libsensors - publicly accessible functions provided by the sensors library
#include <sensors/sensors.h> /* Library initialization and clean-up */ int sensors_init(FILE *input); void sensors_cleanup(void); const char *libsensors_version; /* Chip name handling */ int sensors_parse_chip_name(const char *orig_name, sensors_chip_name *res); void sensors_free_chip_name(sensors_chip_name *chip); int sensors_snprintf_chip_name(char *str, size_t size, const sensors_chip_name *chip); const char *sensors_get_adapter_name(const sensors_bus_id *bus); /* Chips and features enumeration */ const sensors_chip_name * sensors_get_detected_chips(const sensors_chip_name *match, int *nr); const sensors_feature * sensors_get_features(const sensors_chip_name *name, int *nr); const sensors_subfeature * sensors_get_all_subfeatures(const sensors_chip_name *name, const sensors_feature *feature, int *nr); const sensors_subfeature * sensors_get_subfeature(const sensors_chip_name *name, const sensors_feature *feature, sensors_subfeature_type type); /* Features access */ char *sensors_get_label(const sensors_chip_name *name, const sensors_feature *feature); int sensors_get_value(const sensors_chip_name *name, int subfeat_nr, double *value); int sensors_set_value(const sensors_chip_name *name, int subfeat_nr, double value); int sensors_do_chip_sets(const sensors_chip_name *name); #include <sensors/error.h> /* Error decoding */ const char *sensors_strerror(int errnum); /* Error handlers */ void (*sensors_parse_error) (const char *err, int lineno); void (*sensors_parse_error_wfn) (const char *err, const char *filename, int lineno); void (*sensors_fatal_error) (const char *proc, const char *err);
sensors_init() loads the configuration file and the detected chips list. If this returns a value unequal to zero, you are in trouble; you can not assume anything will be initialized properly. If you want to reload the configuration file, or load a different configuration file, call sensors_cleanup() below before calling sensors_init() again. This means you can't load multiple configuration files at once by calling sensors_init() multiple times. The configuration file format is described in sensors.conf(5). If FILE is NULL, the default configuration files are used (see the FILES section below). Most applications will want to do that. sensors_cleanup() cleans everything up: you can't access anything after this, until the next sensors_init() call! libsensors_version is a string representing the version of libsensors. sensors_parse_chip_name() parses a chip name to the internal representation. Return 0 on success, <0 on error. Make sure to call sensors_free_chip_name() when you're done with the data. sensors_free_chip_name() frees the memory that may have been allocated for the internal representation of a chip name. You only have to call this for chip names which do not originate from libsensors itself (that is, chip names which were generated by sensors_parse_chip_name()). sensors_snprintf_chip_name() prints a chip name from its internal representation. Note that chip should not contain wildcard values! Return the number of characters printed on success (same as snprintf), <0 on error. sensors_get_adapter_name() returns the adapter name of a bus type, number pair, as used within the sensors_chip_name structure. If it could not be found, it returns NULL. Adapters describe how a monitoring chip is hooked up to the system. This is particularly relevant for I2C/SMBus sensor chips (bus type "i2c"), which must be accessed over an I2C/SMBus controller. Each such controller has a different number, assigned by the system at initialization time, so that they can be referenced individually. Super-I/O or CPU-embedded sensors, on the other hand, can be accessed directly and technically don't use any adapter. They have only a bus type but no bus number, and sensors_get_adapter_name() will return a generic adapter name for them. sensors_get_detected_chips() returns all detected chips that match a given chip name, one by one. If no chip name is provided, all detected chips are returned. To start at the beginning of the list, use 0 for nr; NULL is returned if we are at the end of the list. Do not try to change these chip names, as they point to internal structures! sensors_get_features() returns all main features of a specific chip. nr is an internally used variable. Set it to zero to start at the begin of the list. If no more features are found NULL is returned. Do not try to change the returned structure; you will corrupt internal data structures. sensors_get_all_subfeatures() returns all subfeatures of a given main feature. nr is an internally used variable. Set it to zero to start at the begin of the list. If no more subfeatures are found NULL is returned. Do not try to change the returned structure; you will corrupt internal data structures. sensors_get_subfeature() returns the subfeature of the given type for a given main feature, if it exists, NULL otherwise. Do not try to change the returned structure; you will corrupt internal data structures. sensors_get_label() looks up the label which belongs to this chip. Note that chip should not contain wildcard values! The returned string is newly allocated (free it yourself). On failure, NULL is returned. If no label exists for this feature, its name is returned itself. sensors_get_value() Reads the value of a subfeature of a certain chip. Note that chip should not contain wildcard values! This function will return 0 on success, and <0 on failure. sensors_set_value() sets the value of a subfeature of a certain chip. Note that chip should not contain wildcard values! This function will return 0 on success, and <0 on failure. sensors_do_chip_sets() executes all set statements for this particular chip. The chip may contain wildcards! This function will return 0 on success, and <0 on failure. sensors_strerror() returns a pointer to a string which describes the error. errnum may be negative (the corresponding positive error is returned). You may not modify the result! sensors_parse_error() and sensors_parse_error_wfn() are functions which are called when a parse error is detected. Give them new values, and your own functions are called instead of the default (which print to stderr). These functions may terminate the program, but they usually output an error and return. The first function is the original one, the second one was added later when support for multiple configuration files was added. The library code now only calls the second function. However, for backwards compatibility, if an application provides a custom handling function for the first function but not the second, then all parse errors will be reported using the first function (that is, the filename is never reported.) Note that filename can be NULL (if filename isn't known) and lineno can be 0 (if the error occurs before the actual parsing starts.) sensors_fatal_error() Is a function which is called when an immediately fatal error (like no memory left) is detected. Give it a new value, and your own function is called instead of the default (which prints to stderr and ends the program). Never let it return!
Structure sensors_feature contains information related to a given feature of a specific chip: typedef struct sensors_feature { const char *name; int number; sensors_feature_type type; } sensors_feature; There are other members not documented here, which are only meant for libsensors internal use. Structure sensors_subfeature contains information related to a given subfeature of a specific chip feature: typedef struct sensors_subfeature { const char *name; int number; sensors_subfeature_type type; int mapping; unsigned int flags; } sensors_subfeature; The flags field is a bitfield, its value is a combination of SENSORS_MODE_R (readable), SENSORS_MODE_W (writable) and SENSORS_COMPUTE_MAPPING (affected by the computation rules of the main feature).
/etc/sensors3.conf /etc/sensors.conf The system-wide libsensors(3) configuration file. /etc/sensors3.conf is tried first, and if it doesn't exist, /etc/sensors.conf is used instead. /etc/sensors.d A directory where you can put additional libsensors configuration files. Files found in this directory will be processed in alphabetical order after the default configuration file. Files with names that start with a dot are ignored.
sensors.conf(5)
Frodo Looijaard, Jean Delvare and others http://www.lm-sensors.org/
Personal Opportunity - Free software gives you access to billions of dollars of software at no cost. Use this software for your business, personal use or to develop a profitable skill. Access to source code provides access to a level of capabilities/information that companies protect though copyrights. Open source is a core component of the Internet and it is available to you. Leverage the billions of dollars in resources and capabilities to build a career, establish a business or change the world. The potential is endless for those who understand the opportunity.
Business Opportunity - Goldman Sachs, IBM and countless large corporations are leveraging open source to reduce costs, develop products and increase their bottom lines. Learn what these companies know about open source and how open source can give you the advantage.
Free Software provides computer programs and capabilities at no cost but more importantly, it provides the freedom to run, edit, contribute to, and share the software. The importance of free software is a matter of access, not price. Software at no cost is a benefit but ownership rights to the software and source code is far more significant.
Free Office Software - The Libre Office suite provides top desktop productivity tools for free. This includes, a word processor, spreadsheet, presentation engine, drawing and flowcharting, database and math applications. Libre Office is available for Linux or Windows.
The Free Books Library is a collection of thousands of the most popular public domain books in an online readable format. The collection includes great classical literature and more recent works where the U.S. copyright has expired. These books are yours to read and use without restrictions.
Source Code - Want to change a program or know how it works? Open Source provides the source code for its programs so that anyone can use, modify or learn how to write those programs themselves. Visit the GNU source code repositories to download the source.
Study at Harvard, Stanford or MIT - Open edX provides free online courses from Harvard, MIT, Columbia, UC Berkeley and other top Universities. Hundreds of courses for almost all major subjects and course levels. Open edx also offers some paid courses and selected certifications.
Linux Manual Pages - A man or manual page is a form of software documentation found on Linux/Unix operating systems. Topics covered include computer programs (including library and system calls), formal standards and conventions, and even abstract concepts.