includes a space or tab character, or any comma, newline, or parenthesis. The entire list of string values making up the params field will ba passed to the named action routine. The details field may be used to specify a keysym that will identify a particular key event. For example, <Key> is the name of a type of event, but it must be modified by the details field to name a specific event, such as <Key>A. Modifier Names The modifier list, which may be empty, consists of a list of modifier keys that must be pressed with the key sequence. The modifier keys may abbreviated with single letters, as in the following list of the familiar modifiers: s Shift c or ^ Ctrl (Control) m or $ Meta a Alt Other modifiers are available, such as "Mod5" and "Button2." These have no abbreviation (although the "Button" modifiers may be abbreviated in combination with events, as outlined below). If a modifier list has no entries, and is not "None", it means the position of the modifier keys is irrelevant. If modifiers are listed, the designated keys must be in the specified position, but the unlisted modifier keys are irrelevant. If the list begins with an exclamation point (!), however, the unlisted modifiers may not be asserted. In addition, if a modifier name is preceded by a tilde (~), the corresponding key must not be pressed. If a modifier list begins with a colon (:), X tries to use the standard modifiers (Shift and Lock), if present, to map the key event code into a recognized keysym. Event Types These are a few of the recognized event types. Key or KeyDown A keyboard key was pressed. KeyUp A keyboard key was released. BtnDown A mouse button was pressed. BtnUp A mouse button was released. Motion The mouse pointer moved. Enter The pointer entered the widget's window. Leave The pointer left the widget's window. FocusIn The widget has received focus. FocusOut The widget has lost focus. There are some event abbreviations available. For example, <Btn1Motion> is actually a "Motion" event, modified with the "Button1" modifier (Button1<Motion>). Similarly, <Btn3Up> is actually a "BtnUp" event with the "Button3" modifier. These abbreviations are used extensively in the Motif translation tables.
xmbind(1) VirtualBindings(3)
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.